Mathematical and structural model information technology improvement of drying Printing materials

Mathematical and structural model information technology improvement of drying Printing materials

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	Ya. Yu. Koliano, T. S. Sass, Ye. H. Ivanyk, O. V. Sikora, M. V. Doroshenko
Format:	Artikel
Sprache:	English
Veröffentlicht:	2016
Schriftenreihe:	Mathematical and computer modelling. Series: Technical sciences
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000685494
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

IT-Tools to Optimize the Process of Conductive Drying of Polygraphic Materials
von: Ya. Yu. Koliano, et al.
Veröffentlicht: (2017)

Simulation of the Process of Heat and mass Transfer in Composite Polygraph Structures
von: Ya. Yu. Koliano, et al.
Veröffentlicht: (2018)

Fundamental approaches in mathematical modeling of drying processes of capillary-porous and dispersed materials
von: B. Haivas
Veröffentlicht: (2017)

Information Technology of Domain-Specific Mathematical Modelling
von: V. I. Mezhuiev
Veröffentlicht: (2013)

The informational technology for symbols reading of printed circuit board
von: V. N. Antoshchuk, et al.
Veröffentlicht: (2006)

Mathematical modeling of the solvent was evaporated in explosion power technology drying impregnated lacquer winding electric machines
von: V. K. Sharov, et al.
Veröffentlicht: (2011)

Scientific and applied aspects of improvement of national foreign technology and drying
von: I. I. Haponiuk
Veröffentlicht: (2017)

Energy saving technologies for drying of heat-sensitive materials
von: Yu. F. Sniezhkin, et al.
Veröffentlicht: (2019)

Improvement of corporate governance of publishing and printing enterprises
von: Ye. M. Palyha, et al.
Veröffentlicht: (2019)

Modified nanocomposite materials for UV-technologies for products finishing printing by lamination
von: V. H. Sysiuk, et al.
Veröffentlicht: (2020)

Mathematical modeling of convection drying process of wood taking into account the boundary of phase transitions
von: Y. I. Sokolovskyy, et al.
Veröffentlicht: (2021)

Mathematical Model of the Information Flow
von: Yu. V. Kabanenko
Veröffentlicht: (2013)

Heat pump technologies of low temperature drying of capillary-porous materials spherical shape
von: Yu. F. Sniezhkin, et al.
Veröffentlicht: (2020)

Improvement of technology of arc spot welding of overlap joints using results of mathematic modeling
von: O. V. Makhnenko, et al.
Veröffentlicht: (2010)

Modeling of internal diffusion mass transfer during filtration drying of capillary-porous material
von: Ya. Gnativ, et al.
Veröffentlicht: (2020)

Technological principles of drying into layer fluidizated and its application for kaolin dry enrichment
von: N. A. Dvornikov
Veröffentlicht: (2018)

Information and mathematical support of cast iron desulfurization technology
von: D. M. Tohobytska, et al.
Veröffentlicht: (2020)

Technology of Drying Secondary Crushed Polyethylene
von: A. O. Satserdotov, et al.
Veröffentlicht: (2018)

Mathematical processing of results experimental studies of low-temperature modes of drying of capillary-porous materials of spherical shape
von: Yu. F. Sniezhkin, et al.
Veröffentlicht: (2019)

Dry ice is the useful material in welding
von: S. N. Zhiznjakov
Veröffentlicht: (2014)

Modeling of heat and mass transfer in the process of drying of colloid capillary - porous materials
von: Zh. O. Petrova, et al.
Veröffentlicht: (2019)

Mathematical Model and Automation of Information Technology Planning of Production and Economic Activity of a Company
von: O. M. Vaskiv, et al.
Veröffentlicht: (2013)

Neutralization of Gases During Metal Casting According to Gasified Models and Prerequisites for Using 3D Printed Models for This
von: V. S. Doroshenko
Veröffentlicht: (2021)

Cyclic microwave drying dense layer of grain materials
von: I. L. Boshkova, et al.
Veröffentlicht: (2016)

On Improving the Efficiency of Mathematical Modeling of the Problem of Stability of Construction
von: O. V. Chystiakov
Veröffentlicht: (2020)

Forecast Evaluation of Efficiency of Increasing of Welding Protection of Elements of Welded Constructions by Thermal Properties
von: O. V. Sikora, et al.
Veröffentlicht: (2018)

Development of technology for the production of new form of dried product
von: Yu. F. Sniezhkin, et al.
Veröffentlicht: (2015)

New information operators in mathematical modeling (Review)
von: I. V. Serhiienko, et al.
Veröffentlicht: (2018)

Mathematic modelling of sorption properties for carbon materials
von: V. M. Cherevko, et al.
Veröffentlicht: (2015)

Construction of the solution of the thermal-convective drying problem for porous solids in drying plants
von: Ye. Ya. Chaplya, et al.
Veröffentlicht: (2015)

The pouring out of dry sand from molds without dust
von: V. S. Doroshenko
Veröffentlicht: (2011)

Information Technology as a Factor Improving the Functioning of Enterprises
von: I. O. Shapovalova, et al.
Veröffentlicht: (2022)

Mathematical modeling of damage accumulation under conditions of creep and corrosion cracking of structural materials
von: Zhigang Liu, et al.
Veröffentlicht: (2020)

Informational and Communicational Aspects of Forming and Functioning Scientific Schools of Publishing and Printing Branch
von: E. P. Semeniuk, et al.
Veröffentlicht: (2016)

Convective drying of granular material with taking into account two-layered structure of an individual grain 69-80
von: B. Haivas, et al.
Veröffentlicht: (2014)

Using of composite materials for friction parts of printing equipment
von: T. Roik, et al.
Veröffentlicht: (2017)

New Approaches on Improvement of the Assessment of the Influence of Basic Institutes on the Development of Publishing and Printing Activity in Ukraine
von: Ye. M. Palyha, et al.
Veröffentlicht: (2018)

Supercomputer technologies and mathematical modeling of complex systems
von: O. M. Khimich
Veröffentlicht: (2018)

On a Mathematical Model of Changing the Properties of Material
von: N. O. Kuzin
Veröffentlicht: (2015)

Energy Efficiency Technology of Sand Drying in Fluidized Bed Apparatus
von: Ju. I. Khvastukhin, et al.
Veröffentlicht: (2010)