The dynamics of freeing of the synthetic immunostimulator methyluracilum from a polymeric composition intended for the implantation in vitro
Gespeichert in:
| Datum: | 2015 |
|---|---|
| Hauptverfasser: | D. V. Kuliesh, Yu. Nechaieva, N. A. Halatenko |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2015
|
| Schriftenreihe: | Reports of the National Academy of Sciences of Ukraine |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000462394 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Epoxy polyurethane composites filled with polyhydroxybutyrate and doxorubicin for the manufacture of bone implants
von: S. A. Lukashevych, et al.
Veröffentlicht: (2015)
von: S. A. Lukashevych, et al.
Veröffentlicht: (2015)
Dynamic mechanical properties and structure of epoxy-silica composites of cationic polymerization
von: N. H. Leonova, et al.
Veröffentlicht: (2014)
von: N. H. Leonova, et al.
Veröffentlicht: (2014)
Wear resistance research of the new composition materials made of alumina intended for specific tribotechnical application
von: L. B. Pryimak, et al.
Veröffentlicht: (2022)
von: L. B. Pryimak, et al.
Veröffentlicht: (2022)
Experimental investigation of the liquid outflow process from centrifugal atomizers intended for cooling towers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2001)
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2001)
Development and research of polymeric composite materials of medical purpose with ifosfamide on the basis of polyurethanes with isocianurate fragments
von: I. I. Hladyr, et al.
Veröffentlicht: (2020)
von: I. I. Hladyr, et al.
Veröffentlicht: (2020)
Development of the ceramic implants construction based zirconia composite. 1. Dental implants
von: V. V. Lashneva, et al.
Veröffentlicht: (2014)
von: V. V. Lashneva, et al.
Veröffentlicht: (2014)
Composite materials formation for orthopaedic implants
von: Avilov, A.M., et al.
Veröffentlicht: (2004)
von: Avilov, A.M., et al.
Veröffentlicht: (2004)
Studying polymeric composite absorber for solar collectors
von: T. V. Surzhyk
Veröffentlicht: (2015)
von: T. V. Surzhyk
Veröffentlicht: (2015)
Polymeric compositions having near IR photoconduction
von: Davidenko, N.A., et al.
Veröffentlicht: (2004)
von: Davidenko, N.A., et al.
Veröffentlicht: (2004)
Influence of modification on the characteristics of reinforcing steels intended for reinforced concrete structures
von: S. O. Polishko
Veröffentlicht: (2023)
von: S. O. Polishko
Veröffentlicht: (2023)
Determination of oxides intended for surface modification of diamond grains by their functional characteristics
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2020)
von: V. I. Lavrinenko, et al.
Veröffentlicht: (2020)
Unsaturated esters and polymeric materials on their basis of medical applications
von: T. V. Rudenchyk, et al.
Veröffentlicht: (2018)
von: T. V. Rudenchyk, et al.
Veröffentlicht: (2018)
Household buildings of peasant`s courtyard at Pokuttia: buildings intended for storage of agricultural products
von: R. Radovych
Veröffentlicht: (2018)
von: R. Radovych
Veröffentlicht: (2018)
The general military music XVII–XVIII century: the history, structure and function intend
von: L. I. Horenko
Veröffentlicht: (2014)
von: L. I. Horenko
Veröffentlicht: (2014)
Slay polymer composites with long induction period of polymerization
von: Yu. H. Fedorenko, et al.
Veröffentlicht: (2015)
von: Yu. H. Fedorenko, et al.
Veröffentlicht: (2015)
Physicochemical properties of the rubber compositions, vulcanized by polymeric sulfur
von: Z. O. Znak, et al.
Veröffentlicht: (2016)
von: Z. O. Znak, et al.
Veröffentlicht: (2016)
The Analysis of Pyrolysis Products Composition of Domestic Polymeric Wastes
von: E. V. Lysenko, et al.
Veröffentlicht: (2011)
von: E. V. Lysenko, et al.
Veröffentlicht: (2011)
Scattering from ramified polymeric systems
von: Benhamou, M., et al.
Veröffentlicht: (2004)
von: Benhamou, M., et al.
Veröffentlicht: (2004)
Co-crystallization of filamentous and globular carbon on diamond and cBN during production of composite abrasive thermostable powders intended for grinding tools
von: V. G. Poltoratskij
Veröffentlicht: (2019)
von: V. G. Poltoratskij
Veröffentlicht: (2019)
The development of an integrated criterion for the rational selection of polymeric composite materials
von: A. V. Gajdachuk, et al.
Veröffentlicht: (2019)
von: A. V. Gajdachuk, et al.
Veröffentlicht: (2019)
Epoxy-titania composites of cationic polymerization: synthesis conditions and properties
von: S. V. Zhyltsova, et al.
Veröffentlicht: (2015)
von: S. V. Zhyltsova, et al.
Veröffentlicht: (2015)
Polymeric and composite materials for proton conductive membranes of fuel cells
von: Yu. Yevchuk, et al.
Veröffentlicht: (2016)
von: Yu. Yevchuk, et al.
Veröffentlicht: (2016)
Antineoplastic activity in vitro of 2-amino-5-benzylthiazole derivative in complex with nanoscale polymeric carriers
von: N. S. Finiuk, et al.
