Buchumschlag

Investigation of the processes of wear-resistant surface alloying

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	A. G. Kovalchuk, M. M. Jamshinskij, G. E. Fedorov
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Metal and casting of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000991602
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Physical-chemical processes in castings with wear-resistant surface alloying
von: A. G. Kovalchuk, et al.
Veröffentlicht: (2018)

The optimization of chemical composition of the wear resistant high alloyed white cast irons
von: K. S. Radchenko, et al.
Veröffentlicht: (2011)

Improvement of technological processes of surface alloying of work pieces in a casting form
von: A. G. Kovalchuk, et al.
Veröffentlicht: (2017)

Investigation of formation of structure of wear-resistant alloy in surfacing using powder strip PL-AN-111
von: B. V. Efremenko, et al.
Veröffentlicht: (2017)

Investigation of wear resistance of composite alloys under the conditions of gas-abrasive wear at elevated temperatures
von: A. P. Zhudra
Veröffentlicht: (2014)

The wear resistance of titanium alloys
von: O. M. Solovar, et al.
Veröffentlicht: (2016)

Optimization of annealing wear resistant chromium-manganese cast irons for improve their machinability
von: K. S. Radchenko, et al.
Veröffentlicht: (2015)

Modification of aluminum and titanium alloys surface for increasing their wear resistance and tribological characteristics
von: M. M. Student, et al.
Veröffentlicht: (2021)

Wear-resistant arc surfacing over a layer of alloying charge
von: V. V. Peremitko
Veröffentlicht: (2014)

Electric arc surfacing of wear-resistant iron- and nickel-based alloys on copper
von: I. O. Riabtsev, et al.
Veröffentlicht: (2022)

Influence of Titanium on Formation of Wear-Resistant Alloy
von: A. Y. Liubych, et al.
Veröffentlicht: (2013)

Investigation of surface resistance OF Al, Be AND Al-Be alloy at low temperatures
von: Azhazha, V.M., et al.
Veröffentlicht: (2000)

Investigation of wear-resistant protective coatings under conditions of hydro-abrasive wear
von: B. V. Stefaniv
Veröffentlicht: (2016)

Strengthening technologies for the formation of wear-resistant surface layers
von: V. V. Tikhonenko, et al.
Veröffentlicht: (2011)

The influence of oxidation on wear resistance of BH-10 alloy
von: N. B. Ratska, et al.
Veröffentlicht: (2012)

The influence of oxynitriding on wear-resistance of VT14 titanium alloy
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2010)

Wear resistance and structural modification of the surface layer of high-chromium martensitic alloys under abrasive action and sliding friction
von: N. B. Efros, et al.
Veröffentlicht: (2014)

Formation of wear resistant structures in steels at discrete changes of their surfaces
von: M. V. Kindrachuk, et al.
Veröffentlicht: (2009)

Wear-resistant surfacing with feeding of nanooxides to weld pool
von: V. D. Kuznetsov
Veröffentlicht: (2015)

Wear Resistance of Cobalt—Carbide Eutectic Alloy under Conditions of Gas-Dynamic Loading
von: G. P. Dmitrieva, et al.
Veröffentlicht: (2013)

Influence of laser alloying modes to the wear resistance parameters of 12H18N10T steel surface layer
von: Z. A. Duriahina, et al.
Veröffentlicht: (2013)

Increase of wear resistance of titanium using argon arc surfacing
von: V. P. Prilutskij, et al.
Veröffentlicht: (2012)

Structure and Properties of a Wear-Resistant Alloy Based on a Cobalt with Niobium Carbide
von: G. P. Dmitrieva, et al.
Veröffentlicht: (2015)

Automated control system of technological process of applying wear-resistant coatings by ion-plasma method
von: V. M. Tonkonogij, et al.
Veröffentlicht: (2020)

Flux-cored wire for wear-resistant surfacing of thin-sheet structures
von: A. A. Babinets, et al.
Veröffentlicht: (2017)

Application of Fe–P–B alloys in developing wear-resistant composite materials
von: I. M. Spyrydonova, et al.
Veröffentlicht: (2013)

Adhesion-active high-temperature wear-resistant surfacing concumables KMKh and KMKhS
von: A. M. Kostin, et al.
Veröffentlicht: (2017)

Effect of concentration of hard particles on gas-abrasive wear resistance of composite alloys
von: A. P. Voronchuk
Veröffentlicht: (2009)

Wear-resistance of titanium alloy VT22 after nitriding combined with thermal treatment
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2016)

Increase of medium-carbon steel wear resistance by nanodispersion of surface layer
von: V. I. Kyryliv
Veröffentlicht: (2012)

Structure and properties of the wear-resistant facing modified by electron-beam processing
von: V. E. Kormyshev, et al.
Veröffentlicht: (2017)

Abrasive wear resistance of alloyed electric arc sprayed coatings from powder wires
von: V. M. Hvozdetskyi
Veröffentlicht: (2018)

The influence of the laser alloying conditions on the parameters of wear resistance of 12Kh17T steel
von: Z. A. Duriahina, et al.
Veröffentlicht: (2011)

The investigation of friction and wear characteristics of ion-plasma coatings, received on the aluminum alloy
von: C. F. Dudnik, et al.
Veröffentlicht: (2004)

Problems and prospects of surfacing copper and copper parts by wear-resistant layers (Review)
von: A. A. Babinets, et al.
Veröffentlicht: (2020)

Current functional materials for wear-resistant casting: from multicomponent cast irons to hybrid high-boron alloys
von: Yu. G. Chabak, et al.
Veröffentlicht: (2022)

Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
von: M. I. Pashechko
Veröffentlicht: (2010)

Investigation of wear-resistance of high-nitrogen steels under dry sliding friction conditions
von: O. I. Balytskyi, et al.
Veröffentlicht: (2012)

Influence of a chromium carbide content on wear-resistance of the Fe-Cr-C system alloys
von: A. A. Mikhajlov, et al.
Veröffentlicht: (2010)

Structure and wear resistance at abrasive wear of deposited material, hardened with carbides of different types
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2015)