Crack initiation on pipeline inner surface in high-temperature service. Information 2. Stresses in pipe walls
Gespeichert in:
| Datum: | 2015 |
|---|---|
| Hauptverfasser: | S. A. Nedoseka, Ja. Nedoseka |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2015
|
| Schriftenreihe: | Technical diagnostics and non-destructive testing |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000468848 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Crack initiation on inner surface of pipelines at high temperatures. Information 3. Temperature and stresses in pipe wall at cooling
von: Ja. Nedoseka, et al.
Veröffentlicht: (2016)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2016)
Crack initiation on inner surface of piping at high temperatures. Information 1. Thermal load on pipe walls at starting and in service
von: S. A. Nedoseka, et al.
Veröffentlicht: (2015)
von: S. A. Nedoseka, et al.
Veröffentlicht: (2015)
Features of functioning of process pipelines at high temperatures
von: Ja. Nedoseka, et al.
Veröffentlicht: (2009)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2009)
The influence of mechanical stresses on corrosion crack growth in a pipeline wall
von: V. M. Yuzevych, et al.
Veröffentlicht: (2021)
von: V. M. Yuzevych, et al.
Veröffentlicht: (2021)
On application of AE technology at continuous monitoring of piping of power units operating at high temperature
von: B. E. Paton, et al.
Veröffentlicht: (2014)
von: B. E. Paton, et al.
Veröffentlicht: (2014)
Evaluation of energy consumed in damage initiation at fracture of materials, based on acoustic emission data
von: Ja. Nedoseka, et al.
Veröffentlicht: (2018)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2018)
ropagation of a surface crack in the wall of an oil pipe, allowing for its hydrogenation
von: D. V. Rudavskyi
Veröffentlicht: (2012)
von: D. V. Rudavskyi
Veröffentlicht: (2012)
On starting loads of equipment operating at high temperatures
von: Ja. Nedoseka, et al.
Veröffentlicht: (2012)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2012)
Investigation of AE characteristics of materials at high temperatures. Information 1. Basic procedures and testing bench
von: L. M. Lobanov, et al.
Veröffentlicht: (2009)
von: L. M. Lobanov, et al.
Veröffentlicht: (2009)
Continuous monitoring of the main gas pipelines and gas compressor units by acoustic emission method
von: Ja. Nedoseka, et al.
Veröffentlicht: (2011)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2011)
Diagnostics of hydrogen macrodelamination in the wall of pipe elbow of a natural gas transmission pipeline
von: Ye. Kharchenko, et al.
Veröffentlicht: (2015)
von: Ye. Kharchenko, et al.
Veröffentlicht: (2015)
Simulation of sensitive plate vibrations for acoustic emission transducers. Information 2
von: Ja. Nedoseka, et al.
Veröffentlicht: (2015)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2015)
Influence of local accumulation of defects on propagation of acoustic emission waves. Information 1
von: Ja. Nedoseka, et al.
Veröffentlicht: (2013)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2013)
Influence of local defect accumulation on propagation of acoustic waves in plates. Information 1
von: Ja. Nedoseka, et al.
Veröffentlicht: (2013)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2013)
Simulation of sensitive plate vibrations in the case of acoustic emission sensors. Information 1
von: Ja. Nedoseka, et al.
Veröffentlicht: (2015)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2015)
Investigation of acoustic emission characteristics of 12Kh18N10T steel at the temperature of 560° C. Information 2. Damageability and fracture prediction
von: Ja. Nedoseka, et al.
Veröffentlicht: (2014)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2014)
Long-term strength of materials operating at high temperatures, based on acoustic emission data
von: Ja. Nedoseka, et al.
Veröffentlicht: (2014)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2014)
Evaluation of serviceability of main pipeline with a local thinning of wall in arc surfacing repair
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2015)
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2015)
The Vacuub Device for Receiving Coatings on the Inner Surface of the Pipes by Magnetron Sputtering
von: V. M. Kolomiiets, et al.
Veröffentlicht: (2020)
von: V. M. Kolomiiets, et al.
Veröffentlicht: (2020)
On movement of acoustic emission waves at high speeds
von: Ja. Nedoseka, et al.
Veröffentlicht: (2013)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2013)
The influence of neutral soil environment on stress corrosion cracking of pipe steel
von: V. A. Voloshyn, et al.
Veröffentlicht: (2014)
von: V. A. Voloshyn, et al.
Veröffentlicht: (2014)
Fracture Toughness and Crack Resistance of Steam Pipeline Steel in Initial and Used States
von: Zrilic, M., et al.
