Modelling of phase transition and residual stresses in construction elements subjected to thermal loading

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	O. Hachkevych, B. Drobenko, V. Astashkin, S. Budz, I. Budz, I. Chupyk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Physico-mathematical modelling and informational technologies
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000862021
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Residual structural stresses in glass bodies
von: S. F. Budz, et al.
Veröffentlicht: (2014)

Mathematical modelling of deformation of structural elements subjected to thermal-power loading
von: B. Drobenko, et al.
Veröffentlicht: (2014)

Modeling of Thermomechanical Processes in Energetic Equipment Elements Under In-Service Conditions and Estimation of their Operational Life with Accounting for a Material Degradation, Damages and Repair Procedures
von: B. D. Drobenko, et al.
Veröffentlicht: (2013)

The stress state of nozzles with local extraction of defects
von: B. D. Drobenko, et al.
Veröffentlicht: (2018)

Assessment of suitability of screen tubes with damages for further use on the basis of mathematical modeling
von: B. Drobenko, et al.
Veröffentlicht: (2019)

Refined calculation of the resource of the drum caldron with operational damages
von: B. D. Drobenko, et al.
Veröffentlicht: (2012)

Evaluation of the possibility of further use of collectors of the primary steam superheaters with operating damages
von: V. I. Astashkin, et al.
Veröffentlicht: (2018)

Modeling of the stress and phase state of the titanium nickelide plate under thermo-mechanical loading
von: Ye. Onyshko, et al.
Veröffentlicht: (2019)

Residual thermal stresses in hard alloys with a mesostructure
von: N. V. Lytoshenko, et al.
Veröffentlicht: (2024)

Thermomechanical models for layered solids subjected to thermal radiation
von: O. Hachkevych, et al.
Veröffentlicht: (2014)

Residual thermal stresses in a three-phase cermet composite with a layer-structured refractory component
von: V. P. Bondarenko, et al.
Veröffentlicht: (2019)

Mathematical modeling of residual stresses in WWER-1000 elements after heat treatment
von: O. V. Makhnenko, et al.
Veröffentlicht: (2021)

Effect of vibrotreatment on fatigue resistance and damping capacity of structural elements with residual stresses
von: V. A. Degtjarev
Veröffentlicht: (2017)

Mathematical model of optimization of annealing regimes by the stress state for heat-sensitive glass elements of structures
von: O. Hachkevych, et al.
Veröffentlicht: (2018)

The stress state of the viscoelastic layer on the rigid base subjected to concentrated cyclic load
von: I. S. Skorodynskyi, et al.
Veröffentlicht: (2020)

Size Dependence of Residual Thermal Stresses in Micro Multilayer Ceramic Capacitors by Using Finite Element Unit Cell Model Including Strain Gradient Effect
von: V. G. Dzhiang, et al.
Veröffentlicht: (2013)

Size Dependence of Residual Thermal Stresses in Micro Multilayer Ceramic Capacitors by Using Finite Element Unit Cell Model Including Strain Gradient Effect
von: Jiang, W.G., et al.
Veröffentlicht: (2013)

General approach to modeling and determination of the residual stresses
von: M. M. Nykolyshyn, et al.
Veröffentlicht: (2015)

Stress-stain state of elements of building structures during the fire
von: O. O. Buryk, et al.
Veröffentlicht: (2014)

Method of Prevention of Fracture of Welded Metal Structural Elements Subjected to Single Dynamic Loads
von: Kir’yan, V.I., et al.
Veröffentlicht: (2002)

Estimation of thermal residual stresses in thin cobalt bond layers of the WC–Co hardmetal
von: N. V. Lytoshenko
Veröffentlicht: (2019)

Phase transitions in thermally annealed films of Alq3
von: G. Baldacchini, et al.
Veröffentlicht: (2012)

Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading
von: Czechowski, L., et al.
Veröffentlicht: (2013)

Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading
von: L. Czechowski, et al.
Veröffentlicht: (2013)

Thermal aging of stressed massive rubber elements in mining machines
von: A. A. Loginova, et al.
Veröffentlicht: (2016)

Prediction of residual stresses after welding of duplex steel taking into account phase transformations
von: O. S. Kostenevych, et al.
Veröffentlicht: (2021)

Computer modeling of thermal processes in single-phase transformer considering anisotropic thermal properties of active elements
von: I. N. Kucherjavaja
Veröffentlicht: (2014)

Stress-strain state monitoring of the load-bearing elements of ship structures
von: O. P. Zavalniuk, et al.
Veröffentlicht: (2013)

Computer modeling of deformation of the elements of operating power equipment elements with damages
von: B. D. Drobenko
Veröffentlicht: (2010)

Stress State and Strength of Thin-Wall Constructions under Nonisothermic Repeated Loading
von: M. O. Babeshko, et al.
Veröffentlicht: (2022)

Brittle-ductil transition of titanium aluminides, alloyed by β-phase stabilization elements
von: M. V. Remez, et al.
Veröffentlicht: (2020)

The Study of Amorphous Chalcogenide Materials of Memory Elements Based on Phase Transitions
von: Kyrylenko, V. K., et al.
Veröffentlicht: (2014)

Phase transitions in the Mitsui model
von: Dublenych, Yu.I.
Veröffentlicht: (2011)

The Theoretical and Practical Foundations for Building a System of Customs Services for Enterprises in the Context of European Integration
von: Ye. Kuzmin, et al.
Veröffentlicht: (2017)

Fracture Resistance of Residually-Stressed Ceramic Laminated Structures
von: Gogotsi, G.A., et al.
Veröffentlicht: (2004)

Mathematical modeling and polarimetry of the thermal stress state in semitransparent solid taking into account the influence of thermal radiation
von: O. R. Hachkevych, et al.
Veröffentlicht: (2020)

Axisymmetric thermal stresses in a radially-inhomogeneous cylinder subjected to piecewise-variable temperature at the lateral surface
von: Yu. V. Tokovyi, et al.
Veröffentlicht: (2017)

Qualitative assessment of residual stresses by the method of magnetic structuroscopy
von: A. A. Smolina, et al.
Veröffentlicht: (2010)

Residual stresses accounting in titanium alloys surface strengthening
von: Павленко, В. Н.
Veröffentlicht: (2016)

Residual stresses accounting in titanium alloys surface strengthening
von: Павленко, В. Н.
Veröffentlicht: (2016)