IT-Tools to Optimize the Process of Conductive Drying of Polygraphic Materials
Збережено в:
| Дата: | 2017 |
|---|---|
| Автори: | Ya. Yu. Koliano, T. S. Sass, Ye. H. Ivanyk, O. V. Sikora, M. V. Doroshenko |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2017
|
| Назва видання: | Mathematical and computer modelling. Series: Technical sciences |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000862561 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Simulation of the Process of Heat and mass Transfer in Composite Polygraph Structures
за авторством: Ya. Yu. Koliano, та інші
Опубліковано: (2018)
за авторством: Ya. Yu. Koliano, та інші
Опубліковано: (2018)
Mathematical and structural model information technology improvement of drying Printing materials
за авторством: Ya. Yu. Koliano, та інші
Опубліковано: (2016)
за авторством: Ya. Yu. Koliano, та інші
Опубліковано: (2016)
Newspaper headline: correspondence of polygraphic standards
за авторством: M. Ripei
Опубліковано: (2009)
за авторством: M. Ripei
Опубліковано: (2009)
Semantic derivation in terminological system of the public-polygraphic branch
за авторством: Yu. O. Vozniuk
Опубліковано: (2019)
за авторством: Yu. O. Vozniuk
Опубліковано: (2019)
Reliability control and endurance of friction units of polygraphic machines
за авторством: T. A. Roik, та інші
Опубліковано: (2011)
за авторством: T. A. Roik, та інші
Опубліковано: (2011)
Problems and Priorities of Corporate Management by Economic Security of Enterprises of Publishing-Polygraphic Industry of Ukraine
за авторством: Ye. M. Palyha, та інші
Опубліковано: (2009)
за авторством: Ye. M. Palyha, та інші
Опубліковано: (2009)
The "Polygraph Sharikov” concept: problematic issues of updating the civil legislation of Ukraine
за авторством: V. O. Koverznev
Опубліковано: (2021)
за авторством: V. O. Koverznev
Опубліковано: (2021)
Modeling of heat and mass transfer in the process of drying of colloid capillary - porous materials
за авторством: Zh. O. Petrova, та інші
Опубліковано: (2019)
за авторством: Zh. O. Petrova, та інші
Опубліковано: (2019)
Dry ice is the useful material in welding
за авторством: S. N. Zhiznjakov
Опубліковано: (2014)
за авторством: S. N. Zhiznjakov
Опубліковано: (2014)
Kinetics of the Drying Process of Composite Biopellets on a Convective Drying Bench
за авторством: Петрова, Ж. О., та інші
Опубліковано: (2026)
за авторством: Петрова, Ж. О., та інші
Опубліковано: (2026)
Kinetics of the Drying Process of Composite Biopellets on a Convective Drying Bench
за авторством: Петрова, Ж. О., та інші
Опубліковано: (2026)
за авторством: Петрова, Ж. О., та інші
Опубліковано: (2026)
Fundamental approaches in mathematical modeling of drying processes of capillary-porous and dispersed materials
за авторством: B. Haivas
Опубліковано: (2017)
за авторством: B. Haivas
Опубліковано: (2017)
Forecast Evaluation of Efficiency of Increasing of Welding Protection of Elements of Welded Constructions by Thermal Properties
за авторством: O. V. Sikora, та інші
Опубліковано: (2018)
за авторством: O. V. Sikora, та інші
Опубліковано: (2018)
Investigation of the drying process of gypsum molds
за авторством: I. A. Grimzin, та інші
Опубліковано: (2017)
за авторством: I. A. Grimzin, та інші
Опубліковано: (2017)
Effective coefficient of thermal conductivity of biofuel in the conditions of high-temperature drying
за авторством: D. M. Korinchuk
Опубліковано: (2018)
за авторством: D. M. Korinchuk
Опубліковано: (2018)
Energy-Consumption and Environmental Aspects of Drying Processes
за авторством: Yu. F. Sniezhkin, та інші
Опубліковано: (2023)
за авторством: Yu. F. Sniezhkin, та інші
Опубліковано: (2023)
Polygraphic institutions of Lviv in the context of Ukrainian music publishing XIX — first third of the XX century
за авторством: O. Osadtsia
Опубліковано: (2017)
за авторством: O. Osadtsia
Опубліковано: (2017)
Energy saving technologies for drying of heat-sensitive materials
за авторством: Yu. F. Sniezhkin, та інші
Опубліковано: (2019)
за авторством: Yu. F. Sniezhkin, та інші
Опубліковано: (2019)
The study of dry grinding of steel cams using cubic boron nirtride tools
за авторством: V. K. Starkov, та інші
Опубліковано: (2014)
за авторством: V. K. Starkov, та інші
Опубліковано: (2014)
Cyclic microwave drying dense layer of grain materials
за авторством: I. L. Boshkova, та інші
Опубліковано: (2016)
за авторством: I. L. Boshkova, та інші
Опубліковано: (2016)
Construction of the solution of the thermal-convective drying problem for porous solids in drying plants
за авторством: Ye. Ya. Chaplya, та інші
Опубліковано: (2015)
за авторством: Ye. Ya. Chaplya, та інші
Опубліковано: (2015)
