Cover Image

Formation of structural-phase states, defect substructure and properties of a surface of thermomechanically hardened low-carbon steel

Saved in:

Bibliographic Details
Date:	2016
Main Authors:	V. E. Gromov, Ju. F. Ivanov, E. G. Belov, V. B. Kosterev, D. A. Kosinov
Format:	Article
Language:	English
Published:	2016
Series:	Progress in Physics of Metals
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000807928
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Regularities and mechanisms of thermomechanical hardening of rolled low-carbon steel
by: V. E. Gromov, et al.
Published: (2011)

Formation of structure, phase composition and faulty substructure in the bulk- and differentially-hard-tempered rails
by: V. E. Gromov, et al.
Published: (2014)

Thermomechanical strengthening of steels with low stability austenite
by: A. S. Opalchuk, et al.
Published: (2016)

Work hardening of steel with a bainite structure
by: V. E. Gromov, et al.
Published: (2015)

Nitride hardening influence on the phase transformation and the formation of high-carbon steel structure upon cooling after austenitizing
by: Ya. Shypytsyn, et al.
Published: (2014)

Influence of dispersion nitride hardening on formation of structure of high-carbon steels
by: Ya. Shypytsyn, et al.
Published: (2017)

Effect of pulsed low-voltage plasma and hardening of the matrix nanodimensional nitride phases on the structure of cemented layer of steel
by: Ya. Shypytsyn, et al.
Published: (2011)

Phase transformations in low-carbon steels, alloyed a manganese
by: M. F. Evsjukov, et al.
Published: (2012)

Analysis of Gas Nitriding Characteristics under Different Cold Hardening and Nitriding Pressure Conditions for Low-Carbon Low-Alloy Steel
by: Zhou, Z A., et al.
Published: (2018)

Computer Modelling of Mechanism of Formation of Localized Synergetic Defect Substructures under Plastic Deformation of Metal Nanocrystals
by: O. S. Hatsenko, et al.
Published: (2014)

Thermomechanical treatment of stainless steel piston rings
by: A. V. Volokitin, et al.
Published: (2022)

The influence of mechanical and corrosion defects on strength of thermally hardened reinforcement bars of 35HS steel
by: Ya. Blikharskyi, et al.
Published: (2018)

Structure-phase transformations in the quenched constructional steel at deformation
by: Ju. F. Ivanov, et al.
Published: (2009)

Arc brazing of low-carbon steels
by: V. F. Khorunov, et al.
Published: (2013)

The effect of dispersion nitride hardening on the parameters of γ→α transformation in night-carbon steels
by: Ja. Shipitsyn, et al.
Published: (2017)

Formation of Coatings by a Method of Overlay Laser Welding of Powders of Titanium and Silicon Carbide on a Surface of Low-Carbon Steel
by: T. V. Tarasova, et al.
Published: (2013)

The analysis of the defects on the surface of galvanized steel structures
by: Lie-long Wang, et al.
Published: (2017)

Regularities of formation of structural–phase states on a surface of metals and alloys at an electroexplosive alloying
by: D. A. Romanov, et al.
Published: (2015)

Formation of nanodimensional polygonization substructure in sprayed electric arc coatings
by: A. N. Dubovoj, et al.
Published: (2017)

Direct martensitic transformations of low-carbon steels
by: Belykh, D.G., et al.
Published: (2023)

Specific Boundaries in Ferrite of Low-Carbon Steels
by: G. D. Sukhomlin
Published: (2013)

Fatigue life of steel specimens 40KH after wear-resistant surfacing with a sublayer of low-carbon steel
by: I. O. Riabtsev, et al.
Published: (2021)

Efficiency of application of substructure strengthened tubes on heating surfaces of supercritical boiler blocks
by: A. V. Gruzevich
Published: (2017)

Fatigue of low-carbon and low-alloys steels under conditions of Fretting
by: G. V. Tsybanev, et al.
Published: (2009)

Determination of characteristics of substructure and orientation inhomogeneity in polycrystalline specimens
by: Badiyan, E.E., et al.
Published: (2014)

Structure and substructure of zinc selenide films
by: Ivashchenko, M.M., et al.
Published: (2011)

Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
by: Kuchynskyi, K. A., et al.
Published: (2023)

Low-temperature anomalies of the hardened tin conductivity
by: Voyevodin, V.N., et al.
Published: (2015)

Hydrogen permeability of surface nano-crystal structures of carbon steel
by: H. M. Nykyforchyn, et al.
Published: (2014)

Effect of drawing dies with shear on the structure and the properties of low-carbon steel
by: E. G. Pashinskaja, et al.
Published: (2015)

Isothermal hardening of iron-carbon alloys combined with their casting
by: V. S. Doroshenko, et al.
Published: (2024)

Changes of the micro profile of the machined surface due to the size wear of the cutter from the composite cbn at the finish turning of hardened steel
by: N. E. Stakhniv
Published: (2017)

Modification of the activated carbon surface by gaseous-phase chlorination with carbon tetrachloride
by: K. I. Veselovska, et al.
Published: (2015)

Hardening of steel 40Cr by combined treatment using laser.
by: A. F.I. Idan, et al.
Published: (2016)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
by: A. M. Nesterenko, et al.
Published: (2009)

Low carbon steel for hot metal deformation tools (review)
by: S. V. Bobyr, et al.
Published: (2019)

The influence of mechanical loading on the local remanence low-Carbon steels
by: Ju. V. Moiseev, et al.
Published: (2014)

Drawing with shear as an effective method of the control of the structure and the properties for low-carbon steel
by: Pashinskaya, E., et al.
Published: (2015)

Тhe dose dependence of inert gases irradiation hardening of 316 austenitic stainless steel after low temperature irradiation
by: Karpov, S.A., et al.
Published: (2018)

Quality improving and widening of the range of hardened rails made of converter steel
by: A. S. Rudjuk, et al.
Published: (2013)