Investigation of quality of restored and alloyed surface layers of copper plates in PARS
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | V. G. Kozhemjakin, V. A. Shapovalov, V. R. Burnashev, D. V. Botvinko, D. A. Birjuchenko |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
2015
|
| Назва видання: | Electrometallurgy Today |
| Онлайн доступ: | http://jnas.nbuv.gov.ua/article/UJRN-0000474154 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Репозитарії
Library portal of National Academy of Sciences of Ukraine | LibNASСхожі ресурси
Restoration of surface layer of MCCB mould copper plate by using plasma-arc technology
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015)
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015)
Alloying of surface layer of mould copper plates by the method of plasma-arc remelting
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2017)
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2017)
Strengthening the surface layer of CCM mould copper plates by hafnium with application of plasma-arc technology
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015)
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015)
Effect of technological parameters on sizes of molten metal pool in plasma-arc surfacing of copper plates of MCCB moulds
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015)
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015)
Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2014)
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2014)
Melting of copper master alloys with highly-reactive metals under conditions of plasma-arc skull melting
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2016)
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2016)
Peculiarities of recycling of high-alloy light-weight metal wastes
за авторством: D. V. Botvinko, та інші
Опубліковано: (2015)
за авторством: D. V. Botvinko, та інші
Опубліковано: (2015)
The anomalous increasing of microhardening in surface layers of aluminium alloys after the laser alloying by copper and iron
за авторством: V. V. Girzhon, та інші
Опубліковано: (2009)
за авторством: V. V. Girzhon, та інші
Опубліковано: (2009)
Formation of Aluminium Surface Layers’ Structure during Laser Alloying with Copper and Cobalt Powders
за авторством: Girzhon, V.V., та інші
Опубліковано: (2013)
за авторством: Girzhon, V.V., та інші
Опубліковано: (2013)
Application of friction stir welding method for repair and restoration of worn-out copper plates of MCCB moulds
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2015)
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2015)
Formation of Aluminium Surface Layers' Structure during Laser Alloying with Copper and Cobalt Powders
за авторством: V. V. Girzhon, та інші
Опубліковано: (2013)
за авторством: V. V. Girzhon, та інші
Опубліковано: (2013)
Investigation of temperature state of copper plate in the weld zone at friction STIR welding
за авторством: M. A. Polieshchuk, та інші
Опубліковано: (2021)
за авторством: M. A. Polieshchuk, та інші
Опубліковано: (2021)
Problems and prospects of surfacing copper and copper parts by wear-resistant layers (Review)
за авторством: A. A. Babinets, та інші
Опубліковано: (2020)
за авторством: A. A. Babinets, та інші
Опубліковано: (2020)
Electroslag surfacing of copper
за авторством: F. K. Biktagirov, та інші
Опубліковано: (2016)
за авторством: F. K. Biktagirov, та інші
Опубліковано: (2016)
Place Names with the Stem Pers-/ Pars- in Sweden
за авторством: K. M. Tyshchenko
Опубліковано: (2010)
за авторством: K. M. Tyshchenko
Опубліковано: (2010)
Restoration surfacing of parts of titanium alloy VT22
за авторством: V. P. Prilutskij, та інші
Опубліковано: (2017)
за авторством: V. P. Prilutskij, та інші
Опубліковано: (2017)
Surface-Layers' Structure of Hypoeutectic Silumin after Laser Alloying by Mixture of the Copper and Cobalt Powders
за авторством: V. V. Girzhon, та інші
Опубліковано: (2015)
за авторством: V. V. Girzhon, та інші
Опубліковано: (2015)
Plasma-arc remelting of billets compacted from chips of austenitic stainless steels
за авторством: V. R. Burnashev, та інші
Опубліковано: (2014)
за авторством: V. R. Burnashev, та інші
Опубліковано: (2014)
Plasma-powder surfacing of nickel and cobalt alloys on copper and its alloys
за авторством: E. F. Perepletchikov
Опубліковано: (2015)
за авторством: E. F. Perepletchikov
Опубліковано: (2015)
New technology of restoration and fixing of copper coolers of cooling crystallizers of CCM
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2017)
за авторством: G. M. Grigorenko, та інші
Опубліковано: (2017)
Anomalous dispersion of the surface and waveguide modes in plate of layered superconductor
за авторством: S. S. Apostolov, та інші
Опубліковано: (2017)
за авторством: S. S. Apostolov, та інші
Опубліковано: (2017)
Optimization of process of restoration surfacing and heat treatment of GTE components of alloy Inconel 738
за авторством: A. F. Beljavin, та інші
Опубліковано: (2016)
за авторством: A. F. Beljavin, та інші
Опубліковано: (2016)
The efficiency of the two-stage hydrophytic module in restoring the quality of surface and waste water
за авторством: Yu. H. Krot, та інші
Опубліковано: (2021)
за авторством: Yu. H. Krot, та інші
Опубліковано: (2021)
L'apprentissage par problemes: approche theorique et analyse d'une experience
за авторством: Gerard, V.
