Buchumschlag

Study of cBN based composite cutters wearing and its influence on the fracture tool probability at the fine turning of the hardened steels

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	N. E. Stakhniv, L. N. Devin
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2016
Schriftenreihe:	Tooling materials science
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000713080
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Study of the effect of the wear of a cutting tool from cBN-based composite on the probability of the tool fracture in finish turning of hardened steels
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Investigation of the effect of cutting conditions on the roughness of a surface machined in fine turning of hardened steel by cutters of a cBN-based composite
von: N. E. Stakhniv
Veröffentlicht: (2013)

Study of the effect of the wear of a cutting tool equipped with a plate of a cBN-based composite on its vibrations in finish turning of hardened steels
von: N. E. Stakhniv, et al.
Veröffentlicht: (2012)

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
von: N. E. Stakhniv
Veröffentlicht: (2017)

Wear and life of tools with inserts from cBN-based polycrystalline superhard materials in the finish turning of hardened steels at heavy feeds
von: S. A. Klimenko, et al.
Veröffentlicht: (2012)

Tool wear and tool life of PCBN, binderless cBN and wBN_cBN tools in continuous finish hard turning of cold work tool steel
von: V. M. Bushlja, et al.
Veröffentlicht: (2014)

An increase of operating characteristics of cBN cutters by improving their damping properties
von: L. N. Devin, et al.
Veröffentlicht: (2012)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
von: Ye. Stakhniv, et al.
Veröffentlicht: (2022)

Effect of damping properties of cutters on the probability of failure of the CBN plates
von: L. M. Devin, et al.
Veröffentlicht: (2016)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Investigation of performance of tools with reduced cBN concentration in grinding hardened steels
von: V. K. Starkov, et al.
Veröffentlicht: (2014)

Study of the contact zone parameters and stresses on the rake face of a tool equipped by a cBN-based PSHM in turning hardened steel
von: S. A. Klimenko, et al.
Veröffentlicht: (2015)

Investigation of cutting temperature in turning cutters with diamond-carbide plates
von: L. N. Devin, et al.
Veröffentlicht: (2018)

Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
von: Osipov, A.S., et al.
Veröffentlicht: (2016)

The influence of the cutting speed on the temperature and forces at the precision turning of nonferrous metals using cutters with round diamond-hard-alloyed plates
von: N. E. Stakhniv, et al.
Veröffentlicht: (2019)

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
von: T. Zhao, et al.
Veröffentlicht: (2017)

Cutting section parametrs for oblique fine turning with a radius tool
von: L. M. Devin, et al.
Veröffentlicht: (2019)

The mechanism of wearing of cutting tools based on cBN for precision wear-resistant high-chromium pig-iron
von: K. O. Diadiura, et al.
Veröffentlicht: (2015)

Composites of the cBN–Si3N4 system reinforced by SiCw for turning tools
von: A. S. Osipov, et al.
Veröffentlicht: (2016)

An experimental study of the influence of tool material and fine turning conditions on the level of acoustic emission signals
von: L. N. Devin, et al.
Veröffentlicht: (2016)

The influence of cutting speed on cutting temperatures and forces in fine turning of VT1-0 titanium alloy by a PCD tool
von: L. N. Devin, et al.
Veröffentlicht: (2019)

The correlation model of acoustic emission in fine diamond turning
von: L. N. Devin, et al.
Veröffentlicht: (2017)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
von: Han, P., et al.
Veröffentlicht: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
von: Chen, L., et al.
Veröffentlicht: (2017)

Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
von: P. Han, et al.
Veröffentlicht: (2018)

Nano-scratching resistance of highchromium white cast iron and its correlation with wear of cBN tool in machining
von: L. Chen, et al.
Veröffentlicht: (2017)

The Fine Structure of the Surface Layer and Tribological Properties of QT 41Cr4 Steel Parts after Finish Turning Machining with Coated Cutters
von: M. Enek, et al.
Veröffentlicht: (2014)

The influence of VC–Al additive on wear resistance of cBN-based composites
von: K. V. Slipchenko, et al.
Veröffentlicht: (2018)

Damping properties RSBN composites of the cBN–Ti, cBN–Al–metal systems, in dependence from technological conditions of receipt
von: Ya. M. Romanenko, et al.
Veröffentlicht: (2017)

Analysis of thermobaric contact phenomena and calculation of temperature fields during finishing turning of VT1-0 titanium alloy using a cutter with a diamond carbide insert
von: L. M. Devin, et al.
Veröffentlicht: (2020)

Sintering of cBN based materials with TaC binder for cutting tool application
von: K. V. Slipchenko, et al.
Veröffentlicht: (2020)

Wear intensity of the PcBN tools with nanolayered protective coating
von: A. S. Manokhin, et al.
Veröffentlicht: (2020)

Фізико–механічні властивості надтвердих композитів систем cBN-Ті, cBN-Al, cBN-перехідний метал-Al, отриманих реакційним спіканням за високого тиску
von: Романенко, Я.М., et al.
Veröffentlicht: (2015)

Pecularities of kinetics of delayed fracture of welded joints of hardening steels
von: Ju. Skulskij
Veröffentlicht: (2009)

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
von: Kryzhanivskyy, V., et al.
Veröffentlicht: (2017)

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
von: V. Kryzhanivskyy, et al.
Veröffentlicht: (2017)

Study of performance of cbn incisors &quot;borsinit&quot; when turning titanium alloy VT1-0
von: L. N. Devin, et al.
Veröffentlicht: (2016)

Термобаричне спікання композиту cBN–Cr₃C₂
von: Сліпченко, К.В., et al.
Veröffentlicht: (2017)

Influence of the tool shape and location of cutters in it on the force distribution between the cutters at drilling gas-drainage boreholes
von: V. G. Krasnik
Veröffentlicht: (2013)

Твердые растворы в системах cBN-Al и cBN-Al-TiB₂, полученные при высоких давлениях и температурах
von: Беженар, Н.П., et al.
Veröffentlicht: (2011)