Cover Image

On Modeling the Creep Processes in Polymers with Allowance for Their Aging

Saved in:

Bibliographic Details
Date:	2016
Main Authors:	N. V. Olali, L. V. Vojtovich, N. M. Zazimko, M. P. Malezhik
Format:	Article
Language:	English
Published:	2016
Series:	International Applied Mechanics
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000503654
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Constitutive Modeling for Al–Cu–Mg Alloy in Creep Aging Process
by: Yang, Y.L., et al.
Published: (2016)

On Photoelastic Modeling of Problems of Mechanics of Oprthotropic Bodies
by: M. P. Malezhik, et al.
Published: (2014)

Integral models of development of electric power systems with allowance for ageing of equipment of electric power plants
by: A. S. Apartsin, et al.
Published: (2014)

Integrodifferential criterion of the strength of aging polymers
by: Buryachenko, V.A., et al.
Published: (1985)

Modeling of Impact of Rigid Bodies with Allowance for Friction
by: A. G. Zabuga
Published: (2016)

Investigation of creep and creep-damage of the hollow cylinder based on the spatial and refined shell models
by: O. Z. Halishyn, et al.
Published: (2016)

Allowance for the construction of windings of asynchronous machine in Matlab modeling
by: O. A. Zakharzhevskij, et al.
Published: (2014)

Modelling of thermal processes in laser welding of polymers
by: M. H. Korab, et al.
Published: (2021)

Analytical models of austenite transformation in steel with allowance for internal stresses
by: S. V. Bobyr
Published: (2018)

On Allowance for the Third Invariant of Stress Deviator in Analysis of Processes of Deformation of Thin Shells
by: M. E. Babeshko, et al.
Published: (2018)

Calculation of the stress-strain state, creep and creep-damage of multilayer plates on the elastic foundation
by: V. A. Bogomolov, et al.
Published: (2014)

To Analysis of Processes of Non-Isothermal Loading the Shells of Revolution with Allowance for the Repeated Plastic Strains
by: M. E. Babeshko, et al.
Published: (2017)

On Creep and Damageability of Shallow Shells
by: S. N. Sklepus
Published: (2018)

CONTACT POTENTIAL DIFFERENCE AS A MEASURE OF POWER CABLE POLYMER INSULATION AGING
by: Bezprozvannych, G. V., et al.
Published: (2014)

On Different Variants of Allowance for Loosening of Isotropic Materials
by: M. O. Babeshko, et al.
Published: (2022)

Prediction of the stress-rupture strength and modelling of the creep processes of high-temperature creep-resistant materials (according to the materials of scientific report at the meeting of the Presidium of NAS of Ukraine, December 21, 2016)
by: R. P. Prykhodko
Published: (2017)

Technique for Numerical Study of Processes of Thermoviscoelastoplastic Deformation of Layered Shells with Allowance for the Third Invariant of Stress Deviator
by: M. E. Babeshko, et al.
Published: (2014)

Stabilization of Motion of TORA Model with Allowance for Nonlinearity of Its Elastic Elements
by: A. S. Khoroshun
Published: (2023)

On the Nonlinear Theory of Magnetoelasticity of Shells of Revolution with Allowance for the Joule Heat
by: L. V. Molchenko, et al.
Published: (2018)

Maximum allowed concentration (MAC) of the synthetic industrial detergent &quot;Akumer” (acrylic acid polymer) justification for fishery water bodies use
by: O. V. Tretiakova
Published: (2015)

Economic variables allowing forecasting the development of the potential of the region
by: V. M. Hryniv
Published: (2024)

Methods for evaluating the performance of banks allowing for risk
by: V. V. Chaplyha
Published: (2013)

Mathematical modeling an unsteady process of motion two non-mixing liquids in porous medium with allowance for anisotropy of stratum permeability
by: R. A. Mustafaev
Published: (2014)

Modeling of creep crack growth in lamellate components using the continuum damage parameters
by: N. G. Shulzhenko, et al.
Published: (2012)

Equation of state of a cell fluid model with allowance for Gaussian fluctuations of the order parameter
by: I. V. Pylyuk, et al.
Published: (2020)

Equation of state of a cell fluid model with allowance for Gaussian fluctuations of the order parameter
by: I. V. Pylyuk, et al.
Published: (2020)

Ultrasound influence on the creep nanostructured Zr
by: Sokolenko, V.I., et al.
Published: (2016)

Micromechanisms and calculation model of low-temperature creep crack growth in materials
by: Ye. Andreikiv, et al.
Published: (2013)

Techniques of desing definition of characteristics of creep at the first and second stage by results of relaxation tests with use of the restricted number isochrones curves of creep
by: L. B. Getsov, et al.
Published: (2010)

Determination of grinding conditions for renewal of a wheel cutting ability allowing for its variation during the machining process
by: P. G. Matjukha, et al.
Published: (2017)

Influence of the chemical nature of matrix polymer on the features of flowing and structure formation processes in polymer mixture melts
by: N. M. Rezanova, et al.
Published: (2015)

Optimization of diamond grinding conditions for steel R6M5F3 allowing for the process unsteadiness
by: V. V. Poltavets, et al.
Published: (2013)

The increase of AMg6M alloy durability due to energy processing in the creep conditions
by: V. P. Poshyvalov, et al.
Published: (2013)

To the Rheological Model of a Soil Layer: Determination of the Model Parameters from a Test on the Creep of Layer
by: O. V. Kendzera, et al.
Published: (2023)

Calculation of the stress-strain state, creep and creep-damage of multilayer plates on the elastic foundation
by: Богомолов, В. А., et al.
Published: (2014)

Calculation of the stress-strain state, creep and creep-damage of multilayer plates on the elastic foundation
by: Богомолов, В. А., et al.
Published: (2014)

Solution of the axisymmetric creep and creep damage problem for a piecewise-homogeneous body with arbitrary shape of meridional section
by: S. M. Sklepus
Published: (2013)

Allowable deviation of LC layer thickness in cholesteric LCDs
by: Rybalochka, A., et al.
Published: (2002)

Allowable internal pressure in the hollow combined cylindrical castings
by: V. F. Mazorchuk, et al.
Published: (2017)

Retraction: N. V. Olali, D. B. Vengrovich, M. P. Malezhyk “Mathematical modeling of the elastic behavior of structured geophysical media” published in “Geophysical Journal” Vol. 39, No. 5, 2017
by: Olali, N. V., et al.
Published: (2018)