Influence of quenching/partitioning temperature on morphology of 37MnSi5 steel
Gespeichert in:
| Datum: | 2016 |
|---|---|
| Hauptverfasser: | H. R. Ghazvinloo, A. Honarbakhsh-Raouf |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2016
|
| Schriftenreihe: | Materials Science (Physicochemical mechanics of materials) |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000664828 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Mechanical properties of a high Si and Mn steel heat treated by two-step quenching and partitioning
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2017)
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2017)
Влияние давления на магнитные свойства соединения MnSi
von: Панфилов, А.С.
Veröffentlicht: (1999)
von: Панфилов, А.С.
Veröffentlicht: (1999)
Microstructure of weld metal in ck45 carbon steel
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2018)
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2018)
Ductility of welding joints in CK45 carbon steel
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2020)
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2020)
Mechanical strength of the weld metal in CK45 carbon steel
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2020)
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2020)
Effect of the robotic GMAW parameters on HAZ width in HQ130 steel joints
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2021)
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2021)
The numerical modeling of heat-affected zone in GMAW process
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2020)
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2020)
Constitutive Equations and Processing Maps for 49MnVS3 Non-Quenched and Tempered Steel
von: Y. F. Chen, et al.
Veröffentlicht: (2014)
von: Y. F. Chen, et al.
Veröffentlicht: (2014)
Constitutive Equations and Processing Maps for 49MnVS3 Non-Quenched and Tempered Steel
von: Chen, Y.F., et al.
Veröffentlicht: (2014)
von: Chen, Y.F., et al.
Veröffentlicht: (2014)
Influence of replacement of Mn by Cr on magnetocaloric properties of quenched NiMn1–xCrxGe alloys
von: E. Zubov, et al.
Veröffentlicht: (2018)
von: E. Zubov, et al.
Veröffentlicht: (2018)
Формирование гетерофазной структуры в низколегированной стали применением инновационной технологии термической обработки «Quenching and Partitioning»
von: Зурнаджи, В.И., et al.
Veröffentlicht: (2018)
von: Зурнаджи, В.И., et al.
Veröffentlicht: (2018)
The alloying system influence on high-alloy steels structure formation under quenching
von: V. P. Horbatenko
Veröffentlicht: (2014)
von: V. P. Horbatenko
Veröffentlicht: (2014)
The influence of higher Si and Mn content on operation characteristics of wheel steel
von: V. V. Kulyk, et al.
Veröffentlicht: (2019)
von: V. V. Kulyk, et al.
Veröffentlicht: (2019)
Structure-phase transformations in the quenched constructional steel at deformation
von: Ju. F. Ivanov, et al.
Veröffentlicht: (2009)
von: Ju. F. Ivanov, et al.
Veröffentlicht: (2009)
Effect of isothermal quenching temperature on strain hardening of ADI
von: K. O. Hohaev, et al.
Veröffentlicht: (2020)
von: K. O. Hohaev, et al.
Veröffentlicht: (2020)
Ferromagnetic nanoclusters in Si:Mn and GaMnAs annealed at high temperature-pressure
von: J. Bak-Misiuk, et al.
Veröffentlicht: (2009)
von: J. Bak-Misiuk, et al.
Veröffentlicht: (2009)
Ferromagnetic nanoclusters in Si:Mn and GaMnAs annealed at high temperature–pressure
von: Bak-Misiuk, J., et al.
Veröffentlicht: (2009)
von: Bak-Misiuk, J., et al.
Veröffentlicht: (2009)
The influence of sodium dichloroacetate on the oxidative processes in sarcoma 37
von: Sorokina, L.V., et al.
Veröffentlicht: (2011)
von: Sorokina, L.V., et al.
Veröffentlicht: (2011)
Crystallization of rapidly quenched ribbons on the base of Fe₈₂Si₂B₁₆ under isothermal annealing
von: Brud'ko, O.P., et al.
Veröffentlicht: (2005)
von: Brud'ko, O.P., et al.
Veröffentlicht: (2005)
Low-temperature MnBi alloys: electronic and magnetic properties, constitution, morphology and fabrication
von: V. N. Antonov, et al.
Veröffentlicht: (2020)
von: V. N. Antonov, et al.
