Buchumschlag

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	A. S. Osipov, P. Klimczyk, S. Cygan, Iu. A. Melniichuk, I. A. Petrusha, L. Jaworska
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2016
Schriftenreihe:	Superhard Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000692644
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
von: Osipov, A.S., et al.
Veröffentlicht: (2016)

Influence of reinforcement by the whiskers of Si₃N₄ and Mg₂B₂O₅ on the properties of cBN-based composites
von: Rumiantseva, Yu.Yu., et al.
Veröffentlicht: (2019)

Influence of reinforcement by the whiskers of Si3N4 and Mg2B2O5 on the properties of cBN-based composites
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2019)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
von: V. M. Bushlja, et al.
Veröffentlicht: (2014)

The influence of SiC and Al2O3 whiskers on the properties of whisker-reinforced cBN-based composites
von: Ju. Ju. Rumjantseva, et al.
Veröffentlicht: (2019)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
von: T. Zhao, et al.
Veröffentlicht: (2017)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2016)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
von: S. A. Klimenko, et al.
Veröffentlicht: (2012)

Thermobaric sintering of cBN-Cr3C2 composite
von: K. V. Slipchenko, et al.
Veröffentlicht: (2017)

Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
von: S. A. Klimenko, et al.
Veröffentlicht: (2015)

The influence of VC–Al additive on wear resistance of cBN-based composites
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)

Superhard pcBN tool materials with Ti₃SiC₂ MAX-phase binder: structure, properties, application
von: Kolabylina, T., et al.
Veröffentlicht: (2017)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2012)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Sintering of cBN based materials with TaC binder for cutting tool application
von: K. V. Slipchenko, et al.
Veröffentlicht: (2020)

Фізико–механічні властивості надтвердих композитів систем cBN-Ті, cBN-Al, cBN-перехідний метал-Al, отриманих реакційним спіканням за високого тиску
von: Романенко, Я.М., et al.
Veröffentlicht: (2015)

Superhard pcBN tool materials with Ti3SiC2 MAX-phase binder: structure, properties, application
von: T. Kolabylina, et al.
Veröffentlicht: (2017)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
von: Ya. M. Romanenko, et al.
Veröffentlicht: (2017)

Obtaining superhard composites of the BL group in the cBN(Al)–SiB4—WC system under high pressure and high temperature conditions
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2019)

The influence of VC-Al additive content on structure and phase composition of cBN based superhard materials
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)

cBN–Cu composite: production method and physical properties
von: M. V. Nikishina
Veröffentlicht: (2012)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
von: N. E. Stakhniv
Veröffentlicht: (2013)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
von: K. O. Diadiura, et al.
Veröffentlicht: (2015)

Термобаричне спікання композиту cBN–Cr₃C₂
von: Сліпченко, К.В., et al.
Veröffentlicht: (2017)

Electrical characteristics of thermobaric sintered cBN–NbN composite
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2020)

Отримання надтвердих композитів групи BL в системі cBN(Al)—SiB₄—WC в умовах високих р,Т-параметрів
von: Стратійчук, Д.А., et al.
Veröffentlicht: (2019)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
von: Han, P., et al.
Veröffentlicht: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
von: Chen, L., et al.
Veröffentlicht: (2017)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
von: P. Han, et al.
Veröffentlicht: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
von: L. Chen, et al.
Veröffentlicht: (2017)

An increase of operating characteristics of cBN cutters by improving their damping properties
von: L. N. Devin, et al.
Veröffentlicht: (2012)

HP-HT sintering, microstructure, and properties of B6O and TiC-containing composites based on cBN
von: D. V. Turkevich, et al.
Veröffentlicht: (2015)

Твердые растворы в системах cBN-Al и cBN-Al-TiB₂, полученные при высоких давлениях и температурах
von: Беженар, Н.П., et al.
Veröffentlicht: (2011)

A stressed state in the cutting zone of the PcBN tool with coating based on TiAlSiYN system
von: A. S. Manokhin, et al.
Veröffentlicht: (2022)

Features of the formation of the composite structure of cBN-TiC-Al system
von: M. P. Bezhenar, et al.
Veröffentlicht: (2019)

Electrical resistance of the islet film of gold on the surface of thermobarically sintered cBN-ceramics
von: I. P. Fesenko, et al.
Veröffentlicht: (2021)

Co-crystallization of filamentous and globular carbon on diamond and cBN during production of composite abrasive thermostable powders intended for grinding tools
von: V. G. Poltoratskij
Veröffentlicht: (2019)

Физико-механические свойства β-Si₃N₄, спеченного при высоких давлениях
von: Урбанович, В.С., et al.
Veröffentlicht: (2017)