Cover Image

Modeling of chemical composition of pool metal in arc methods of welding

Saved in:

Bibliographic Details
Date:	2016
Main Authors:	V. V. Golovko, L. A. Taraborkin
Format:	Article
Language:	English
Published:	2016
Series:	Automatic Welding
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000606608
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Calculation model of formation of nonmetallic inclusions of multilayer morphology in weld metal
by: L. A. Taraborkin, et al.
Published: (2018)

Mathematical modeling of chemical composition of welding fumes in manual arc welding with high-alloyed electrodes
by: O. G. Levchenko, et al.
Published: (2017)

Calculated-experimental model of distribution of non-metallic inclusions in the metal of welds by sizes
by: L. A. Taraborkin, et al.
Published: (2021)

Influence of introduction of refractory particles to welding pool on structure and properties of weld metal
by: V. V. Holovko, et al.
Published: (2020)

The influence of introducing refractory compounds into the weld pool on the weld metal dendritic structure
by: V. V. Holovko, et al.
Published: (2020)

Methodology of determination of induction of controlled magnetic field in pool zone during arc welding
by: A. D. Razmyshljaev, et al.
Published: (2018)

Modeling of weld pool behavior in spot welding by pulsed laser emission
by: A. P. Semenov, et al.
Published: (2014)

Control of weld metal properties by adjustment of oxidation level of weld pool in shielded-gas welding
by: S. T. Rimskij
Published: (2011)

Effect of weld pool geometry on structure of weld metal of heat-resistant nickel alloy single crystals
by: K. A. Jushchenko, et al.
Published: (2013)

Nature of distribution of non-metallic inclusions in structural components of weld metal while using arc welding methods
by: V. V. Holovko
Published: (2020)

To the issue of modeling the structure of transverse magnetic field in the area of welding pool
by: A. D. Razmyshljaev, et al.
Published: (2018)

Chemical welding of polyurethanes and their composites
by: A. Vashchuk, et al.
Published: (2021)

Removal of slag crust in arc welding (Review). Part 1. Mechanism of chemical adhesion of slag crust with weld metal
by: S. I. Moravetskij
Published: (2011)

Optimization of chemical composition and structure of metal of repair welds in remedy of defects in welded joints of pipes by using multilayer welding
by: A. A. Rybakov, et al.
Published: (2013)

Influence of conditions of welding pool protection by argon on
by: V. P. Prylutskyi, et al.
Published: (2021)

Effect of technological parameters on sizes of molten metal pool in plasma-arc surfacing of copper plates of MCCB moulds
by: V. G. Kozhemjakin, et al.
Published: (2015)

Computer modeling of optimal control of weld pool position during root joints MIG/MAG welding
by: V. V. Dolinenko, et al.
Published: (2016)

Wear-resistant surfacing with feeding of nanooxides to weld pool
by: V. D. Kuznetsov
Published: (2015)

Numerical modeling and prediction of microstructure of welded joint metal in high-strength steel welding (Review)
by: Ju. Ermolenko, et al.
Published: (2014)

Intensification of flows of molten metal in pool at induction heating
by: A. S. Pismennyj, et al.
Published: (2010)

Nitrogen alloying of weld metal in arc welding of corrosion-resistant steels (Review)
by: V. N. Lipodaev
Published: (2019)

Control of chemical composition of fluxes for special electrometallurgy and welding using the ESA-ISP method
by: L. N. Chubov, et al.
Published: (2011)

Electric conductivity of slag pool in electroslag welding with wire electrode
by: Ju. N. Lankin, et al.
Published: (2009)

Method of evaluation of welding properties of power sources for arc welding
by: N. V. Shevchenko, et al.
Published: (2011)

Arc surfacing of layers of metal of varying composition and hardness
by: V. V. Peremitko, et al.
Published: (2017)

Resistometric method of measuring welding speed for arc welding simulation systems
by: L. M. Lobanov, et al.
Published: (2018)

Possibilities of nanomodification of dendrite structure of weld metal
by: V. V. Golovko
Published: (2018)

Evaluation of shape and sizes of weld pool in surfacing using combined strip electrode
by: V. N. Matvienko, et al.
Published: (2015)

On mechanism of weld metal structure refinement in arc welding under effect of magnetic fields (Review)
by: A. D. Razmyshljaev, et al.
Published: (2018)

Analysis of radiation spectrum of welding arc for monitoring of arc welding (Review)
by: Ja. P. Lazorenko, et al.
Published: (2011)

Influence of dispersed and chemical composition of welding aerosols on their toxicity
by: O. G. Levchenko, et al.
Published: (2024)

Mathematical model of welding circuit in robotic arc consumable electrode welding
by: G. A. Tsybulkin
Published: (2016)

Welding of austenite stainless steel using high-power laser beam and electromagnetic control of weld pool
by: M. Bakhmann, et al.
Published: (2014)

Methods for evaluation of strengthening of metal of welds of high-strength low-alloyed steels
by: V. A. Kostin, et al.
Published: (2011)

Phase composition of metals electrocrystallized on solid and liquid metal cathodes of the same chemical composition
by: O. B. Hirin, et al.
Published: (2017)

Mathematical model of arc temperature and conductivity at metallic and gaseous arc phases
by: Kharin, S.N., et al.
Published: (2010)

Formation of metal pool in current-supplying mould at electroslag process
by: Ju. M. Kuskov, et al.
Published: (2019)

A pool model of the mediator exocytosis into the synapse
by: A. N. Vasilev, et al.
Published: (2019)

Effect of chemical composition of microalloy steel and rate of cooling of HAZ metal of pipe welded joints on its structure and impact strength
by: A. A. Rybakov, et al.
Published: (2013)

Direct numerical modeling of dendritic structure formation in weld metal with dispersed refractory inoculants
by: Ju. Ermolenko, et al.
Published: (2016)