Buchumschlag

New possibilities of additive manufacturing using xBeam 3D Metal Printing technology (Rreview)

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	D. V. Kovalchuk, V. I. Melnik, I. V. Melnik, B. A. Tugaj
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000814924
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

xBeam 3D Metal Printing technology on the path to industrial production
von: D. V. Kovalchuk, et al.
Veröffentlicht: (2020)

Новые возможности аддитивного производства с технологий xBeam 3D Metal Printing (Обзор)
von: Ковальчук, Д.В., et al.
Veröffentlicht: (2017)

Additive electron beam technology of manufacture of metal products from powder materials
von: K. A. Yushchenko, et al.
Veröffentlicht: (2022)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: K. V. Avramov, et al.
Veröffentlicht: (2021)

On enhancing the technological capabilities of modern gas-discharge electron beam guns
von: V. I. Melnik, et al.
Veröffentlicht: (2015)

Manufacture of industrial products using electron beam technologies for 3d-printing
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2018)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)

TECHNOLOGY OF QUALITY CONTROL OF ADDITIVE MANUFACTURING PRODUCTS DURING PRINTING OF ELEMENTS OF ENERGY COMPLEXES
von: Romanenko, Vladyslav, et al.
Veröffentlicht: (2024)

Additive manufacturing of titanium-based materials using electron beam wire 3D printing approach: peculiarities, advantages, and prospects
von: O. M. Ivasishin, et al.
Veröffentlicht: (2023)

Application of ultrasonic surface treatment technologies in metals and alloys additive manufacturing
von: S. M. Voloshko, et al.
Veröffentlicht: (2024)

Development of automated equipment for manufacturing 3D metal products based on additive technologies
von: V. N. Korzhik, et al.
Veröffentlicht: (2017)

Evaluation of the possibility of manufacturing and repairing engine parts from aluminium alloys by method of additive technology
von: M. O. Gnatenko, et al.
Veröffentlicht: (2018)

Use of welding additive technologies in manufacture of metal parts of a complex shape (Review)
von: A. S. Novodranov, et al.
Veröffentlicht: (2023)

Application of additive electron beam technologies for manufacture of parts of VT1-0 titanium alloy powders
von: V. M. Nesterenkov, et al.
Veröffentlicht: (2017)

The Digital Twin and Optimization of Cast Metal Structures in Additive Manufacturing
von: Doroshenko, V.S., et al.
Veröffentlicht: (2020)

The Digital Twin and Optimization of Cast Metal Structures in Additive Manufacturing
von: V. S. Doroshenko, et al.
Veröffentlicht: (2020)

Progress in additive manufacturing
von: A. V. Volokitin, et al.
Veröffentlicht: (2023)

Additive technology: prospects and challenges 3D-print (First part)
von: H. O. Androshchuk
Veröffentlicht: (2017)

Additive technology: prospects and challenges 3D-print (Second part)
von: H. O. Androshchuk
Veröffentlicht: (2017)

TECHNOLOGY OF QUALITY CONTROL OF ADDITIVE PRODUCTION PRODUCTS DURING PRINTING OF ELEMENTS OF ENERGY COMPLEXES
von: Romanenko, Vladyslav
Veröffentlicht: (2024)

New approach for manufacturing Ti–6Al–4V+40%TiC metal-matrix composites by 3D printing using conic electron beam and cored wire. Pt. 2: Layered MMC/alloy materials, their main characteristics, and possible application as ballistic resistant materials
von: P. E. Markovsky, et al.
Veröffentlicht: (2023)

Additive manufacturing as a growing global industry
von: V. S. Doroshenko
Veröffentlicht: (2016)

Influence of technological parameters on metal density at large ingots manufacturing
von: M. V. Efimov, et al.
Veröffentlicht: (2017)

Investigation of possibilities of using parallel computing for simulation of technological gas-discharge electron sources
von: I. V. Melnik, et al.
Veröffentlicht: (2016)

Metal products manufactured with arc 3D robotic technology
von: E. V. Shapovalov, et al.
Veröffentlicht: (2024)

Linear Vibrations Analysis of a Composite Sandwich Conical Shell Manufactured by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2026)

Linear Vibrations Analysis of a Composite Sandwich Conical Shell Manufactured by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2026)

Basics of additive manufacturing processes for high-entropy alloys
von: A. V. Zavdoveev, et al.
Veröffentlicht: (2023)

Plasma technologies for manufacturing of micro-strip metal detectors of ionizing radiation
von: Pugatch, V.M., et al.
Veröffentlicht: (2007)

Electrically conductive composites based on TiO2 and carbon nanostructures manufactured using 3D printing of CJP technology
von: Ol. D. Zolotarenko, et al.
Veröffentlicht: (2022)

Using the theory of growing bodies in calculation of stress-strain states of the parts, manufactured applying additive surfacing technologies
von: I. K. Senchenkov, et al.
Veröffentlicht: (2016)

On possibility of high frequency electron beam scanning with application of focusing system for X-ray generation
von: Bondarenko, T.V.
Veröffentlicht: (2014)

A perspective of the needs and opportunities for coupling materials science and nondestructive evaluation for metals-based additive manufacturing information
von: M. J. Quintana, et al.
Veröffentlicht: (2023)

Technology and equipment for manufacture of high-pressure cylinder bodies of sheet rolled metal
von: M. M. Savitskij, et al.
Veröffentlicht: (2010)

Technology for manufacturing thermoelectric microthermopiles
von: L. I. Anatychuk, et al.
Veröffentlicht: (2016)

3D printing of metallic volumetric parts of complex shape based on welding plasma-arc technologies (Review)
von: V. N. Korzhik, et al.
Veröffentlicht: (2016)

Improved technology of track membranes manufacture
von: Ye. Borzakovskyi, et al.
Veröffentlicht: (2018)

New approach for manufacturing Ti–6Al–4V+40%TiC metalmatrix composites by 3D printing using conic electron beam and cored wire. Pt. 1: Main features of the process, microstructure formation and basic characteristics of 3D printed material
von: P. E. Markovsky, et al.
Veröffentlicht: (2023)

Possible directions of electron gun with a wide beam application for radiating technologies and medicine
von: Koroliov, A.N., et al.
Veröffentlicht: (1999)