The change of the coercive force under fatigue testing of 40X steel specimens
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | K. V. Vakulenko, I. B. Kazak, Ja. Bezljudko, V. G. Jareshchenko, E. I. Elkina |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2015
|
| Назва видання: | Journal of mechanical engineering |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000421704 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
The change of the coercive force under fatigue testing of 40X steel specimens
за авторством: Вакуленко, К. В., та інші
Опубліковано: (2015)
за авторством: Вакуленко, К. В., та інші
Опубліковано: (2015)
The change of the coercive force under fatigue testing of 40X steel specimens
за авторством: Вакуленко, К. В., та інші
Опубліковано: (2015)
за авторством: Вакуленко, К. В., та інші
Опубліковано: (2015)
Fatigue life of specimens from 40KH steel after wear-resistant
за авторством: V. V. Knysh, та інші
Опубліковано: (2021)
за авторством: V. V. Knysh, та інші
Опубліковано: (2021)
Application of coercive force for assessment of technical condition of structures operating under pressure
за авторством: V. A. Nekhotjashchij, та інші
Опубліковано: (2010)
за авторством: V. A. Nekhotjashchij, та інші
Опубліковано: (2010)
Fatigue life of steel specimens 40KH after wear-resistant surfacing with a sublayer of low-carbon steel
за авторством: I. O. Riabtsev, та інші
Опубліковано: (2021)
за авторством: I. O. Riabtsev, та інші
Опубліковано: (2021)
Damage parameter estimation of the dual ferrite martensite steel on coercive force
за авторством: Usov, V.V., та інші
Опубліковано: (2018)
за авторством: Usov, V.V., та інші
Опубліковано: (2018)
The influence of ion nitriding modes on fretting-fatigue of 40X steel
за авторством: P. V. Kaplun, та інші
Опубліковано: (2018)
за авторством: P. V. Kaplun, та інші
Опубліковано: (2018)
Fatigue properties of notched specimens made of FeP04 steel
за авторством: Rozumek, D., та інші
Опубліковано: (2011)
за авторством: Rozumek, D., та інші
Опубліковано: (2011)
Fatigue properties of notched specimens made of FeP04 steel
за авторством: D. Rozumek, та інші
Опубліковано: (2011)
за авторством: D. Rozumek, та інші
Опубліковано: (2011)
Coercive force of double layer ferromagnetic materials
за авторством: V. H. Rybachuk, та інші
Опубліковано: (2021)
за авторством: V. H. Rybachuk, та інші
Опубліковано: (2021)
Diagnosis of damage in austenitic steel AISI 304 at mechanical loading by measurements of coercive force
за авторством: O. P. Hopkalo, та інші
Опубліковано: (2019)
за авторством: O. P. Hopkalo, та інші
Опубліковано: (2019)
Diagnosis of damage to ferromagnetic steels during mechanical loading by results of measurements of coercive force
за авторством: O. P. Hopkalo, та інші
Опубліковано: (2020)
за авторством: O. P. Hopkalo, та інші
Опубліковано: (2020)
Control of metal fatigue by a non-destructive magnetic (coercimetric) method as an objective basis for diagnostics of equipment and structures
за авторством: Ja. Bezljudko, та інші
Опубліковано: (2009)
за авторством: Ja. Bezljudko, та інші
Опубліковано: (2009)
Grain size and correlation of strength, plasticity and toughness properties with coercive force of steels with ferrito-pearlitic structure
за авторством: G. V. Bida
Опубліковано: (2010)
за авторством: G. V. Bida
Опубліковано: (2010)
Determination of steel grade of rods using "SILA" coercive force meter
за авторством: A. B. Maksimov
Опубліковано: (2013)
за авторством: A. B. Maksimov
Опубліковано: (2013)
Non-destructive testing of quality of metal products using "SILA" coercive force meter
за авторством: A. B. Maksimov
Опубліковано: (2014)
за авторством: A. B. Maksimov
Опубліковано: (2014)
Express evaluation of the quality of producing caterpillar tracks by the results of coercive force measurement
за авторством: O. P. Hopkalo, та інші
Опубліковано: (2022)
за авторством: O. P. Hopkalo, та інші
Опубліковано: (2022)
Methods and specimens for comparative studies of fatigue resistance of parts with multilayer surfacing
за авторством: I. A. Rjabtsev, та інші
Опубліковано: (2019)
за авторством: I. A. Rjabtsev, та інші
Опубліковано: (2019)
Evaluation of the effect of pearlite dispersion on carbon steel fatigue
за авторством: Kh. A. Askerov, та інші
Опубліковано: (2020)
за авторством: Kh. A. Askerov, та інші
Опубліковано: (2020)
Influence of plastic deformation on the structure, mechanical properties and coercive force of metal of oxygen bottles
за авторством: L. M. Lobanov, та інші
Опубліковано: (2011)
за авторством: L. M. Lobanov, та інші
Опубліковано: (2011)
A specimen for fatigue thresholds determination under cyclic transverse shear
за авторством: O. P. Datsyshyn, та інші
Опубліковано: (2019)
за авторством: O. P. Datsyshyn, та інші
Опубліковано: (2019)
