Experience of introduction of the technology of reconstructive microplasma powder surfacing in repair of high pressure turbine blades in batch production
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | P. D. Zhemanjuk, I. A. Petrik, S. L. Chigilejchik |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2015
|
| Назва видання: | Automatic Welding |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000468437 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Peculiarities of control of bead shape in single-layer microplasma surfacing on blade edges of aircraft FTE
за авторством: P. D. Zhemanjuk, та інші
Опубліковано: (2016)
за авторством: P. D. Zhemanjuk, та інші
Опубліковано: (2016)
Development of the technology for microplasma powder cladding of flange platform faces of blades of highpressure turbine aircraft engine
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2010)
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2010)
Results of implementation of orbital welding in manufacture and repair of thin-wall pipelines
за авторством: P. D. Zhemanjuk, та інші
Опубліковано: (2017)
за авторством: P. D. Zhemanjuk, та інші
Опубліковано: (2017)
Vibrational Stresses of Damaged Steam Turbine Blades After Renovation Repair
за авторством: Шульженко, Н. Г., та інші
Опубліковано: (2021)
за авторством: Шульженко, Н. Г., та інші
Опубліковано: (2021)
Vibrational Stresses of Damaged Steam Turbine Blades After Renovation Repair
за авторством: Шульженко, Н. Г., та інші
Опубліковано: (2021)
за авторством: Шульженко, Н. Г., та інші
Опубліковано: (2021)
Vibrational Stresses of Damaged Steam Turbine Blades After Renovation Repair
за авторством: M. H. Shulzhenko, та інші
Опубліковано: (2021)
за авторством: M. H. Shulzhenko, та інші
Опубліковано: (2021)
Repair of large-size blades of fan of gasturbine engine
за авторством: I. B. Markov, та інші
Опубліковано: (2018)
за авторством: I. B. Markov, та інші
Опубліковано: (2018)
Highcyclic fatigue of the material for turbine rotor blades of gtebefore and after repair by welding
за авторством: Ju. S. Nalimov, та інші
Опубліковано: (2009)
за авторством: Ju. S. Nalimov, та інші
Опубліковано: (2009)
Development of the technology of reconditioning the sealing element of nozzle blades from difficult-to-weld high-temperature nickel alloy of ZHS6 type by microplasma powder surfacing
за авторством: K. A. Yushchenko, та інші
Опубліковано: (2020)
за авторством: K. A. Yushchenko, та інші
Опубліковано: (2020)
Energy approach in analysis of microplasma powder surfacing modes
за авторством: A. V. Jarovitsyn
Опубліковано: (2015)
за авторством: A. V. Jarovitsyn
Опубліковано: (2015)
Features of a low-ampere argon-arc and microplasma powder cladding on a narrow substrate
за авторством: A. V. Jarovitsyn, та інші
Опубліковано: (2009)
за авторством: A. V. Jarovitsyn, та інші
Опубліковано: (2009)
Some ways of decreasing the losses of filler powder in microplasma surfacing
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2013)
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2013)
Steam Turbine Low Pressure Cylinder Last Stage by the Blades Spatial Profiling
за авторством: Rusanov, Andrii V., та інші
Опубліковано: (2020)
за авторством: Rusanov, Andrii V., та інші
Опубліковано: (2020)
Steam Turbine Low Pressure Cylinder Last Stage by the Blades Spatial Profiling
за авторством: Rusanov, Andrii V., та інші
Опубліковано: (2020)
за авторством: Rusanov, Andrii V., та інші
Опубліковано: (2020)
Strength of Lock Joint of Turbine Blades under High Temperatures
за авторством: M. H. Shulzhenko, та інші
Опубліковано: (2023)
за авторством: M. H. Shulzhenko, та інші
Опубліковано: (2023)
Simulation of the Erosion-Corrosion Destruction Process of Steam Turbine Low-Pressure Cylinder Blades
за авторством: O. L. Shubenko, та інші
Опубліковано: (2023)
за авторством: O. L. Shubenko, та інші
Опубліковано: (2023)
Simulation of the Erosion-Corrosion Destruction Process of Steam Turbine Low-Pressure Cylinder Blades
за авторством: Шубенко, О. Л., та інші
Опубліковано: (2023)
за авторством: Шубенко, О. Л., та інші
Опубліковано: (2023)
Simulation of the Erosion-Corrosion Destruction Process of Steam Turbine Low-Pressure Cylinder Blades
за авторством: Шубенко, О. Л., та інші
Опубліковано: (2023)
за авторством: Шубенко, О. Л., та інші
Опубліковано: (2023)
Features of organization of film cooling of high temperature gas turbines blades
за авторством: A. A. Khalatov, та інші
Опубліковано: (2017)
за авторством: A. A. Khalatov, та інші
Опубліковано: (2017)
Combined laser-microplasma surfacing using powders of the Ni–Cr–B–Si system
за авторством: Ju. S. Borisov, та інші
Опубліковано: (2012)
за авторством: Ju. S. Borisov, та інші
Опубліковано: (2012)
Investigation of electrical and thermal characteristics of plasmotron for microplasma spraying of coatings from powder materials
за авторством: Ju. S. Borisov, та інші
Опубліковано: (2019)
за авторством: Ju. S. Borisov, та інші
Опубліковано: (2019)