Veröffentlicht: (2021)
von: N. S. Finiuk, et al.
Veröffentlicht: (2021)
Implantation of deuterium and helium ions into composite structure with tantalum coating
von: Bobkov, V.V., et al.
Veröffentlicht: (2018)
von: Bobkov, V.V., et al.
Veröffentlicht: (2018)
Influence of ion implantation and annealing on composition and structure of GaAs surface
von: Normuradov, M.T., et al.
Veröffentlicht: (2002)
von: Normuradov, M.T., et al.
Veröffentlicht: (2002)
Development and researches of a biological active polymeric material with immobilized Vincristine
von: I. B. Demchenko, et al.
Veröffentlicht: (2014)
von: I. B. Demchenko, et al.
Veröffentlicht: (2014)
Hybrid-integrated version of SBD amplitude detector intended for the 400-600 GHz frequency range
von: A. V. Zorenko, et al.
Veröffentlicht: (2014)
von: A. V. Zorenko, et al.
Veröffentlicht: (2014)
Changes of the molecular profile of implantation in women in the cycles of in vitro fertilization in the development of ovarian hyperstemulation syndrome
von: O. M. Nosenko, et al.
Veröffentlicht: (2018)
von: O. M. Nosenko, et al.
Veröffentlicht: (2018)
To the question of activating preparation of basaltic fibres as reinforcing fillers of polymeric composites
von: Ya. Kuzmenko, et al.
Veröffentlicht: (2022)
von: Ya. Kuzmenko, et al.
Veröffentlicht: (2022)
Electrodialytic fractionation of tritium in water solution assisted with polymeric and composite membranes
von: O. V. Zubko, et al.
Veröffentlicht: (2014)
von: O. V. Zubko, et al.
Veröffentlicht: (2014)
Determination of the Safe Levels of Static Loads for Polymeric Composites Weakened by Cracks
von: A. A. Kaminskij, et al.
Veröffentlicht: (2018)
von: A. A. Kaminskij, et al.
Veröffentlicht: (2018)
Polymeric composites based on secondary polyethylene and high dispersed rubber crumb
von: V. D. Myshak, et al.
Veröffentlicht: (2013)
von: V. D. Myshak, et al.
Veröffentlicht: (2013)
POLYMERIC COMPOSITE ELECTROLYTE BASED ON NASICON FOR SOLID-STATE LITHIUM BATTERIES
von: Yefimishch, Iryna, et al.
Veröffentlicht: (2025)
von: Yefimishch, Iryna, et al.
Veröffentlicht: (2025)
The evaluation of biocompatibility and biological activity of composite materials with folate-derivative of ferrocene for medicine
von: N. A. Halatenko, et al.
Veröffentlicht: (2016)
von: N. A. Halatenko, et al.
Veröffentlicht: (2016)
COMPOSITES OF CALCIUM PHOSPHATE AND ZIRCONIUM DIOXIDE AS BIOCOMPATIBLE COATINGS OF METAL IMPLANTS
von: Zatovsky, Іgor, et al.
Veröffentlicht: (2024)
von: Zatovsky, Іgor, et al.
Veröffentlicht: (2024)
The free proline contents of the sunflower tissues throughout the morphogenesis in vitro
von: L. E. Sergeeva, et al.
Veröffentlicht: (2013)
von: L. E. Sergeeva, et al.
Veröffentlicht: (2013)
Physical and chemical properties of synthetic diamonds, which are plated composite coating
von: E. A. Pashchenko, et al.
Veröffentlicht: (2016)
von: E. A. Pashchenko, et al.
Veröffentlicht: (2016)
Application of a composite sorbent based on natural and synthetic zeolites for cesium ion elimination from water solutions
von: Yu. Lonin, et al.
Veröffentlicht: (2014)
von: Yu. Lonin, et al.
Veröffentlicht: (2014)
Antimicrobial polymeric composition based on polyamide 12 and poly(hexamethylene)guanidine dibutylphosphate
von: S. P. Rohalskyi, et al.
Veröffentlicht: (2012)
von: S. P. Rohalskyi, et al.
Veröffentlicht: (2012)
How Much Synthetic is the Ukrainian Synthetic Future Tense?
von: A. I. Danylenko
Veröffentlicht: (2010)
von: A. I. Danylenko
Veröffentlicht: (2010)
Ähnliche Einträge
-
Epoxy polyurethane composites filled with polyhydroxybutyrate and doxorubicin for the manufacture of bone implants
von: S. A. Lukashevych, et al.
Veröffentlicht: (2015) -
Dynamic mechanical properties and structure of epoxy-silica composites of cationic polymerization
von: N. H. Leonova, et al.
Veröffentlicht: (2014) -
Wear resistance research of the new composition materials made of alumina intended for specific tribotechnical application
von: L. B. Pryimak, et al.
Veröffentlicht: (2022) -
Experimental investigation of the liquid outflow process from centrifugal atomizers intended for cooling towers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2001) -
Development and research of polymeric composite materials of medical purpose with ifosfamide on the basis of polyurethanes with isocianurate fragments
von: I. I. Hladyr, et al.
Veröffentlicht: (2020)