Cover Image

Experience in developing the oxygen lance with tip central cooling

Saved in:

Bibliographic Details
Date:	2017
Main Author:	A. G. Chernjatevich
Format:	Article
Language:	English
Published:	2017
Series:	Fundamental and applied problems of ferrous metallurgy
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000843959
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

The operating results of the experimental oxygen lance
by: K. G. Nizjaev, et al.
Published: (2014)

High temperature modeling of BOF bath blowing by using three-level oxygen lance
by: A. G. Chernjatevich, et al.
Published: (2017)

Thermodynamic and high-temperature simulation of converter bath combined blowing by a three-level oxygen lance
by: A. G. Chernjatevich, et al.
Published: (2017)

The new technologies and lance improvement for the converter slag scull coating
by: A. G. Chernjatevich
Published: (2014)

Evaluation of influence of multilevel oxygen lance constructions on blowing efficiency of converter bath with post-combustion of waste gases
by: L. S. Molchanov, et al.
Published: (2018)

Trends of the technology development of the converter bath combined blowing by oxygen and inert gas
by: A. G. Chernjatevich
Published: (2014)

High-temperature study of the features of metal blowing in the converter through the top oxygen lance with an annular slit nozzle
by: S. I. Semykin, et al.
Published: (2018)

Calculation of the motion of magnesium particles in the channel two -nozzles lance
by: V. I. Eliseev, et al.
Published: (2014)

Development of energy efficient technology of combined blowing of converter bath by oxygen and neutral gases
by: A. G. Chernjatevich, et al.
Published: (2018)

Comparison of various parameters of the lance design for injection granulated magnesium in hot metal
by: A. F. Shevchenko, et al.
Published: (2014)

Effect of cooling regimens on content of reactive oxygen species in Candida albicans cells
by: Ju. Sirenko, et al.
Published: (2009)

Comparison of various parameters of the lance design for injection granulated magnesium in hot metal
by: V. P. Piptjuk, et al.
Published: (2014)

Plastic zones development at fractures threshold at tip of square notch
by: V. Kryven, et al.
Published: (2015)

Thermal spraying of coatings with application of tips
by: A. P. Murashov
Published: (2012)

Determining the speed of particles in two-phase flow applied to magnesium-line of two-nozzle lance
by: A. P. Tolstopjat, et al.
Published: (2012)

The model of Central libraries for national minorities in Croatia: experience and strategy development
by: K. Todortsev-Khlacha
Published: (2016)

Regular character of pig iron desulphurization by granulated magnesium injection through two-nozzle lances into the ladles of medium sizes
by: A. F. Shevchenko, et al.
Published: (2017)

Physicochemical processes in the oxygen converter cavity during bath purging with afterburning of exhaust gases
by: A. G. Chernjatevich, et al.
Published: (2019)

Evaluation of hydrogen concentration in the process zone at the crack tip
by: Ya. L. Ivanytskyi, et al.
Published: (2010)

Ten years experience in hyperbaric oxygenation therapy of acute carbon monoxide intoxication
by: Bozov, C.S., et al.
Published: (2007)

Field emission of electrons from laser produced silicon tip arrays
by: Evtukh, A.A., et al.
Published: (2000)

Cataloging of serials in the Central Scientific Library of NAS of Belarus. Experience and prospects of development
by: V. V. Mykhlik, et al.
Published: (2016)

Dynamics of oscillations of the &quot;liquid bath - lance&quot; system during injection processing of the melt in the ledle
by: V. I. Yelisieiev, et al.
Published: (2020)

The influence of heating of mist flow in a ladle lance on the impulse of gas suspension jet that flows into the melt. Report 2
by: N. V. Kosolap, et al.
Published: (2012)

Quantum interference effects in a system of two tunnel point-contacts in the presence of single scatterer: simulation of a double-tip STM experiment
by: Khotkevych, N.V., et al.
Published: (2011)

Influence of the process zone at the tip of an interfacial crack on the condition of its advancement
by: A. A. Kaminskij, et al.
Published: (2014)

The Role of Industry in Ensuring Sustainable Development: the Experience of Smart Prioritisation in Central and Eastern Europe
by: N. V. Shvets, et al.
Published: (2022)

Non-economic factors in the European integration development: the experience of the Central and Eastern European countries
by: V. R. Sidenko
Published: (2014)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
by: M. A. Chugaj
Published: (2014)

Mathematical mode of deformation state of roof rock in workings, tip by anchors
by: A. O. Novikov, et al.
Published: (2014)

Progress of Plastic Zone Near a Tip of Crack with Contacting Faces
by: A. O. Kaminsky, et al.
Published: (2024)

The strip dielectric breakdown model at the crack tip in a piezoelectric material
by: V. B. Govorukha
Published: (2010)

The strip dielectric breakdown model at the crack tip in a piezoelectric material
by: Говоруха, В. Б.
Published: (2017)

The strip dielectric breakdown model at the crack tip in a piezoelectric material
by: Говоруха, В. Б.
Published: (2017)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
by: Чугай, А. М.
Published: (2014)

Features of modeling of stress in vinicity of crack tip at vibrations of turbomashine blading
by: Чугай, А. М.
Published: (2014)

Technological characteristics of automatic submerged-arc surfacing with high-frequency oscillations of electrode tip
by: V. A. Lebedev, et al.
Published: (2014)

On the evolution of the prefracture zone near the crack tip in a nonlinear anisotropic body
by: A. A. Kaminskij, et al.
Published: (2018)

Behavior of oxygen and nitrogen in the melt during oxygen-converter heat
by: S. I. Semykin, et al.
Published: (2017)

Theoretical study of tunnel current behaviour in scanning probe microscope with diamond tip
by: V. Grushko, et al.
Published: (2011)