Cover Image

Influence of nonmetallics on formation of pores during hot rolling of bearing steel

Saved in:

Bibliographic Details
Date:	2015
Main Authors:	O. M. Moroz, O. A. Hlotka
Format:	Article
Language:	English
Published:	2015
Series:	Metal Science and Treatment of Metals
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000429549
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
by: S. E. Kondratiuk, et al.
Published: (2016)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
by: A. M. Nesterenko, et al.
Published: (2009)

Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
by: T. N. Golubenko, et al.
Published: (2012)

Effect of modification on the formation of nonmetallic inclusions in kp-t wheel steel
by: S. Polishko
Published: (2017)

Effect of modification on the formation of nonmetallic inclusions in KP-T wheel steel
by: Polishko, S.
Published: (2017)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
by: Ju. Prikhodko, et al.
Published: (2013)

Preparation of the surface of hot-rolled strips for hot-dip galvanized
by: V. G. Ivanchenko
Published: (2014)

Physical model of W and Ti compound during hot vacuum rolling in the solid phase
by: Andrieieva, O.L., et al.
Published: (2023)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
by: L. K. Leshchynskyi, et al.
Published: (2021)

Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products
by: V. H. Razdobrieiev, et al.
Published: (2019)

Peculiarities of formation of joints between dissimilar metals in vacuum hot roll welding
by: I. M. Nekljudov, et al.
Published: (2011)

Mechanisms of structure formation in hot-rolled boiler tubes during their production from non-deformed continuously cast billets
by: L. V. Opryshko, et al.
Published: (2015)

The influence of distribution of carbides wear on 110Kh18M-ShD (440S) steel
by: O. A. Hlotka, et al.
Published: (2017)

Training hot rolled strips and sheets of especially thin
by: V. S. Panchenko, et al.
Published: (2014)

Formation of compounds of dissimilar metals in a solid phase by the method of hot rolling in vacuum
by: B. V. Borts
Published: (2011)

Specific features of structure formation during sintering of carbide-steel with binder based on sludge of roller-bearing steel
by: G. A. Bagljuk, et al.
Published: (2014)

Physical modeling of floating of the nonmetallic inclusions in steel-teeming ladles of small capacity
by: A. S. Lantukh, et al.
Published: (2018)

A new type of corrosion-active nonmetallic inclusions and their influence on 38KhN3MFA steel corrosion
by: M. S. Khoma, et al.
Published: (2019)

Rheological properties of steel at roll casting-rolling
by: O. V. Nohovitsyn, et al.
Published: (2014)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
by: Makeeva, A.S., et al.
Published: (2016)

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
by: V. H. Razdobrieiev, et al.
Published: (2022)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
by: A. S. Makeeva, et al.
Published: (2016)

Glasses on the basis of sand and nonmetallic minerals
by: H. F. Horbachev, et al.
Published: (2010)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
by: S. V. Bobyr, et al.
Published: (2017)

Pecularities of electron beam welding of hot-rolled aluminum-lithium alloys
by: D. Drimal, et al.
Published: (2019)

Calculation model of formation of nonmetallic inclusions of multilayer morphology in weld metal
by: L. A. Taraborkin, et al.
Published: (2018)

The estimation method to determine the influence of the factors in hot-rolled metal production technology on the stability of the mechanical properties
by: S. A. Vorobej, et al.
Published: (2017)

Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680
by: Ju. Prikhodko, et al.
Published: (2019)

Stochastic dynamic model of signals of roll bearing vibration and their analysis
by: I. Y. Matsko, et al.
Published: (2013)

Account for pore formation in heat treatment of welded elements of steels, prone to initiation of temper cracks
by: V. I. Makhnenko, et al.
Published: (2013)

Features of structure and properties of hot-rolled boiler tubes produced from non-deformed continuously cast billets of carbon steel
by: L. V. Opryshko, et al.
Published: (2012)

Influence of Copper Pretreatment on the Phase and Pore Formations in the Solid Phase Reactions of Copper with Tin
by: Morozovych, V.V., et al.
Published: (2018)

The relationship between microstructure and fracture parameters when the drop weight tear test of hot rolling low carbon microalloyed linepipe steel
by: I. F. Pemov, et al.
Published: (2012)

Instrumental stamp steels for hot deformation (review)
by: K. O. Hohaiev, et al.
Published: (2016)

The influence of concentration of elements and pores on dielectric losses
by: M. V. Dmitriev
Published: (1998)

Improved hot pilger tube rolling by controlling the clearance between the sleeve and the dorn
by: V. F. Balakin, et al.
Published: (2015)

Improvement of the technology of producing extended composite transition pieces of Steel 20 - Steel 08KH18N10T made by the method of hot screw rolling in vacuum
by: B. V. Borts, et al.
Published: (2017)

Generalization of research results on the dynamics of continuous wide-strip hot-rolling mills
by: V. V. Verenev
Published: (2018)

Development and investigation of end-to-end technology of bearing steel melting for electroslag remelting and production of section rolled metal of large profile sizes
by: V. N. Kornievskij, et al.
Published: (2016)

Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
by: Ju. Gridin, et al.
Published: (2013)