Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel

Saved in:

Bibliographic Details
Date:	2017
Main Author:	N. E. Stakhniv
Format:	Article
Language:	English
Published:	2017
Series:	Tooling materials science
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001084179
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
by: N. E. Stakhniv, et al.
Published: (2016)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
by: N. E. Stakhniv
Published: (2013)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
by: L. N. Devin, et al.
Published: (2012)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
by: N. E. Stakhniv, et al.
Published: (2012)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
by: Ye. Stakhniv, et al.
Published: (2022)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
by: S. A. Klimenko, et al.
Published: (2012)

The Fine Structure of the Surface Layer and Tribological Properties of QT 41Cr4 Steel Parts after Finish Turning Machining with Coated Cutters
by: M. Enek, et al.
Published: (2014)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
by: V. M. Bushlja, et al.
Published: (2014)

Investigation of cutting temperature in turning cutters with diamond-carbide plates
by: L. N. Devin, et al.
Published: (2018)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
by: L. M. Devin, et al.
Published: (2020)

Effect of damping properties of cutters on the probability of failure of the CBN plates
by: L. M. Devin, et al.
Published: (2016)

Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
by: S. A. Klimenko, et al.
Published: (2015)

Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts
by: Anshuman Das, et al.
Published: (2019)

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
by: N. E. Stakhniv, et al.
Published: (2019)

An increase of operating characteristics of cBN cutters by improving their damping properties
by: L. N. Devin, et al.
Published: (2012)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
by: V. K. Starkov, et al.
Published: (2014)

The phonomenon of material side flow during finish turning of EN X153CrMoV12 hardened steel with tools based on polycrystalline cubic boron nitride
by: Ociepa, M., et al.
Published: (2019)

The phonomenon of material side flow during finish turning of EN X153CrMoV12 hardened steel with tools based on polycrystalline cubic boron nitride
by: M. Ociepa, et al.
Published: (2019)

Modification of high speed steels by nanostructured materials for manufacture cutting inserts cutters of mining machines
by: L. V. Sudnik, et al.
Published: (2017)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: Chen, L., et al.
Published: (2017)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
by: L. Chen, et al.
Published: (2017)

Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
by: V. F. Khorunov, et al.
Published: (2012)

Study of the influence of phase composition of cutting inserts made of diamond–tungsten carbide nanocomposite on the process of finish turning of aluminum alloys and brass
by: N. E. Stakhniv, et al.
Published: (2018)

Ensuring fatigue life of parts during finish turning with cubic boron nitride tools
by: K. S. Barandych, et al.
Published: (2018)

Structure and wear resistance at abrasive wear of deposited material, hardened with carbides of different types
by: I. A. Rjabtsev, et al.
Published: (2015)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
by: Osipov, A.S., et al.
Published: (2016)

Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
by: Hlushkova, D.B., et al.
Published: (2023)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
by: K. O. Diadiura, et al.
Published: (2015)

The influence of VC–Al additive on wear resistance of cBN-based composites
by: K. V. Slipchenko, et al.
Published: (2018)

Comparative analysis of performance of cubic boron nitride and microcrystalline alumina tools in profile grinding of form cutters
by: V. K. Starkov, et al.
Published: (2014)

The problems of elaboration of methods of a finish machining application by intensive thermal fluxes
by: Планковский, С. И., et al.
Published: (2016)

The problems of elaboration of methods of a finish machining application by intensive thermal fluxes
by: Планковский, С. И., et al.
Published: (2016)

The problems of elaboration of methods of a finish machining application by intensive thermal fluxes
by: S. I. Plankovskij, et al.
Published: (2011)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
by: T. Zhao, et al.
Published: (2017)

The structural characteristics and the conductivity of the epoxy-inorganic polymers, obtained due to hardening by heteropolyacids
by: O. K. Matkovska, et al.
Published: (2012)

Deformation of the plasma concentration profile due to the modulated electron beam
by: Anisimov, I.O., et al.
Published: (2002)

Electron emission modulation effects in micro-size structures
by: Hartnagel, H.
Published: (2003)

Development of hardening process of a wear-resistant carbide-titanium coating received on steel by an electrophoresis and ensure adhesion of the coating with the substrate
by: G. A. Bagljuk, et al.
Published: (2014)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
by: L. N. Devin, et al.
Published: (2018)