Buchumschlag

Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	P. G. Matjukha, V. V. Poltavets
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000850137
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Diamond grinding of the WC–8Co–steel 45 composition using the control of the wheel cutting ability by an electroerosion method
von: A. V. Burdin, et al.
Veröffentlicht: (2013)

Optimization of diamond grinding conditions for steel R6M5F3 allowing for the process unsteadiness
von: V. V. Poltavets, et al.
Veröffentlicht: (2013)

Peculiarities of shape change of the cutting surface of the grinding wheel in the circular direction when grinding wheels with a mixture of SHM grinding powders and with a modified surface of their grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2022)

Determining cutting force components in deep grinding of revolution surfaces by oriented el&#039;bor wheel
von: V. I. Kalchenko, et al.
Veröffentlicht: (2012)

Grinding of gear wheels by diamond-abrasive wheels
von: S. V. Rjabchenko
Veröffentlicht: (2017)

Gear grinding with superabrasive dish wheels
von: S. V. Rjabchenko
Veröffentlicht: (2014)

Gear grinding with superabrasive dish wheels
von: S. V. Rjabchenko
Veröffentlicht: (2014)

The finish grinding process of cylindrical surfaces by cup grinding diamond wheels
von: S. V. Rjabchenko, et al.
Veröffentlicht: (2018)

Allowance for heat and vibration parameters variation of electric machines with extended failure interval
von: Somka, O. O., et al.
Veröffentlicht: (2014)

Wear of a diamond wheel during grinding of ceramic balls from silicon carbide
von: S. V. Sokhan, et al.
Veröffentlicht: (2020)

Specifying the process parameters for diamond dressing of grinding wheels
von: Ya. O. Shakhbazov, et al.
Veröffentlicht: (2019)

The quality of workpiece surface in rough machining of materials with different hardness values by using segmented grinding wheels produced in Vietnam
von: T. P.G. Nguen
Veröffentlicht: (2016)

Highly porous cubic boron nitride wheels for dry grinding
von: V. K. Starkov
Veröffentlicht: (2013)

Adhesively active dressing of conventional abrasive and diamond grinding wheels
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015)

Porosity and water absorbability of tool composite materials as factors of improving wear resistance of superabrasive grinding wheels. Part 3. Cutting-tool ceramic composites
von: V. I. Lavrinenko
Veröffentlicht: (2019)

Intellectual System of Refusals Diagnosing and Cutting Part of Cutting Tools Renewal
von: A. G. Derevjanchenko
Veröffentlicht: (2013)

Allowance for the construction of windings of asynchronous machine in Matlab modeling
von: O. A. Zakharzhevskij, et al.
Veröffentlicht: (2014)

Oxidation or oxide materials in the machining zone in superabrasive grinding—a factor of influence on the grinding performance
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2016)

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding
von: V. I. Lavrinenko
Veröffentlicht: (2016)

Features of connection between parameters of roughness of the processed surface at grinding by wheels from a mix of grinding powders of SHM with the modified surface of grains
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2021)

Abrasive ability of staurolite mineral concentrate*. use of stavrolit in abrasive pastes and in grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2019)

The influence of machining conditions on performance of diamond grinding of silicon carbide ceramic balls
von: S. V. Sokhan, et al.
Veröffentlicht: (2018)

Rotational scheme of a high-efficient dressing of grinding wheels from cubic boron nitride
von: D. Hessel, et al.
Veröffentlicht: (2015)

Determination of the boundaries of plastic zone of metal deformation during the cutting
von: M. O. Kurin
Veröffentlicht: (2020)

On the use of variously dispersed powders from compacts of synthetic and natural diamonds with carbon binder in grinding wheels
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2016)

Influence of the prescribed composition on hardness of a grinding wheel with a decreased concentration of cubic boron nitride
von: V. K. Starkov, et al.
Veröffentlicht: (2015)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

Productivity and specific cost of the internal infeed diamond grinding of hard alloys with periodic electroerosion influences
von: V. V. Gabitov, et al.
Veröffentlicht: (2012)

Thermoelectric phenomena in machining processes and a study of their functioning in superabrasive grinding
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2015)

Analysis of Cutting Surface During Cutting of Electric Sheets
von: Spišák, E., et al.
Veröffentlicht: (2017)

The prognostication of the rooting ability of apple stem cuttings by indices of seasonal growth of shoots
von: A. Konopelko
Veröffentlicht: (2021)

The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
von: A. M. Kuzej, et al.
Veröffentlicht: (2019)

СNB wheels for grinding high-speed steel without cooling: specific processing energy and energy efficiency
von: V. I. Lavrinenko
Veröffentlicht: (2024)

Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
von: Jaworski, J., et al.
Veröffentlicht: (2016)

Mechanical stresses distribution in tyre during its pressing at wheel centre of electric lokomotive
von: V. R. Skalskyi, et al.
Veröffentlicht: (2017)

Determining the conditions for achieving the plastic mode of diamond grinding of ceramic materials from the standpoint of estimating energy costs during processing
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2023)

Influence of quantity binder of TN65 on holding of SiC particles in the composite during its grinding
von: V. P. Bondarenko, et al.
Veröffentlicht: (2016)

Influence of laser radiation on the reliability of the cutting tool of mining machines
von: V. F. Gankevich, et al.
Veröffentlicht: (2017)

The process of abrasive processing as frictional interaction: a factor of the sludge availability on the cutting surface of diamond wheels
von: V. I. Lavrinenko
Veröffentlicht: (2020)

Thermoelastic stress state in the brake drum with prefracture zone at braking the wheel machine
von: Зульфугаров, Э. И.
Veröffentlicht: (2014)