Buchumschlag

Comparison of results of the determination of the stresses on the cutting edges from diamond monocrystals by analytic 2-D and 3-D by the finite element method

Gespeichert in:

Bibliographische Detailangaben
Datum:	2017
Hauptverfasser:	L. N. Devin, S. V. Rychev, A. V. Smerchinskij
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2017
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001084180
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The effect of titanium and tungsten coating the surface of diamond monocrystals on the wear resistance of rock-cutting elements made from them
von: O. O. Bochechka, et al.
Veröffentlicht: (2019)

Investigation of cutting temperature in turning cutters with diamond-carbide plates
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Mechanical processing of diamond monocrystals by diamond microprouts with coating
von: A. V. Nozhkina, et al.
Veröffentlicht: (2018)

Reinforcement of rock cutting tool by large synthetic monocrystal
von: M. S. Popova
Veröffentlicht: (2019)

Continuum modeling the elastic behavior of nanosized diamond monocrystals
von: V. I. Kushch
Veröffentlicht: (2023)

Analysis of cutting edge wear during drilling composite materials
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Cutting section parametrs for oblique fine turning with a radius tool
von: L. M. Devin, et al.
Veröffentlicht: (2019)

The correlation model of acoustic emission in fine diamond turning
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Study of the influence of phase composition of cutting inserts made of diamond–tungsten carbide nanocomposite on the process of finish turning of aluminum alloys and brass
von: N. E. Stakhniv, et al.
Veröffentlicht: (2018)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Plasma hardening of cutting edges of soil-cultivating tool
von: S. S. Samotugin, et al.
Veröffentlicht: (2009)

Cutting-edge industrial technology of mining tool manufacturing
von: Savchenko, Iu., et al.
Veröffentlicht: (2016)

Object Model of Finite Element in Nadra-3d Solver
von: M. V. Bilous
Veröffentlicht: (2017)

Innovative Appeal of the Structurally Perfect Diamond Monocrystal Production to their Purposeful Use in the Newest Technologies of the XXI Century
von: M. V. Novikov, et al.
Veröffentlicht: (2015)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
von: L. N. Devin, et al.
Veröffentlicht: (2019)

Software complex for automation of finite-element discretization of 2-D domains
von: Ya. Sokolovskyi, et al.
Veröffentlicht: (2014)

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
von: N. E. Stakhniv, et al.
Veröffentlicht: (2019)

The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
von: A. M. Kuzej, et al.
Veröffentlicht: (2019)

Magnetic nano-ordering in polycrystal and monocrystal chromium
von: Rozouvan, T., et al.
Veröffentlicht: (2014)

Investigation of acoustic emission signal on the stage of penetretion and exit when drilling carbon plastics by using drills from diamond-carbide plates (PCD)
von: L. M. Devin, et al.
Veröffentlicht: (2022)

An evaluating and detecting system of diamond saw blades cutting performance
von: Hu Yule, et al.
Veröffentlicht: (2010)

Fracture and Fatigue Analysis for a Cracked Carabiner Using 3D Finite Element Simulations
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)

The investigation of the deformations of the elastic bodies with thin coating using D-adaptive finite element model
von: O. Kossak, et al.
Veröffentlicht: (2010)

Semi-analytical finite element method for deflected mode of ribbed cylindrical shells
von: Аврамов, К. В., et al.
Veröffentlicht: (2014)

Semi-analytical finite element method for deflected mode of ribbed cylindrical shells
von: K. V. Avramov, et al.
Veröffentlicht: (2014)

Semi-analytical finite element method for deflected mode of ribbed cylindrical shells
von: Аврамов, К. В., et al.
Veröffentlicht: (2014)

On Semi-Analytical Finite Element Method in Dynamical Problems of Linear Fracture Mechanics
von: V. A. Bazhenov, et al.
Veröffentlicht: (2018)

Influence of macrostructure of diamond-containing composite materials on cutting capacity of the tool
von: A. M. Kuzej, et al.
Veröffentlicht: (2018)

Analytical determination of the number of grains in a carat of diamond powder using an extrapolation–affine 3D model of a grain
von: G. A. Petasjuk, et al.
Veröffentlicht: (2012)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
von: T. Zhao, et al.
Veröffentlicht: (2017)

Diamonds of Ukraine: Results and Goals
von: V. M. Kvasnytsia
Veröffentlicht: (2021)

The influence of the counterbody base edges curvature on stress intensity factors in a body with an edge crack
von: O. P. Datsyshyn, et al.
Veröffentlicht: (2014)

Finite Element Analysis of Hyperelastoplastic Mixed-hardening Materials under Plane Stresses
von: J. P. Pascon
Veröffentlicht: (2024)

Study of the stress-strain state of ribbed cylindrical shells by the finite elements method
von: Menabdishvili, P.Z, et al.
Veröffentlicht: (1985)

Analytical Solution of the Problem of Symmetric Thermally Stressed State of Thick Plates Based on the 3D Elasticity Theory
von: Ревенко, В. П.
Veröffentlicht: (2021)

Analytical Solution of the Problem of Symmetric Thermally Stressed State of Thick Plates Based on the 3D Elasticity Theory
von: Ревенко, В. П.
Veröffentlicht: (2021)

Analytical Solution of the Problem of Symmetric Thermally Stressed State of Thick Plates Based on the 3D Elasticity Theory
von: V. P. Revenko
Veröffentlicht: (2021)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

Regional development and R&amp;D activity: international comparison
von: D. Ilnytskyy
Veröffentlicht: (2015)