Buchumschlag

Influence of nonmetallics on formation of pores during hot rolling of bearing steel

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
Hauptverfasser:	O. M. Moroz, O. A. Hlotka
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2015
Schriftenreihe:	Metal Science and Treatment of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000429549
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
von: S. E. Kondratiuk, et al.
Veröffentlicht: (2016)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009)

Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
von: T. N. Golubenko, et al.
Veröffentlicht: (2012)

Effect of modification on the formation of nonmetallic inclusions in KP-T wheel steel
von: Polishko, S.
Veröffentlicht: (2017)

Effect of modification on the formation of nonmetallic inclusions in kp-t wheel steel
von: S. Polishko
Veröffentlicht: (2017)

Process and property of hot-rolled stainless steel/carbon steel cladding bar
von: Zhining Jia, et al.
Veröffentlicht: (2016)

Hot-cracking of high-alloyed steels evaluated by wedge rolling test
von: Schindler, I., et al.
Veröffentlicht: (2008)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
von: Ju. Prikhodko, et al.
Veröffentlicht: (2013)

Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
von: Guan, B., et al.
Veröffentlicht: (2018)

Preparation of the surface of hot-rolled strips for hot-dip galvanized
von: V. G. Ivanchenko
Veröffentlicht: (2014)

Physical model of W and Ti compound during hot vacuum rolling in the solid phase
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)

Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2019)

Peculiarities of formation of joints between dissimilar metals in vacuum hot roll welding
von: I. M. Nekljudov, et al.
Veröffentlicht: (2011)

Mechanisms of structure formation in hot-rolled boiler tubes during their production from non-deformed continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2015)

The influence of distribution of carbides wear on 110Kh18M-ShD (440S) steel
von: O. A. Hlotka, et al.
Veröffentlicht: (2017)

Specific features of structure formation during sintering of carbide-steel with binder based on sludge of roller-bearing steel
von: G. A. Bagljuk, et al.
Veröffentlicht: (2014)

Training hot rolled strips and sheets of especially thin
von: V. S. Panchenko, et al.
Veröffentlicht: (2014)

Formation of compounds of dissimilar metals in a solid phase by the method of hot rolling in vacuum
von: B. V. Borts
Veröffentlicht: (2011)

Rheological properties of steel at roll casting-rolling
von: O. V. Nohovitsyn, et al.
Veröffentlicht: (2014)

Physical modeling of floating of the nonmetallic inclusions in steel-teeming ladles of small capacity
von: A. S. Lantukh, et al.
Veröffentlicht: (2018)

A new type of corrosion-active nonmetallic inclusions and their influence on 38KhN3MFA steel corrosion
von: M. S. Khoma, et al.
Veröffentlicht: (2019)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
von: S. V. Bobyr, et al.
Veröffentlicht: (2017)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
von: Makeeva, A.S., et al.
Veröffentlicht: (2016)

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
von: A. S. Makeeva, et al.
Veröffentlicht: (2016)

Glasses on the basis of sand and nonmetallic minerals
von: H. F. Horbachev, et al.
Veröffentlicht: (2010)

Calculation model of formation of nonmetallic inclusions of multilayer morphology in weld metal
von: L. A. Taraborkin, et al.
Veröffentlicht: (2018)

The estimation method to determine the influence of the factors in hot-rolled metal production technology on the stability of the mechanical properties
von: S. A. Vorobej, et al.
Veröffentlicht: (2017)

Stochastic dynamic model of signals of roll bearing vibration and their analysis
von: I. Y. Matsko, et al.
Veröffentlicht: (2013)

Pecularities of electron beam welding of hot-rolled aluminum-lithium alloys
von: D. Drimal, et al.
Veröffentlicht: (2019)

Account for pore formation in heat treatment of welded elements of steels, prone to initiation of temper cracks
von: V. I. Makhnenko, et al.
Veröffentlicht: (2013)

Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680
von: Ju. Prikhodko, et al.
Veröffentlicht: (2019)

Influence of Copper Pretreatment on the Phase and Pore Formations in the Solid Phase Reactions of Copper with Tin
von: Morozovych, V.V., et al.
Veröffentlicht: (2018)

Instrumental stamp steels for hot deformation (review)
von: K. O. Hohaiev, et al.
Veröffentlicht: (2016)

Features of structure and properties of hot-rolled boiler tubes produced from non-deformed continuously cast billets of carbon steel
von: L. V. Opryshko, et al.
Veröffentlicht: (2012)

The relationship between microstructure and fracture parameters when the drop weight tear test of hot rolling low carbon microalloyed linepipe steel
von: I. F. Pemov, et al.
Veröffentlicht: (2012)

Improvement of the technology of producing extended composite transition pieces of Steel 20 - Steel 08KH18N10T made by the method of hot screw rolling in vacuum
von: B. V. Borts, et al.
Veröffentlicht: (2017)

Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
von: Ju. Gridin, et al.
Veröffentlicht: (2013)

The influence of concentration of elements and pores on dielectric losses
von: M. V. Dmitriev
Veröffentlicht: (1998)