Formation of multicomponent multilayer heat-resistant coatings on turbine blades With ion magnetron
за авторством: V. V. Kolesnik, та інші
Опубліковано: (2003)
за авторством: V. V. Kolesnik, та інші
Опубліковано: (2003)
The Efficiency Increase of the Steam Turbine Low Pressure Cylinder Last Stage by the Blades Spatial Profiling
за авторством: A. V. Rusanov, та інші
Опубліковано: (2020)
за авторством: A. V. Rusanov, та інші
Опубліковано: (2020)
Darrieus wind turbine with direct controllable blades: experience creation, testing, performance optimization
за авторством: V. P. Kajan, та інші
Опубліковано: (2015)
за авторством: V. P. Kajan, та інші
Опубліковано: (2015)
Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
за авторством: Palkov, Ihor A., та інші
Опубліковано: (2019)
за авторством: Palkov, Ihor A., та інші
Опубліковано: (2019)
Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of К-500-240 Steam Turbine Medium Pressure Cylinder
за авторством: Palkov, Ihor A., та інші
Опубліковано: (2019)
за авторством: Palkov, Ihor A., та інші
Опубліковано: (2019)
Thermostressed State of the Lock Joint of Turbine Rotor Blades of the First Stage of K-500-240 Steam Turbine Medium Pressure Cylinder
за авторством: I. A. Palkov, та інші
Опубліковано: (2019)
за авторством: I. A. Palkov, та інші
Опубліковано: (2019)
Testing of gas-turbine blades engines using the accelerator of high current relativistic electrons
за авторством: Ye. Donets, та інші
Опубліковано: (2020)
за авторством: Ye. Donets, та інші
Опубліковано: (2020)
The analysis of the damage blades of gas-turbine engines
за авторством: Ju. S. Nalimov
Опубліковано: (2014)
за авторством: Ju. S. Nalimov
Опубліковано: (2014)
Technological features of laser, microplasma and hybrid laser-microplasma welding of aluminium alloys
за авторством: V. D. Sheljagin, та інші
Опубліковано: (2014)
за авторством: V. D. Sheljagin, та інші
Опубліковано: (2014)
Development of technology of mechanized arc welding in repair of main high-pressure gas pipeline
за авторством: O. I. Olejnik, та інші
Опубліковано: (2016)
за авторством: O. I. Olejnik, та інші
Опубліковано: (2016)
Selection of technology of repair welding of parts of turbine units
за авторством: A. K. Tsarjuk, та інші
Опубліковано: (2017)
за авторством: A. K. Tsarjuk, та інші
Опубліковано: (2017)
Restoration repair of elements and units of gas turbine engines
за авторством: V. M. Nesterenkov, та інші
Опубліковано: (2017)
за авторством: V. M. Nesterenkov, та інші
Опубліковано: (2017)
Investigations of the structural features of a high-temperature nickel alloy for gas turbine engine blades
за авторством: Yu. H. Kvasnytska, та інші
Опубліковано: (2023)
за авторством: Yu. H. Kvasnytska, та інші
Опубліковано: (2023)
Phase and structural stability of high-temperature corrosion resistant alloy for cast blades of gas turbines
за авторством: A. M. Verkhovliuk, та інші
Опубліковано: (2016)
за авторством: A. M. Verkhovliuk, та інші
Опубліковано: (2016)
High-pressure reorganization of the fractal pore structure in detonation nanodiamond powders
за авторством: L. A. Bulavin, та інші
Опубліковано: (2021)
за авторством: L. A. Bulavin, та інші
Опубліковано: (2021)
High-pressure reorganization of the fractal pore structure in detonation nanodiamond powders
за авторством: L. A. Bulavin, та інші
Опубліковано: (2021)
за авторством: L. A. Bulavin, та інші
Опубліковано: (2021)
Effect of energy parameters of microplasma powder surfacing modes on susceptibility of nickel alloy ZhS32 to crack formation
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2017)
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2017)
Determination of the Thermal and Stress-Strain State of the Medium-Pressure Rotor of the T-100/120-130 Turbine after Damage to the Blades
за авторством: Черноусенко, О. Ю., та інші
Опубліковано: (2024)
за авторством: Черноусенко, О. Ю., та інші
Опубліковано: (2024)
Determination of the Thermal and Stress-Strain State of the Medium-Pressure Rotor of the T-100/120-130 Turbine after Damage to the Blades
за авторством: Черноусенко, О. Ю., та інші
Опубліковано: (2024)
за авторством: Черноусенко, О. Ю., та інші
Опубліковано: (2024)
Схожі ресурси
-
Peculiarities of control of bead shape in single-layer microplasma surfacing on blade edges of aircraft FTE
за авторством: P. D. Zhemanjuk, та інші
Опубліковано: (2016) -
Development of the technology for microplasma powder cladding of flange platform faces of blades of highpressure turbine aircraft engine
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2010) -
Results of implementation of orbital welding in manufacture and repair of thin-wall pipelines
за авторством: P. D. Zhemanjuk, та інші
Опубліковано: (2017) -
Vibrational Stresses of Damaged Steam Turbine Blades After Renovation Repair
за авторством: Шульженко, Н. Г., та інші
Опубліковано: (2021) -
Vibrational Stresses of Damaged Steam Turbine Blades After Renovation Repair
за авторством: Шульженко, Н. Г., та інші
Опубліковано: (2021)