Cover Image

Direct thermal method of rheocasting for alloys on zn and Cu base

Saved in:

Bibliographic Details
Date:	2017
Main Authors:	A. G. Borisov, Ju. Shejgam, V. M. Duka, T. G. Tsir, A. G. Vernidub
Format:	Article
Language:	English
Published:	2017
Series:	Casting processes
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001038187
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Influence of thermal parameters of the direct thermal method rheocasting on the formation and properties of unprofitable castings of alloy AK7
by: A. G. Borisov, et al.
Published: (2015)

Centrifugal rheocasting technology of aluminium alloys
by: A. I. Semenchenko, et al.
Published: (2015)

Perspective methods of rheocasting for low-tonnage production
by: A. G. Borisov
Published: (2018)

Efficiency of a rapidly cooled ligature under direct thermal rheology
by: V. I. Belik, et al.
Published: (2018)

Environmentally Friendly Method to Finish Refining Aluminum Alloys
by: V. P. Golovachenko, et al.
Published: (2019)

Advantages of Casting Partially Crystallized Aluminum Alloys (Reocasting)
by: V. P. Golovachenko, et al.
Published: (2019)

The role of mixing factor in dynamic thermal methods
by: V. I. Belik, et al.
Published: (2018)

Effect of α-Phase morphology on physical-mechanical properties casts of aluminum alloy AK7ch
by: G. P. Borisov, et al.
Published: (2016)

Scandium effect on the properties and structure of alloys of Al-Zn-Mg-Cu system and their welded joints
by: V. E. Fedorchuk, et al.
Published: (2019)

Electrophysical properties of heterostructures CuS/ZnS and PCTFE–CuS/ZnS system
by: S. L. Prokopenko, et al.
Published: (2015)

Interaction of Cu, Zn, Mn and its alloys with refractory materials
by: D. S. Kanibolotskij, et al.
Published: (2015)

Heat protective properties of thermal coatings, containing quasi-crystalline alloy Al–Cu–Fe
by: A. L. Borisova, et al.
Published: (2012)

The investigation of possibility of Refining AK7 Alloy Grans by means of the creation by mixing the melts AK12 and A7
by: V. I. Belik, et al.
Published: (2017)

Електрофізичні властивості гетероструктури CuS/ZnS і системи CuS/ZnS-ПТФХЕ
by: Prokopenko, S. L., et al.
Published: (2015)

Structure and properties of alloyed powders based on Fe3Al intermetallic for thermal spraying produced using mechanochemical synthesis method
by: Ju. S. Borisov, et al.
Published: (2017)

Thermal spraying of pseudo-alloyed coatings (Review)
by: N. V. Vigiljanskaja, et al.
Published: (2012)

Influence of surface-active substances on phase formation in the process of producing powders of Al–Cu–Fe system for thermal coatings using method of mechanic chemical synthesis
by: A. N. Burlachenko, et al.
Published: (2012)

The influence of Temperature and rotary Treatment on hot-shortness of the high-strength aluminium alloy Val 10
by: V. P. Golovachenko, et al.
Published: (2014)

Laser treatment as an additional method to increase the tribotechnical properties of alloys based on cast irons alloyed with Cu and S
by: E. A. Markovskij, et al.
Published: (2017)

Coupled Effects of Strain Rate and Temperature on Deformation Twinning in Cu-Zn Alloy
by: Zhou, P., et al.
Published: (2016)

AE-diagnostics of fatigue fracture of aluminium Al–Zn–Mg–Cu alloys
by: V. R. Skalskyi, et al.
Published: (2015)

Study of Influence Dynamic Gating System on the Structure and Properties of Thick-Walled Castings of Aluminum Alloy AK7ch. Report 1
by: V. P. Golovachenko, et al.
Published: (2016)

The influence of microstructure of Al–Zn–Mg–Cu alloys on fracture mechanism of aircraft constructions
by: O. V. Abolikhina, et al.
Published: (2021)

Thermal analysis, phase and morphological transformations in the composites aluminosilicate nanotubes/acetates of Ni, Cu, Zn
by: O. I. Oranska, et al.
Published: (2014)

Thermal synthesis powder Fe-Mn-C-Cu master alloy
by: H. A. Bahliuk, et al.
Published: (2009)

Alloy Zr1Nb based on magnesium-thermal zirconium
by: Lavrinenko, S.D., et al.
Published: (2016)

Effectiveness of Reverse Mixture of Alloys in a Liguid State
by: Ju. Shejgam, et al.
Published: (2018)

Invesfigation of the effect of melt swing in the form on the alloy structure AK7Ch. Report 2
by: V. P. Golovachenko, et al.
Published: (2017)

Application of thermal spraying methods for manufacture of resistant coatings (Review)
by: Ju. S. Borisov, et al.
Published: (2018)

The influence of technological factors on the properties of high-strength aluminum alloy of the Al-Zn-Mg-Cu system
by: A. M. Verkhovliuk, et al.
Published: (2020)

Lattice thermal conductivity of thermoelectric materials based on Zn-Cd-Sb
by: P. V. Gorskiy
Published: (2016)

Electroluminescence powdered ZnS:Cu obtained by one-stage synthesis
by: Yu. Yu. Bacherikov, et al.
Published: (2015)

The effect of tin fillers on structure and technological properties of brazing alloys of Ag-Cu-Zn system
by: V. F. Khorunov, et al.
Published: (2010)

Electroluminescence powdered ZnS:Cu obtained by one-stage synthesis
by: Bacherikov, Yu.Yu., et al.
Published: (2015)

The Thixocasting of Aluminum Alloy AK7ch Using Billets with Different Initial Structure of Primary Phase
by: A. N. Neduzhij, et al.
Published: (2019)

Structural investigations of annealed ZnS:Cu, Ga film phosphors
by: Lytvyn, O.S., et al.
Published: (2001)

Effect of nickel and manganese on structure of alloys of Ag–Cu–Zn–Sn system and strength of brazed joints
by: V. F. Khorunov, et al.
Published: (2014)

Analysis of the characteristics of the cooling of the metallic system casting – riser from aluminium alloy AK9M1
by: V. P. Golovachenko, et al.
Published: (2018)

Thermal Stability, Kinetics, and Mechanisms of Decomposition of Nanocomposite Structures in Alloys Based on Aluminium
by: S. G. Rassolov, et al.
Published: (2015)

Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
by: D. Xie, et al.
Published: (2018)