Cover Image

The estimation method to determine the influence of the factors in hot-rolled metal production technology on the stability of the mechanical properties

Saved in:

Bibliographic Details
Date:	2017
Main Authors:	S. A. Vorobej, V. G. Razdobreev, D. G. Palamar
Format:	Article
Language:	English
Published:	2017
Series:	Fundamental and applied problems of ferrous metallurgy
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000843968
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
by: V. H. Razdobrieiev, et al.
Published: (2022)

Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products
by: V. H. Razdobrieiev, et al.
Published: (2019)

The main directions of research and experimental development on section rolling and metalware industries in the department of metal forming
by: S. A. Vorobej, et al.
Published: (2014)

Influence of thermal strengthening technology on variability of mechanical properties of rolled metal product
by: E. V. Parusov, et al.
Published: (2020)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
by: L. K. Leshchynskyi, et al.
Published: (2021)

Integrated methods for estimation the efficiency of production of flat rolled steel in different integrated units for casting and rolling processing combination
by: S. A. Vorobej, et al.
Published: (2013)

Preparation of the surface of hot-rolled strips for hot-dip galvanized
by: V. G. Ivanchenko
Published: (2014)

Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680
by: Ju. Prikhodko, et al.
Published: (2019)

Manufacture of wire rods with extended dimensions and grades in the view of rational parameters of sizing and desired rolling accuracy
by: A. A. Gorbanev, et al.
Published: (2017)

Production Efficiency of Ribbon-Type Sections by the Drawing Method in Doubled-Roll Roller Dies
by: V. G. Razdobreev, et al.
Published: (2023)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
by: S. E. Kondratiuk, et al.
Published: (2016)

Peculiarities of formation of joints between dissimilar metals in vacuum hot roll welding
by: I. M. Nekljudov, et al.
Published: (2011)

Training hot rolled strips and sheets of especially thin
by: V. S. Panchenko, et al.
Published: (2014)

Formation of compounds of dissimilar metals in a solid phase by the method of hot rolling in vacuum
by: B. V. Borts
Published: (2011)

Mechanisms of structure formation in hot-rolled boiler tubes during their production from non-deformed continuously cast billets
by: L. V. Opryshko, et al.
Published: (2015)

Peculiarities of technology of production of sheet rolled metal from wastes of titanium sponge and its products
by: V. S. Konstantinov, et al.
Published: (2009)

Influence of nonmetallics on formation of pores during hot rolling of bearing steel
by: O. M. Moroz, et al.
Published: (2015)

Classification of surface technological defects of metal roll in metal-roll by means of deep neuron network
by: I. V. Konovalenko, et al.
Published: (2020)

Investigation of thermal stability of deposited metal designed for restoration of mill rolls
by: A. A. Babinets, et al.
Published: (2014)

The technological efficiency analysis of different ways hot metal desulfurization
by: L. S. Molchanov, et al.
Published: (2014)

Strip rolling process stability estimation by the torque in the rollers driving line
by: V. V. Verenev, et al.
Published: (2013)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
by: A. M. Nesterenko, et al.
Published: (2009)

Determination of the heat transfer coefficient in the metal-roll system at twin-roll casting of aluminum alloys
by: S. V. Bondarenko, et al.
Published: (2013)

Increased durability and efficiency of the use of circular hot saws in a modern rolling mill
by: G. V. Bergeman
Published: (2016)

Neutral corner while rolling in the non-driving rolls
by: A. I. Leshchenko, et al.
Published: (2012)

Definition of speed limits continuous high-speed rolling of wire of a various diameter at use reducucing-calibration of the block
by: A. A. Gorbanev, et al.
Published: (2015)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
by: Ju. Prikhodko, et al.
Published: (2013)

Technological process control system (local) for hot breakdown bars cutting at the blooming shears in the sheet-rolling shop 1700
by: N. A. Kelij, et al.
Published: (2012)

Hot-cracking of high-alloyed steels evaluated by wedge rolling test
by: Schindler, I., et al.
Published: (2008)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
by: Makeeva, A.S., et al.
Published: (2016)

Pecularities of electron beam welding of hot-rolled aluminum-lithium alloys
by: D. Drimal, et al.
Published: (2019)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
by: A. S. Makeeva, et al.
Published: (2016)

Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
by: Guan, B., et al.
Published: (2018)

Determination of the productivity of producing metal nanoparticles by EB PVD technology
by: O. V. Hornostai
Published: (2023)

The implementation of the thermomechanical controlled rolling technology in rolling mill 1700
by: A. G. Kurpe, et al.
Published: (2017)

Problems of rolling schedule choosing with switching of light section and wire rod mills to continuously cast blank
by: S. A. Vorobej, et al.
Published: (2012)

Process and property of hot-rolled stainless steel/carbon steel cladding bar
by: Zhining Jia, et al.
Published: (2016)

Generalization of research results on the dynamics of continuous wide-strip hot-rolling mills
by: V. V. Verenev
Published: (2018)

Improved hot pilger tube rolling by controlling the clearance between the sleeve and the dorn
by: V. F. Balakin, et al.
Published: (2015)

Complex desulfurization and degassing of hot metal with magnesium
by: A. S. Vergun, et al.
Published: (2018)