Buchumschlag

Features of development of structural inhomogeneity in the fusion zone of pearlitic steel with austenitic nitrogen-containing weld metal

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	V. P. Elagin, V. N. Lipodaev, G. N. Gordan
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2016
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000606246
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Investigation of the methods of modifying the structure of austenitic welds and the zone of their fusion with pearlitic base metal
von: K. A. Yushchenko, et al.
Veröffentlicht: (2020)

Nitrogen alloying of weld metal in arc welding of corrosion-resistant steels (Review)
von: V. N. Lipodaev
Veröffentlicht: (2019)

Development of the theory of pearlite transformation in steel
von: V. V. Parusov, et al.
Veröffentlicht: (2013)

Peculiarities of laser welding of austenite and austenite-ferrite stainless steels with high manganese content
von: V. Kirots, et al.
Veröffentlicht: (2012)

Evaluation of the effect of pearlite dispersion on carbon steel fatigue
von: Kh. A. Askerov, et al.
Veröffentlicht: (2020)

On the possibility of forecasting mechanical properties of cold-deformed metal products from pearlite grade steel
von: E. V. Parusov, et al.
Veröffentlicht: (2021)

Heat-resistant pearlitic steels using an improved analysis method
von: V. V. Dmytryk, et al.
Veröffentlicht: (2022)

Microfractography of tensile tests surfaces of welded joints of austenitic and ferritic steels
von: B. Nasiłowska, et al.
Veröffentlicht: (2018)

Method of solid-state welding of austenitic and oxide dispersion strengthened steels
von: B. V. Borts, et al.
Veröffentlicht: (2017)

Crystal-geometrical features of the structure of cast and normalized steel with a ferrite-pearlite structure
von: Yu. Borysenko, et al.
Veröffentlicht: (2019)

Influence of welding wire composition on weld quality in welded joints of dissimilar steels in gas-shielded mechanized welding
von: V. P. Elagin
Veröffentlicht: (2017)

Development of corrosion inhibitors of ferrite-pearlite steels in environment of tione bacteria
von: M. S. Polutrenko, et al.
Veröffentlicht: (2019)

Improvement of structure and properties of cast ferrite-pearlite steels for transport machine building
von: Rabinovich, A.V., et al.
Veröffentlicht: (2008)

Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint
von: Guo, N., et al.
Veröffentlicht: (2015)

Welding of austenite stainless steel using high-power laser beam and electromagnetic control of weld pool
von: M. Bakhmann, et al.
Veröffentlicht: (2014)

Investigation of stress-strain state of welded structures of austenite steel under the conditions of radiation
von: O. V. Makhnenko, et al.
Veröffentlicht: (2013)

Dependence of corrosion behaviour of austenitic chromium-nickel steels on the paramagnetic state of austenite
von: H. V. Snizhnoi
Veröffentlicht: (2013)

Causes of crack formation in heat-affected zone of cast high-manganese steel in flash-butt welding
von: S. I. Kuchuk-Jatsenko, et al.
Veröffentlicht: (2010)

Combined technologies for fusion welding (Review)
von: G. I. Lashchenko
Veröffentlicht: (2012)

Evaluation of damage level in ferritic-pearlitic steels by the value of the change of longitudinal acoustic wave velocity
von: V. R. Skalskyi, et al.
Veröffentlicht: (2018)

Features of influence of the austenitizing temperature on the grain size chrome-molybdenum-vanadium steel
von: V. A. Lutsenko, et al.
Veröffentlicht: (2015)

Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)

Phase transformations of austenitic stainless modified steels
von: Ye. H. Aftandiliants
Veröffentlicht: (2019)

Thermomechanical strengthening of steels with low stability austenite
von: A. S. Opalchuk, et al.
Veröffentlicht: (2016)

The influence of titanium containing inoculates on structure of low-alloy high-strength steel weld metals
von: H. M. Hryhorenko, et al.
Veröffentlicht: (2020)

Influence of heat treatment on local fracture susceptibility of HAZ metal of titanium-stabilized austenitic steel
von: Ju. V. Poletaev
Veröffentlicht: (2012)

ESR of electrodes compacted of austenite stainless steel chips
von: V. A. Shapovalov, et al.
Veröffentlicht: (2011)

Grain size and correlation of strength, plasticity and toughness properties with coercive force of steels with ferrito-pearlitic structure
von: G. V. Bida
Veröffentlicht: (2010)

Structure transformation of the heat effected zone metal of welded joints of high-strength armor steels
von: V. A. Kostin, et al.
Veröffentlicht: (2019)

Formation of semiconducting nano-structures on the surface of austenite steel
von: S. V. Nesterenko, et al.
Veröffentlicht: (2007)

The stamping steel for hot deformation with controlled austenit transformation
von: K. O. Hohaiev, et al.
Veröffentlicht: (2014)

Formation of deformation martensite in the chromium-nickel austenitic steels
von: H. V. Snizhnoi
Veröffentlicht: (2011)

Effect of parameters of pulse-arc welding on the formation of weld metal and microstructure of heat-affected-zone of 09G2S steel
von: Yu. Maksymov, et al.
Veröffentlicht: (2022)

Structural inhomogeneity in welded joints of heat-resistant steels of chromium-molybdenum-vanadium
von: M. O. Nimko, et al.
Veröffentlicht: (2021)

Materials and technological approaches to welding of combined joints between martensitic and austenitic steels used in power machine building (Review)
von: M. O. Nimko, et al.
Veröffentlicht: (2023)

Welded structures of austenite steel of 10Kh18N10T type under conditions of radiation-induced swelling
von: V. I. Makhnenko, et al.
Veröffentlicht: (2012)

Evaluation of stability of fusion process in flash-butt welding
von: I. O. Skachkov, et al.
Veröffentlicht: (2011)

Influence of environmental conditions on microstructure development and swelling in irradiated austenitic stainless steels
von: Voyevodin, V.N., et al.
Veröffentlicht: (2005)

The influence of lead melt on embrittlement of ferritic and austenitic chromium steels
von: V. M. Fedirko, et al.
Veröffentlicht: (2019)

Analytical models of austenite transformation in steel with allowance for internal stresses
von: S. V. Bobyr
Veröffentlicht: (2018)