Buchumschlag

Effect of physical and mechanical properties of diamond synthesized in the presence of ferroalloys, to wear resistance rock cutting tool

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	N. V. Novikov, G. D. Ilnitskaja, A. M. Isonkin, I. N. Zajtseva, Ju. P. Ushchapovskij, G. S. Grishchenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2016
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000713022
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool
von: T. O. Prikhna, et al.
Veröffentlicht: (2022)

Investigation of the indenter penetration zone in the wear particle of the matrix of a diamond-containing rock-cutting tool
von: O. P. Vynohradova, et al.
Veröffentlicht: (2024)

Character of wear of synthetic diamonds differentstrength in impregnated drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2018)

Influence of the uniformity of synthetic diamond grits on the drilling tool performance
von: N. V. Novikov, et al.
Veröffentlicht: (2012)

Size separation of diamond nanopowders synthesized by detonation
von: G. P. Bogatyrjova, et al.
Veröffentlicht: (2012)

The effect of titanium and tungsten coating the surface of diamond monocrystals on the wear resistance of rock-cutting elements made from them
von: O. O. Bochechka, et al.
Veröffentlicht: (2019)

The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2013)

Influence of diamond defects on workability drill bits
von: A. M. Isonkin, et al.
Veröffentlicht: (2017)

Physico-mechanical and operational characteristics of synthetic diamond powders, synthesized with the use of Ni–Mn and Fe–Si carbon solvents
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2019)

Formation of diamond-carbide granules to be used in rock destruction tools
von: N. V. Novikov, et al.
Veröffentlicht: (2012)

Influence of physicomechanical and physicochemical characteristics of synthetic diamonds AC20 100/80 after separation in magnetic and electric fields on wear-resistance of the grinding tool
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2018)

The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
von: A. M. Kuzej, et al.
Veröffentlicht: (2019)

Reinforcement of rock cutting tool by large synthetic monocrystal
von: M. S. Popova
Veröffentlicht: (2019)

Influence of macrostructure of diamond-containing composite materials on cutting capacity of the tool
von: A. M. Kuzej, et al.
Veröffentlicht: (2018)

Intensity of wear of functional elements made of diamond-containing composite materials during the operation of tools in the process of rock destruction
von: A. L. Maistrenko, et al.
Veröffentlicht: (2023)

Drilling carbide rock cutting tool of a new type
von: A. A. Kozhevnikov, et al.
Veröffentlicht: (2016)

Researches on the effect of different factors on the results of the interaction between rock-cutting tool and rock and decision-making
von: G. M. Efendiev, et al.
Veröffentlicht: (2016)

Investigation of changes in physico-mechanical and physical-chemical properties of diamond diamond systems of the Ni-Mn-C system for increasing the operating characteristics of the grinding tool
von: G. D. Ilnitskaja, et al.
Veröffentlicht: (2017)

Influence of durability of synthetic diamonds on efficiency of destruction of mountain rock drill bits
von: A. M. Isonkin
Veröffentlicht: (2016)

Resource-saving issues when recovering diamond particles from rock sludge, which was formed during the operation of the diamond drilling and stone-working tool
von: N. A. Olejnik, et al.
Veröffentlicht: (2019)

Efficiency of the use of diamond drilling bits with a different intensity of the destruction of the mountain rocks
von: A. M. Isonkin
Veröffentlicht: (2017)

Effect of thermodynamic cyclic loads for high-strength diamond wear mechanism destroying mountain breed
von: A. M. Isonkin, et al.
Veröffentlicht: (2019)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
von: K. O. Diadiura, et al.
Veröffentlicht: (2015)

Effective rock cutting tool for drilling small diameter for oil and gas
von: Ju. E. Budjukov, et al.
Veröffentlicht: (2016)

Forecasting the physical and chemical and thermophysical properties of nickel-containing ferroalloys
von: A. F. Petrov, et al.
Veröffentlicht: (2018)

Wear resistance of diamond-dolomite and diamond-strontium carbonate composites produced under HPHT-conditions
von: N. A. Bondarenko, et al.
Veröffentlicht: (2018)

Use engraving machines new generation for studies of wear diamonds in the destruction of rocks
von: A. I. Vdovichenko, et al.
Veröffentlicht: (2016)

Study on cutting performance and tool wear of micro-textured tool for milling Ti6Al4V
von: Shen Xiang-yu, et al.
Veröffentlicht: (2017)

Prediction of the melting time of complex ferroalloys by the method of physical and chemical modeling
von: A. F. Petrov, et al.
Veröffentlicht: (2019)

Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)

Intellectual System of Refusals Diagnosing and Cutting Part of Cutting Tools Renewal
von: A. G. Derevjanchenko
Veröffentlicht: (2013)

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

On the interaction of the detonation-synthesized ultradisperse diamond and turbostratic boron nitride
von: G. S. Olejnik, et al.
Veröffentlicht: (2017)

Peculiarities of glucose oxidase adsorption by mesoporous aluminosilicates synthesized in presence of biotemplates
von: Smelaya, Z.V., et al.
Veröffentlicht: (2002)

The intensity of wearing of rock-breaking elements from diamond-containing materials in dependens of chemical composition and a method of diamond coating
von: A. L. Maistrenko, et al.
Veröffentlicht: (2017)

Temperature dependence of microhardness of composites based on diamond nanopowder synthesized by detonation
von: A. A. Bochechka, et al.
Veröffentlicht: (2012)

The software tool of constructive-synthesizing modeling
von: Shynkarenko, V.I., et al.
Veröffentlicht: (2024)

Predictive evaluation of physical and chemical properties of new compositions of chromium-containing ferroalloys
von: O. P. Petrov, et al.
Veröffentlicht: (2022)

Justification of the wear – out rate of drilling tool by the nature of destruction of matrix of diamond – composit material
von: O. P. Vynohradova, et al.
Veröffentlicht: (2016)

Analysis of cutting edge wear during drilling composite materials
von: L. N. Devin, et al.
Veröffentlicht: (2017)