Improving the efficiency of the SLM-process by adjusting the focal spot diameter of the laser beam
Gespeichert in:
| Datum: | 2021 |
|---|---|
| Hauptverfasser: | S. V. Adzhamskyi, H. A. Kononenko, R. V. Podolskyi |
| Format: | Artikel |
| Sprache: | English |
| Veröffentlicht: |
2021
|
| Schriftenreihe: | Automatic Welding |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0001248847 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
-
Influence of technological parameters of SLM-process on porosity of metal products
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2020) -
Application of SLM-technology for manufacture of dental implants from Ti – 6Al – 4V alloy
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021) -
Influence of disturbances of welding gun axial symmetry on focal spot position
von: O. K. Nazarenko, et al.
Veröffentlicht: (2012) -
The influence of time interval between application of layers by SLM-technology on the structure and properties of INCONEL 718 alloy
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021) -
Studying the Influence of Orientation and Layer Thickness on the Physico-Mechanical Properties of Co-Cr-Mo Alloy Manufactured by the SLM Method
von: S. Adjamskiy, et al.
Veröffentlicht: (2022)