Surface strengthening of 40X steel by electric spark alloying
за авторством: S. I. Kryshtopa, та інші
Опубліковано: (2017)
за авторством: S. I. Kryshtopa, та інші
Опубліковано: (2017)
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
за авторством: Zhao, L.H., та інші
Опубліковано: (2018)
за авторством: Zhao, L.H., та інші
Опубліковано: (2018)
Diagnosis of damage to caterpillar tracks under mechanical loading based on the results of measurements of the coercive force
за авторством: O. P. Hopkalo, та інші
Опубліковано: (2021)
за авторством: O. P. Hopkalo, та інші
Опубліковано: (2021)
Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
за авторством: Major, S., та інші
Опубліковано: (2008)
за авторством: Major, S., та інші
Опубліковано: (2008)
The influence of deformation mode on force conditions of formation of the surface nanostructure of 40Kh steel
за авторством: V. I. Kyryliv, та інші
Опубліковано: (2021)
за авторством: V. I. Kyryliv, та інші
Опубліковано: (2021)
Monte Carlo calculation of the coercive force and phase transitions in the ensemble of Stoner–Wohlfarth particles with exchange interaction
за авторством: V. M. Kalita, та інші
Опубліковано: (2017)
за авторством: V. M. Kalita, та інші
Опубліковано: (2017)
Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
за авторством: Jameel, Azher, та інші
Опубліковано: (2016)
за авторством: Jameel, Azher, та інші
Опубліковано: (2016)
Evaluation of hydrogen influence on mechanical properties of 40X steel
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2014)
за авторством: Ya. L. Ivanytskyi, та інші
Опубліковано: (2014)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
за авторством: V. M. Matsevityj, та інші
Опубліковано: (2014)
за авторством: V. M. Matsevityj, та інші
Опубліковано: (2014)
Wear-fatigue test methods and their significance
за авторством: Bahdanovich, A.V., та інші
Опубліковано: (2009)
за авторством: Bahdanovich, A.V., та інші
Опубліковано: (2009)
Friction welding of heat-resistant steel, produced by the powder injection moulding technology, with steel 40X
за авторством: I. V. Zjakhor, та інші
Опубліковано: (2012)
за авторством: I. V. Zjakhor, та інші
Опубліковано: (2012)
Evaluation of the kinetics of fatigue fracture by automated analysis of the deformation relief on the surface of specimen with a central hole
за авторством: P. O. Marushchak, та інші
Опубліковано: (2014)
за авторством: P. O. Marushchak, та інші
Опубліковано: (2014)
Influence of notch radius on fatigue crack propagation in beam specimens of 2017A-T4 alloy
за авторством: D. Rozumek, та інші
Опубліковано: (2017)
за авторством: D. Rozumek, та інші
Опубліковано: (2017)
Influence of electrical discharge shock wave on the fatigue characteristics of thermally strengthened steel
за авторством: I. O. Vakulenko, та інші
Опубліковано: (2018)
за авторством: I. O. Vakulenko, та інші
Опубліковано: (2018)
Specifics of formation of electromagnetic field by a crack of fatigue origin at eddy current testing
за авторством: Ja. Teterko, та інші
Опубліковано: (2016)
за авторством: Ja. Teterko, та інші
Опубліковано: (2016)
Influence of the mode of deformation and hydrogenation on mechanical properties of 40X steel with surface nanostructure
за авторством: V. I. Kyryliv, та інші
Опубліковано: (2024)
за авторством: V. I. Kyryliv, та інші
Опубліковано: (2024)
Diagnostics of the structural-mechanical state of steam pipeline steels by coercive-metric method and prediction of their life time
за авторством: O. P. Ostash, та інші
Опубліковано: (2013)
за авторством: O. P. Ostash, та інші
Опубліковано: (2013)
On solvability of the variational inequality with +-coercive multivalued mappings
за авторством: Solonoukha, O.V.
Опубліковано: (1999)
за авторством: Solonoukha, O.V.
Опубліковано: (1999)
Determination of Mechanical Properties of Aged NPP Components Using Instrumented Hardness Testing and Other Miniature Specimen Testing Techniques
за авторством: G. B. Lenkey, та інші
Опубліковано: (2013)
за авторством: G. B. Lenkey, та інші
Опубліковано: (2013)
Схожі ресурси
-
The change of the coercive force under fatigue testing of 40X steel specimens
за авторством: Вакуленко, К. В., та інші
Опубліковано: (2015) -
The change of the coercive force under fatigue testing of 40X steel specimens
за авторством: Вакуленко, К. В., та інші
Опубліковано: (2015) -
Fatigue life of specimens from 40KH steel after wear-resistant
за авторством: V. V. Knysh, та інші
Опубліковано: (2021) -
Application of coercive force for assessment of technical condition of structures operating under pressure
за авторством: V. A. Nekhotjashchij, та інші
Опубліковано: (2010) -
Fatigue life of steel specimens 40KH after wear-resistant surfacing with a sublayer of low-carbon steel
за авторством: I. O. Riabtsev, та інші
Опубліковано: (2021)