Veröffentlicht: (2020)
Fatigue strength improvement of AISI E52100 bearing steel by induction heating and repeated quenching
von: Kida, K., et al.
Veröffentlicht: (2011)
von: Kida, K., et al.
Veröffentlicht: (2011)
External Stress Effect on Microstructure and Transformation Plasticity of Hot Work Tool Steel during Quenching
von: Janutienë, R.K., et al.
Veröffentlicht: (2015)
von: Janutienë, R.K., et al.
Veröffentlicht: (2015)
Fatigue strength improvement of AISI E52100 bearing steel by induction heating and repeated quenching
von: E. C. Santos, et al.
Veröffentlicht: (2011)
von: E. C. Santos, et al.
Veröffentlicht: (2011)
Topic 37. The exchange rate
von: S. O. Korablin
Veröffentlicht: (2018)
von: S. O. Korablin
Veröffentlicht: (2018)
Structural Characterization and Precipitation in AlMg5Si2Mn Alloy
von: V. V. Boyko, et al.
Veröffentlicht: (2014)
von: V. V. Boyko, et al.
Veröffentlicht: (2014)
Quantum quench for the biaxial spin system
von: Zvyagin, A.A.
Veröffentlicht: (2018)
von: Zvyagin, A.A.
Veröffentlicht: (2018)
Quantum quench for the biaxial spin system
von: A. A. Zvyagin
Veröffentlicht: (2018)
von: A. A. Zvyagin
Veröffentlicht: (2018)
Cavitation-resistant Cr-Mn-N-V steel for high-temperature energy
von: P. N. Kucherenko, et al.
Veröffentlicht: (2018)
von: P. N. Kucherenko, et al.
Veröffentlicht: (2018)
Authors index to volume 37 (2015)
Veröffentlicht: (2015)
Veröffentlicht: (2015)
Subject index to volume 37 (2015)
Veröffentlicht: (2015)
Veröffentlicht: (2015)
Ising antiferromagnet with mobile, pinned, and quenched defects
von: Selke, W., et al.
Veröffentlicht: (2005)
von: Selke, W., et al.
Veröffentlicht: (2005)
Superconductor–insulator transitions of quench-condensed films
von: Goldman, A.M.
Veröffentlicht: (2010)
von: Goldman, A.M.
Veröffentlicht: (2010)
New direction in liquid quenching media development
von: N. I. Kobasko, et al.
Veröffentlicht: (2019)
von: N. I. Kobasko, et al.
Veröffentlicht: (2019)
Basis Partitions and Their Signature
von: Alladi, Krishnaswami
Veröffentlicht: (2025)
von: Alladi, Krishnaswami
Veröffentlicht: (2025)
Paradeterminants and partition polynomials
von: Zators’kyi, R. A., et al.
Veröffentlicht: (2008)
von: Zators’kyi, R. A., et al.
Veröffentlicht: (2008)
Influence of bacterial lectins on some reactions of nonspecific immunity in sarcoma 37 transplanted mice
von: Tanasienko, O.A., et al.
Veröffentlicht: (2010)
von: Tanasienko, O.A., et al.
Veröffentlicht: (2010)
The influence of temperature and composition of tungstate-molybdate melts on the morphology of their electrolysis sediments
von: V. V. Malyshev, et al.
Veröffentlicht: (2012)
von: V. V. Malyshev, et al.
Veröffentlicht: (2012)
Partitions of groups into sparse subsets
von: Protasov, I.
Veröffentlicht: (2012)
von: Protasov, I.
Veröffentlicht: (2012)
Densities, submeasures and partitions of groups
von: Banakh, T., et al.
Veröffentlicht: (2014)
von: Banakh, T., et al.
Veröffentlicht: (2014)
On the m-ary partition numbers
von: Kachi, Y., et al.
Veröffentlicht: (2015)
von: Kachi, Y., et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Mechanical properties of a high Si and Mn steel heat treated by two-step quenching and partitioning
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2017) -
Влияние давления на магнитные свойства соединения MnSi
von: Панфилов, А.С.
Veröffentlicht: (1999) -
Microstructure of weld metal in ck45 carbon steel
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2018) -
Ductility of welding joints in CK45 carbon steel
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2020) -
Mechanical strength of the weld metal in CK45 carbon steel
von: H. R. Ghazvinloo, et al.
Veröffentlicht: (2020)