Buchumschlag

Mathematical modeling of heat exchanger with liquid flow for tube with polyzone finning

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	K. V. Maksimenko-Shejko, Ju. S. Litvinova, T. I. Shejko, M. A. Khazhmuradov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Journal of mechanical engineering
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000821583
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Mathematical modeling of heat exchanger with liquid flow for tube with polyzone finning
von: Максименко-Шейко, К. В., et al.
Veröffentlicht: (2018)

Mathematical modeling of heat exchanger with liquid flow for tube with polyzone finning
von: Максименко-Шейко, К. В., et al.
Veröffentlicht: (2018)

The R-functions method in mathematical modelling of heat exchange at incompressible viscous liquid movement in cylindrical channels with central screw inserts
von: K. V. Maksimenko-Shejko
Veröffentlicht: (2010)

The mathematical and computer modelling of the building constructions on the R-functions basis
von: Ju. S. Litvinova, et al.
Veröffentlicht: (2014)

Intensification of heat transfer in liquid heat exchangers with dimple-pin finning
von: V. E. Trofimov, et al.
Veröffentlicht: (2016)

The R-functions method in mathematical modelling of convective heat transfer in the octahedral fuel cartridge with 37 fuel rods
von: R. A. Koljada, et al.
Veröffentlicht: (2016)

The R-functions using at building constructions modeling
von: Ju. S. Litvinova, et al.
Veröffentlicht: (2014)

Mathematical modelling of electromagnetic fields in fractal-type regular waveguides by R-functions method
von: K. V. Maksimenko-Shejko, et al.
Veröffentlicht: (2010)

Mathematical modeling of thermal conditions of electronic boards with sources distribution as the &quot;Sierpinski&#039;s carpet&quot;
von: K. V. Maksimenko-Shejko, et al.
Veröffentlicht: (2012)

Mathematical modeling of the automobile bodies with the help of R-functions
von: D. A. Lisin, et al.
Veröffentlicht: (2013)

Analytical identification of three-dimensional geometric objects by information about the shape of their cross-sections
von: Ju. S. Litvinova, et al.
Veröffentlicht: (2017)

Influence of eccentricity on heat transfer in borehole counterflow heat exchanger of tube-in-tube type
von: Бучко, А. В., et al.
Veröffentlicht: (2016)

Influence of eccentricity on heat transfer in borehole counterflow heat exchanger of tube-in-tube type
von: Бучко, А. В., et al.
Veröffentlicht: (2016)

Influence of eccentricity on heat transfer in borehole counterflow heat exchanger of tube-in-tube type
von: A. V. Buchko, et al.
Veröffentlicht: (2016)

CFD modeling of heat transfer in a rectangular channel with dimplepin finning
von: Ju. Spokojnyj, et al.
Veröffentlicht: (2013)

R-functions and chevron surfaces in machine building
von: T. I. Shejko, et al.
Veröffentlicht: (2017)

Enhancing the Efficiency of the Turbogenerator Cooling System Through the Use of Finned Tubes in the Gas Cooler
von: Шестак, Б. К.
Veröffentlicht: (2026)

Enhancing the Efficiency of the Turbogenerator Cooling System Through the Use of Finned Tubes in the Gas Cooler
von: Шестак, Б. К.
Veröffentlicht: (2026)

Mathematical modeling of the heating process in a vortex tube at the gas distribution stations
von: V. Y. Labay, et al.
Veröffentlicht: (2019)

Heat transfer at the cross flow of tube with an artificial asymmetry
von: A. A. Khalatov, et al.
Veröffentlicht: (2017)

Combined Researches of Heat- and Hydraulic Perfection of High-Temperature Tube Recuperative Heat Exchangers
von: B. S. Soroka, et al.
Veröffentlicht: (2014)

Simulation of flow and heat transfer in bare tubes atsupercritical pressure
von: N. M. Fialko, et al.
Veröffentlicht: (2016)

Optimization of heat exchange system of thermoelectric liquid-liquid heat pump
von: L. I. Anatychuk, et al.
Veröffentlicht: (2018)

Optimization of heat exchange system of thermoelectric liquid-liquid heat pump
von: L. I. Anatychuk, et al.
Veröffentlicht: (2018)

Effect of Defects on Stress-Strain State of Heat Exchange Tubes of Steam Generators
von: P. Z. Luhovyi, et al.
Veröffentlicht: (2021)

CFD modeling of heat transfer under flow of supercritical parameters water in vertical bare tubes
von: N. M. Fialko, et al.
Veröffentlicht: (2018)

The influence of quality of heat exchangers on the properties of thermoelectric liquid-liquid heat pumps
von: L. I. Anatychuk, et al.
Veröffentlicht: (2017)

The influence of quality of heat exchangers on the properties of thermoelectric liquid-liquid heat pumps
von: L. I. Anatychuk, et al.
Veröffentlicht: (2017)

Effect of Slime Layer on the Stress-Strain State of Heat Exchange Tubes in Steam Generator
von: P. Z. Lugovoj, et al.
Veröffentlicht: (2019)

Numerical simulation of heat transfer and hydrodynamics in round tube with inclined-tangential flow swirl at the inlet
von: A. A. Khalatov, et al.
Veröffentlicht: (2015)

Heat Exchange and Injected into Underground Aquifer Liquid Dynamics
von: B. I. Basok, et al.
Veröffentlicht: (2011)

Effect of mass flux on flow characteristic and heat transfer in bare tubes at supercritical parameters
von: N. M. Fialko, et al.
Veröffentlicht: (2016)

Structural difference approach to mathematical modeling high heat exchange processes with unsteady heat transfer on the surface of constructive elements
von: A. P. Slesarenko, et al.
Veröffentlicht: (2011)

Efects of heat flux in the channel wall and water pressure on the characteristics of flow and heat transfer in bare tubes at supercritical parameters
von: N. M. Fialko, et al.
Veröffentlicht: (2016)

Modeling of nonstationary thermal processes in the plate heat exchangers, taking into account the external flow
von: A. A. Chirva
Veröffentlicht: (2014)

Main Results of Assessing Integrity of RNPP-3 Steam Generator Heat Exchange Tubes in Accident Management
von: A. P. Shugajlo, et al.
Veröffentlicht: (2017)

Numerical modeling and experimental investigation of heat exchange and hydrodynamics process in heat exchanger of new design
von: V. G. Gorobets, et al.
Veröffentlicht: (2016)

Mathematical model and generalized solution method Dirichle problems of heat exchange of radiation body
von: M. H. Berdnyk
Veröffentlicht: (2017)

Modeling of heat transfer in composite bodies reinforced with tubes with swirlers through which the twisted liquid heat-transfer agent moves in turbulent regime. II. Model problem
von: A. P. Jankovskij
Veröffentlicht: (2020)

Mathematical Model of the Information Flow
von: Yu. V. Kabanenko
Veröffentlicht: (2013)