Veröffentlicht: (2004)
von: Zrilic, M., et al.
Veröffentlicht: (2004)
Prediction of stress corrosion cracking of structures subjected to high-temperature creep
von: O. K. Morachkovskij, et al.
Veröffentlicht: (2010)
von: O. K. Morachkovskij, et al.
Veröffentlicht: (2010)
Influence of local defect accumulation on acoustic wave propagation in plates. Information 2
von: Ja. Nedoseka, et al.
Veröffentlicht: (2014)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2014)
Influence of local accumulation of defects on propagation of acoustic emission waves. Information 2
von: Ja. Nedoseka, et al.
Veröffentlicht: (2013)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2013)
Study of AE characteristics of materials at high temperatures. Communication 2
von: L. M. Lobanov, et al.
Veröffentlicht: (2009)
von: L. M. Lobanov, et al.
Veröffentlicht: (2009)
Modeling a circumferential crack in pipe area of a flat bottom of thick-walled pressure vessel
von: V. V. Kyrychok, et al.
Veröffentlicht: (2019)
von: V. V. Kyrychok, et al.
Veröffentlicht: (2019)
Methodological approach and criterion of the estimation of pipe steel susceptibility to stress corrosion cracking
von: L. I. Nyrkova, et al.
Veröffentlicht: (2019)
von: L. I. Nyrkova, et al.
Veröffentlicht: (2019)
Stress corrosion cracking of Kh70 pipe steel under cathode protection
von: L. I. Nyrkova
Veröffentlicht: (2020)
von: L. I. Nyrkova
Veröffentlicht: (2020)
Determination of causes of crack initiation in design elements of tower of new ventilation pipe at Chernobyl NPP
von: V. M. Torop, et al.
Veröffentlicht: (2014)
von: V. M. Torop, et al.
Veröffentlicht: (2014)
Application of coatings on inner surfaces of metallic and dielectric pipes with the use of HF -plasma source
von: Gasilin, V.V., et al.
Veröffentlicht: (2005)
von: Gasilin, V.V., et al.
Veröffentlicht: (2005)
Estimation of the periods of creep-fatigue crack initiation and growth in thin-walled structural elements
von: Ye. Andreikiv, et al.
Veröffentlicht: (2011)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2011)
The influence of residual stresses on boundary equilibrium of pipeline with an internal crack of arbitrary configuration
von: A. R. Dziubyk, et al.
Veröffentlicht: (2016)
von: A. R. Dziubyk, et al.
Veröffentlicht: (2016)
Analysis of conditions of initiation and propagation of corrosion cracks in the zone of circumferential joints of main gas pipelines
von: V. I. Makhnenko, et al.
Veröffentlicht: (2009)
von: V. I. Makhnenko, et al.
Veröffentlicht: (2009)
Determination of the period of subcritical growth of internal surface corrosive-mechanical crack in the oil pipeline pipe under turbulent flow of oil and hydro blows
von: Ye. Andreikiv, et al.
Veröffentlicht: (2017)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2017)
Acoustic emission and quantum nature of material fracture
von: Ja. Nedoseka, et al.
Veröffentlicht: (2009)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2009)
Integrated assessment of damage level and residual life of metals with certain operating life
von: S. A. Nedoseka, et al.
Veröffentlicht: (2010)
von: S. A. Nedoseka, et al.
Veröffentlicht: (2010)
On assessment of reliability of operating structures (current status and development prospects)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2010)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2010)
Features of application of acoustic emission method at destructive testing of materials
von: Ja. Nedoseka, et al.
Veröffentlicht: (2014)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2014)
coustic emission in tension of bimetal specimens
von: Ja. Nedoseka, et al.
Veröffentlicht: (2017)
von: Ja. Nedoseka, et al.
Veröffentlicht: (2017)
Ähnliche Einträge
-
Crack initiation on inner surface of pipelines at high temperatures. Information 3. Temperature and stresses in pipe wall at cooling
von: Ja. Nedoseka, et al.
Veröffentlicht: (2016) -
Crack initiation on inner surface of piping at high temperatures. Information 1. Thermal load on pipe walls at starting and in service
von: S. A. Nedoseka, et al.
Veröffentlicht: (2015) -
Features of functioning of process pipelines at high temperatures
von: Ja. Nedoseka, et al.
Veröffentlicht: (2009) -
The influence of mechanical stresses on corrosion crack growth in a pipeline wall
von: V. M. Yuzevych, et al.
Veröffentlicht: (2021) -
On application of AE technology at continuous monitoring of piping of power units operating at high temperature
von: B. E. Paton, et al.
Veröffentlicht: (2014)