Cover Image

Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process

Saved in:

Bibliographic Details
Date:	2017
Main Authors:	P. G. Matjukha, V. V. Poltavets
Format:	Article
Language:	English
Published:	2017
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000850137
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Diamond grinding of the WC–8Co–steel 45 composition using the control of the wheel cutting ability by an electroerosion method
by: A. V. Burdin, et al.
Published: (2013)

Optimization of diamond grinding conditions for steel R6M5F3 allowing for the process unsteadiness
by: V. V. Poltavets, et al.
Published: (2013)

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
by: V. I. Lavrinenko, et al.
Published: (2022)

Determining cutting force components in deep grinding of revolution surfaces by oriented el&#039;bor wheel
by: V. I. Kalchenko, et al.
Published: (2012)

Grinding of gear wheels by diamond-abrasive wheels
by: S. V. Rjabchenko
Published: (2017)

Gear grinding with superabrasive dish wheels
by: S. V. Rjabchenko
Published: (2014)

Gear grinding with superabrasive dish wheels
by: S. V. Rjabchenko
Published: (2014)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
by: S. V. Rjabchenko, et al.
Published: (2018)

Allowance for heat and vibration parameters variation of electric machines with extended failure interval
by: Somka, O. O., et al.
Published: (2014)

Wear of a diamond wheel during grinding of ceramic balls from silicon carbide
by: S. V. Sokhan, et al.
Published: (2020)

Specifying the process parameters for diamond dressing of grinding wheels
by: Ya. O. Shakhbazov, et al.
Published: (2019)

The quality of workpiece surface in rough machining of materials with different hardness values by using segmented grinding wheels produced in Vietnam
by: T. P.G. Nguen
Published: (2016)

Highly porous cubic boron nitride wheels for dry grinding
by: V. K. Starkov
Published: (2013)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
by: A. A. Adamovskij, et al.
Published: (2015)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
by: V. I. Lavrinenko
Published: (2019)

Intellectual System of Refusals Diagnosing and Cutting Part of Cutting Tools Renewal
by: A. G. Derevjanchenko
Published: (2013)

Allowance for the construction of windings of asynchronous machine in Matlab modeling
by: O. A. Zakharzhevskij, et al.
Published: (2014)

Oxidation or oxide materials in the machining zone in superabrasive grinding—a factor of influence on the grinding performance
by: V. I. Lavrinenko, et al.
Published: (2016)

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding
by: V. I. Lavrinenko
Published: (2016)

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
by: V. I. Lavrinenko, et al.
Published: (2021)

Abrasive ability of staurolite mineral concentrate*. use of stavrolit in abrasive pastes and in grinding tools
by: V. G. Poltoratskij, et al.
Published: (2019)

The influence of machining conditions on performance of diamond grinding of silicon carbide ceramic balls
by: S. V. Sokhan, et al.
Published: (2018)

Rotational scheme of a high-efficient dressing of grinding wheels from cubic boron nitride
by: D. Hessel, et al.
Published: (2015)

Determination of the boundaries of plastic zone of metal deformation during the cutting
by: M. O. Kurin
Published: (2020)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
by: V. I. Lavrinenko, et al.
Published: (2016)

Influence of the prescribed composition on hardness of a grinding wheel with a decreased concentration of cubic boron nitride
by: V. K. Starkov, et al.
Published: (2015)

The prognostication of the rooting ability of apple stem cuttings by indices of seasonal growth of shoots
by: A. Konopelko
Published: (2021)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
by: Ye. Stakhniv, et al.
Published: (2022)

Productivity and specific cost of the internal infeed diamond grinding of hard alloys with periodic electroerosion influences
by: V. V. Gabitov, et al.
Published: (2012)

Thermoelectric phenomena in machining processes and a study of their functioning in superabrasive grinding
by: V. I. Lavrinenko, et al.
Published: (2015)

The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
by: A. M. Kuzej, et al.
Published: (2019)

СNB wheels for grinding high-speed steel without cooling: specific processing energy and energy efficiency
by: V. I. Lavrinenko
Published: (2024)

Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
by: Jaworski, J., et al.
Published: (2016)

Determining the conditions for achieving the plastic mode of diamond grinding of ceramic materials from the standpoint of estimating energy costs during processing
by: V. I. Lavrinenko, et al.
Published: (2023)

Mechanical stresses distribution in tyre during its pressing at wheel centre of electric lokomotive
by: V. R. Skalskyi, et al.
Published: (2017)

Influence of quantity binder of TN65 on holding of SiC particles in the composite during its grinding
by: V. P. Bondarenko, et al.
Published: (2016)

The process of abrasive processing as frictional interaction: a factor of the sludge availability on the cutting surface of diamond wheels
by: V. I. Lavrinenko
Published: (2020)

Influence of laser radiation on the reliability of the cutting tool of mining machines
by: V. F. Gankevich, et al.
Published: (2017)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 1. Superabrasive composites
by: V. I. Lavrinenko
Published: (2019)

Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
by: Зульфугаров, Э. И.
Published: (2014)