Kinetics of the Process of Drying the Paste of Titanium Dioxide in an Original Drying Vortex Apparatus and Obtaining a Fine Powder TiO2
за авторством: V. M. Marchevskyi, та інші
Опубліковано: (2018)
за авторством: V. M. Marchevskyi, та інші
Опубліковано: (2018)
Thermomoelectric material processing tools and their comparative analysis
за авторством: S. F. Zaparov
Опубліковано: (2014)
за авторством: S. F. Zaparov
Опубліковано: (2014)
The pouring out of dry sand from molds without dust
за авторством: V. S. Doroshenko
Опубліковано: (2011)
за авторством: V. S. Doroshenko
Опубліковано: (2011)
Mathematical processing of results experimental studies of low-temperature modes of drying of capillary-porous materials of spherical shape
за авторством: Yu. F. Sniezhkin, та інші
Опубліковано: (2019)
за авторством: Yu. F. Sniezhkin, та інші
Опубліковано: (2019)
Stressed state and stability of porous bodies form in the drying process
за авторством: B. Hayvas, та інші
Опубліковано: (2013)
за авторством: B. Hayvas, та інші
Опубліковано: (2013)
Modeling of internal diffusion mass transfer during filtration drying of capillary-porous material
за авторством: Ya. Gnativ, та інші
Опубліковано: (2020)
за авторством: Ya. Gnativ, та інші
Опубліковано: (2020)
With Ukraine in the heart. Review of the book: Tamara Lonnhren, Natalia Khobzei (eds.). Slavonic world of Olaf Broch: Collection book based on the materials of the materials of the reports presented during the seminars devoted to 150 years from the day of
за авторством: H. Sikora
Опубліковано: (2018)
за авторством: H. Sikora
Опубліковано: (2018)
Energy-efficient modes of drying of colloidal capillary-porous materials
за авторством: Zh. O. Petrova
Опубліковано: (2018)
за авторством: Zh. O. Petrova
Опубліковано: (2018)
Reduction of thermoelectric material lattice thermal conductivity using shape-forming element optimization
за авторством: P. V. Gorsky, та інші
Опубліковано: (2013)
за авторством: P. V. Gorsky, та інші
Опубліковано: (2013)
Convective-thermal grain drying
за авторством: B. Haivas, та інші
Опубліковано: (2015)
за авторством: B. Haivas, та інші
Опубліковано: (2015)
Heat pump technologies of low temperature drying of capillary-porous materials spherical shape
за авторством: Yu. F. Sniezhkin, та інші
Опубліковано: (2020)
за авторством: Yu. F. Sniezhkin, та інші
Опубліковано: (2020)
Casting in shell moulds which are got an impregnation binder dry sand
за авторством: V. S. Doroshenko, та інші
Опубліковано: (2009)
за авторством: V. S. Doroshenko, та інші
Опубліковано: (2009)
The Investigation of Random Characters of Quicksand Materials Drying Process in "Boiling Layer" by Method of Computer Experiment
за авторством: V. N. Pavlysh, та інші
Опубліковано: (2014)
за авторством: V. N. Pavlysh, та інші
Опубліковано: (2014)
The method of accelerated testing of solar drying moisture contain mediums processes
за авторством: Kuchinsky, V., та інші
Опубліковано: (2017)
за авторством: Kuchinsky, V., та інші
Опубліковано: (2017)
The method of accelerated testing of solar drying moisture contain mediums processes
за авторством: V. P. Kuchynskyi, та інші
Опубліковано: (2017)
за авторством: V. P. Kuchynskyi, та інші
Опубліковано: (2017)
Numerical Study of Desulphurization Process by the Ammonium Semi-Dry Method
за авторством: I. A. Volchyn, та інші
Опубліковано: (2015)
за авторством: I. A. Volchyn, та інші
Опубліковано: (2015)
Optimization of parallel perceptron for central processing units
за авторством: Doroshenko, A.Yu., та інші
Опубліковано: (2025)
за авторством: Doroshenko, A.Yu., та інші
Опубліковано: (2025)
Convective drying of granular material with taking into account two-layered structure of an individual grain 69-80
за авторством: B. Haivas, та інші
Опубліковано: (2014)
за авторством: B. Haivas, та інші
Опубліковано: (2014)
Investigation of low-temperature drying modes plant capillary-porous materials spherical shape
за авторством: V. M. Paziuk
Опубліковано: (2018)
за авторством: V. M. Paziuk
Опубліковано: (2018)
Схожі ресурси
-
Simulation of the Process of Heat and mass Transfer in Composite Polygraph Structures
за авторством: Ya. Yu. Koliano, та інші
Опубліковано: (2018) -
Mathematical and structural model information technology improvement of drying Printing materials
за авторством: Ya. Yu. Koliano, та інші
Опубліковано: (2016) -
Newspaper headline: correspondence of polygraphic standards
за авторством: M. Ripei
Опубліковано: (2009) -
Semantic derivation in terminological system of the public-polygraphic branch
за авторством: Yu. O. Vozniuk
Опубліковано: (2019) -
Reliability control and endurance of friction units of polygraphic machines
за авторством: T. A. Roik, та інші
Опубліковано: (2011)