Buchumschlag

The possibility of increasing electromagnetic pressure in two-zone magnetodynamic installations for casting of aluminum alloys

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	V. I. Dubodelov, V. A. Seredenko, V. N. Fikssen, A. A. Parenjuk, A. O. Gorshkov, M. S. Gorjuk
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2016
Schriftenreihe:	Casting processes
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001031633
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Research electric, magnetic and power characteristics at idle mode of mock-updevice of two-zone magnetodynamic installation for casting aluminum alloy
von: V. I. Dubodelov, et al.
Veröffentlicht: (2016)

Research laws of electromagnetic forces interactions in magnetodynamic installation for aluminium alloys. Report 1
von: M. A. Slazhnev, et al.
Veröffentlicht: (2015)

Researching electric, pressure and mass flow characteristics of model device of two-zone magnetody namic installation at its testing on liquid metal
von: V. I. Dubodelov, et al.
Veröffentlicht: (2017)

Prospects of expansion of magnetodynamic devices application in casting technologies
von: V. N. Fikssen
Veröffentlicht: (2015)

Phase control of electromagnetic processes in the magnetodynamic installations with twin induction units
von: A. A. Shcherba, et al.
Veröffentlicht: (2013)

Automatic control of filling process of the molds at casting under low electromagnetic pressure
von: K. S. Bogdan, et al.
Veröffentlicht: (2017)

Magneto-weighting casting installation with microprocessor ACS electrophysical treatment and dosage of molten aluminum
von: K. S. Bogdan, et al.
Veröffentlicht: (2017)

Modeling of the process circulating filtration of aluminium melt in the magnetodynamic installation
von: O. V. Jashchenko
Veröffentlicht: (2015)

Penetration of aluminium alloys with active elements in to the magnetodynamic furnace
von: V. O. Seredenko, et al.
Veröffentlicht: (2009)

Increasing the Dosing Accuracy of Magnetodynamic Foundry Equipment
von: O. M. Smirnov, et al.
Veröffentlicht: (2021)

Casting with Crystallization under Pressure of Aluminum Alloys
von: K. A. Batyshev, et al.
Veröffentlicht: (2018)

Energy efficient modes of magnetodynamic installations using thyristor voltage regulators with phase control
von: A. A. Shcherba, et al.
Veröffentlicht: (2017)

Increase of homogeneous structure of the alloy on the basis of aluminum by the impact of constant magnetic field on micro-scale disturbances in the melt flow at its casting
von: E. V. Seredenko
Veröffentlicht: (2018)

Justification conceptual approach realization of dynamics control technological parameters of magnetodynamic installation working
von: Ju. Kizilova
Veröffentlicht: (2014)

Extreme pressure properties of lubricants under die casting aluminum alloys
von: A. M. Mikhaltsov, et al.
Veröffentlicht: (2011)

Modernization of process control of manufacturing magnesium disks to install low-pressure casting
von: T. V. Lysenko, et al.
Veröffentlicht: (2014)

On the features of constant magnetic field action on aluminum alloys
von: V. I. Dubodelov, et al.
Veröffentlicht: (2018)

Electrothermal Installation for Processing of Waste of Aluminum Production
von: A. M. Verkhovliuk, et al.
Veröffentlicht: (2021)

Increase of properties of aluminum alloys by the action of a permanent magnetic field on melting at solid state
von: V. I. Dubodielov, et al.
Veröffentlicht: (2018)

The Efficiency of Electromagnetic Treatment for the Production of Heterogeneous Endogenous and Exogenous Aluminum Composites
von: A. V. Narivskyi, et al.
Veröffentlicht: (2021)

Fundamentals of electromagnetic monitoring of the city in the conditions of increasing electromagnetic pressure on the environment
von: O. I. Zaporozhets, et al.
Veröffentlicht: (2015)

Application of Electromagnetic Forces in Continuous Steel Casting
von: V. I. Dubodelov, et al.
Veröffentlicht: (2019)

Evolution of fundamental researches for applied developments in field of metals and alloys electromagnetic treatment
von: V. I. Dubodelov, et al.
Veröffentlicht: (2016)

Obtaining castings from the AK7 alloy under electromagnetic pressure
von: O. V. Yashchenko
Veröffentlicht: (2018)

Action on Phases and Properties of Cast Aluminum Alloy with Copper and Silicon of Constant Magnetic Field, Supposed on a Cooling and Solidifying Melt
von: E. V. Seredenko
Veröffentlicht: (2019)

Influence of temperature and time melts processing on conductor aluminum alloy cast structure and constant magnetic field during its cooling
von: E. V. Seredenko
Veröffentlicht: (2017)

Structure forming of the aluminum alloy with hyperperitectic content of manganese and titan by constant magnetic field action on melt during its solidification
von: V. Y. Dubodelov, et al.
Veröffentlicht: (2015)

Electron beam casting installation for multipurpose appointing
von: S. V. Ladokhin
Veröffentlicht: (2014)

structure and microhardness of the al-mn alloys, with compounds of eutectic and peritectic transitions zone at chill mold casting under constant magnetic field superimposition
von: V. I. Dubodelov, et al.
Veröffentlicht: (2014)

The growth of aluminum casting production at the beginning of the XXI century
von: V. A. Gnatush, et al.
Veröffentlicht: (2019)

Affect of melt motion on addition dispersion in the melt volume at the beginning stage of alloying components of the monotectic system
von: V. I. Dubodelov, et al.
Veröffentlicht: (2015)

Sasting by crystallization under pressure of aluminum alloys
von: K. A. Batyshev, et al.
Veröffentlicht: (2018)

Extraordinary Flooding of Aluminum Alloy Castings
von: F. M. Kotliarskyi
Veröffentlicht: (2020)

Electron-beam installations for melting and casting of zirconium alloys
von: S. V. Ladokhin
Veröffentlicht: (2017)

Advantages of Casting Partially Crystallized Aluminum Alloys (Reocasting)
von: V. P. Golovachenko, et al.
Veröffentlicht: (2019)

Influence of copper, magnesium and zinc on structure of foamed aluminum castings
von: A. A. Yablonskyi
Veröffentlicht: (2011)

Rational casting technologies of the economically reinforced matrix-aluminum composite preforms
von: A. S. Zatulovskij, et al.
Veröffentlicht: (2015)

The calculation of the law regulation for electromagnetic filling
von: V. N. Fikssen
Veröffentlicht: (2016)

Conditions for obtaining alloys with the structure of a frozen microemulsion and MHD-technology for copper melt with ultradisperse drops bazed on FeCrC
von: V. I. Dubodelov, et al.
Veröffentlicht: (2018)

Obtaining Castings in Low-pressure Casting Using Multiple Metal Wires
von: T. V. Lysenko, et al.
Veröffentlicht: (2020)