Buchumschlag

Modeling of residual welding stresses, radiation swelling and stressed state of enclosure of the reactor VVER-1000 in the process of operation

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	O. V. Makhnenko, I. V. Mirzov, V. B. Porokhonko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2016
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000506843
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Redistribution of residual welding stresses inside the inner-body shaft of the reactor WWER-1000 in the process of service
von: O. V. Makhnenko, et al.
Veröffentlicht: (2014)

Evaluation of brittle fracture resistance of WWER-1000 reactor enclosure during long-term service, taking into account the residual technological stresses
von: O. V. Makhnenko, et al.
Veröffentlicht: (2022)

Modeling of residual stresses in the area of technological welds of PWR-1000 reactor shells
von: O. V. Makhnenko, et al.
Veröffentlicht: (2018)

Method of Parametric Assignment of Input Data for Irradiation Swelling Calculation of VVER-1000 Internals
von: I. V. Mirzov, et al.
Veröffentlicht: (2016)

Improving the methods for estimating radiation swelling and progressive dimensional changes of the elements of VVER¬1000 internals
von: O. V. Makhnenko, et al.
Veröffentlicht: (2019)

Mathematical modeling of residual stresses in composite welded joints of WWER-1000 reactor vessel cover with CPS nozzles
von: A. A. Makarenko, et al.
Veröffentlicht: (2022)

Influence of residual process stresses on brittle fracture resistance of WWER-1000 reactor baffle in case of an emergency
von: O. V. Makhnenko, et al.
Veröffentlicht: (2022)

Impact of technological parameters of arc deposition of an anti-corrosion layer in the vessel of WWER-1000 reactor on residual stress distribution
von: O. V. Makhnenko, et al.
Veröffentlicht: (2020)

Mathematical simulation of microstructure phase transformations at welding heating by example corrosion resistant cladding of the reactor vessel VVER-1000
von: O. V. Makhnenko, et al.
Veröffentlicht: (2018)

Investigation of stress-strain state of welded structures of austenite steel under the conditions of radiation
von: O. V. Makhnenko, et al.
Veröffentlicht: (2013)

Mathematical modeling of residual stresses in WWER-1000 elements after heat treatment
von: O. V. Makhnenko, et al.
Veröffentlicht: (2021)

State and Prospects of Containment Tightness Tests for VVER-1000 Reactor Installations
von: V. P. Kravchenko, et al.
Veröffentlicht: (2023)

The method of control of nuclear power plant with VVER–1000 reactor in maneuverable mode
von: M. V. Maksimov, et al.
Veröffentlicht: (2015)

Empirical predicted residual life of the base metal of MCP of WWER-1000 reactors in operation
von: Gozhenko, S.V.
Veröffentlicht: (2023)

Lateral expansion and impact toughness correlation of VVER-1000 reactor pressure vessel materials
von: O. V. Tryhubenko
Veröffentlicht: (2014)

Influence of geometrical parameters of the VVER-1000 reactor construction elements to internals irradiation conditions
von: A. M. Pugach, et al.
Veröffentlicht: (2015)

Electrophysical Unsteady Processes in the System to Reduce Residual Stresses Welds
von: L. M. Lobanov, et al.
Veröffentlicht: (2016)

Sorting of surveillance specimen halves relative to their location in the VVER-1000 reactor under irradiation
von: Yu. S. Hulchuk, et al.
Veröffentlicht: (2019)

Methodological approaches to determining the forces acting on the VVER-1000 reactor support elements under power unit operating loads
von: B. O. Posokh
Veröffentlicht: (2020)

Mathematical model of determination of residual stresses and strains in friction stir welding of aluminium alloy
von: B. R. Tsaryk, et al.
Veröffentlicht: (2022)

Prediction of limiting amplitudes of cycle of stresses of welded joints with steady-state residual stresses
von: V. A. Degtjarev
Veröffentlicht: (2016)

Correctness of the radiation creep equations that involve the stress and accumulated irreversible deformation in the model of radiation swelling of an irradiated material
von: Yu. Chyrkov
Veröffentlicht: (2021)

Analysis of the correctness of problems in the mechanics of inelastic deformation with the influence of a stressed state on the processes of radiation swelling and radiation creep of the material .
von: Yu. Chyrkov
Veröffentlicht: (2021)

Comparative analysis of methodological approaches to the calculational determination of the forces acting on the VVER-1000 reactor support elements
von: V. O. Posokh, et al.
Veröffentlicht: (2020)

Welded structures of austenite steel of 10Kh18N10T type under conditions of radiation-induced swelling
von: V. I. Makhnenko, et al.
Veröffentlicht: (2012)

Inside welds: advanced characterization of residual stresses by neutron diffraction
von: M. Rogante
Veröffentlicht: (2020)

Radiation tests of products made of calcium-thermal zirconium grade STZ-110 under operation of the VVER-440 reactor
von: A. P. Mukhachev, et al.
Veröffentlicht: (2020)

Residual stress management in welding: measurement, fatigue analysis and improvement treatments
von: Yu. Kudryavtsev, et al.
Veröffentlicht: (2013)

Residual stress management in welding: measurement, fatigue analysis and improvement treatments
von: Kudryavtsev, Yu., et al.
Veröffentlicht: (2013)

Residual stress calculationin the weld region during welding of thick plates by the electron-beam method
von: V. P. Skalskyi, et al.
Veröffentlicht: (2012)

Fatigue resistance of steel welded joints of different strength with final residual stresses
von: V. A. Degtjarev
Veröffentlicht: (2018)

Mathematical modeling of residual stresses in a composite welded joint of the collector adapter sleeve to the branch pipe of ZPM-440 steam generator
von: A. A. Makarenko, et al.
Veröffentlicht: (2023)

Calculation of radiation fields in the VVER 1000 concrete biological shield using Monte Carlo code Serpent
von: O. M. Khotiaintseva, et al.
Veröffentlicht: (2023)

Residual structural stresses in glass bodies
von: S. F. Budz, et al.
Veröffentlicht: (2014)

Calculation of parameters of explosion treatment for reduction of residual stresses in circumferential welds of pipelines
von: A. G. Bryzgalin
Veröffentlicht: (2013)

Investigation and Characterization of Residual Stress on Prestressed Steel I-Beams Manufactured by Welding
von: A. Цzer, et al.
Veröffentlicht: (2015)

VVER‑1000 power monitoring based on neutron detector signals
von: V. I. Borysenko, et al.
Veröffentlicht: (2019)

Radiation creep effect on the form change determination of WWER-1000 reactor core baffle under longterm operation
von: Yu. Chyrkov, et al.
Veröffentlicht: (2021)

Influence of parameters of electrodynamic treatment on residual stresses of welded joints of AMG6 alloy
von: L. M. Lobanov, et al.
Veröffentlicht: (2019)

Engineering Margin in Calculations of Energy Release in VVER¬1000 Core
von: A. M. Abdullaev, et al.
Veröffentlicht: (2018)