Опубліковано: (2005)
за авторством: Gerard, V.
Опубліковано: (2005)
Investigation of the adiabatic potential relief in single crystals with copper ions
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2014)
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2014)
Alloying of surface layer of cast billet at casting
за авторством: V. I. Tsotsko, та інші
Опубліковано: (2009)
за авторством: V. I. Tsotsko, та інші
Опубліковано: (2009)
Restoration of the structure of the discontinuity layer by tomographic methods
за авторством: O. M. Lytvyn, та інші
Опубліковано: (2019)
за авторством: O. M. Lytvyn, та інші
Опубліковано: (2019)
Restoration of end part of copper gas-oxygen chambers of arc steel-melting furnaces
за авторством: V. M. Iljushenko, та інші
Опубліковано: (2019)
за авторством: V. M. Iljushenko, та інші
Опубліковано: (2019)
The role of copper on the formation of surface friction wear resistant layers of high chrome cast iron
за авторством: V. V. Tykhonovych, та інші
Опубліковано: (2014)
за авторством: V. V. Tykhonovych, та інші
Опубліковано: (2014)
Features of surface modification of copper-based alloys under powerful plasma exposures
за авторством: Byrka, O., та інші
Опубліковано: (2018)
за авторством: Byrka, O., та інші
Опубліковано: (2018)
Copper and diamond content of the northern part of the Volyn-Podolskaya plate
за авторством: Usenko, O. V.
Опубліковано: (2011)
за авторством: Usenko, O. V.
Опубліковано: (2011)
Presence of copper and diamonds of the northern part of the Volyno-Podolian Plate
за авторством: O. V. Usenko
Опубліковано: (2011)
за авторством: O. V. Usenko
Опубліковано: (2011)
Deposition of carbon nanotubes' layer on surface of reactor alloys
за авторством: S. S. Chuprov, та інші
Опубліковано: (2012)
за авторством: S. S. Chuprov, та інші
Опубліковано: (2012)
Quality of ESR ingots, melted of electrodes pressed of chips of austenite stainless steels
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2012)
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2012)
Restoration of single crystal blades of gas turbines of high-temperature nickel alloys with surface defects and damages by surfacing
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2019)
за авторством: K. A. Jushchenko, та інші
Опубліковано: (2019)
Investigation of stability of arc of plasmatron with a deepened cathode
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2013)
за авторством: V. A. Shapovalov, та інші
Опубліковано: (2013)
Cavitation resistance of modified surface layers of alloyed steels
за авторством: V. H. Marynin
Опубліковано: (2010)
за авторством: V. H. Marynin
Опубліковано: (2010)
Calculation of parameters for hydraulic conveying by polyethylene pipes of par-ticles with substantially nonuniform density and size
за авторством: E. V. Semenenko, та інші
Опубліковано: (2013)
за авторством: E. V. Semenenko, та інші
Опубліковано: (2013)
Metals and alloys surface roughness investigation and control methods
за авторством: Ju. F. Nazarov, та інші
Опубліковано: (2007)
за авторством: Ju. F. Nazarov, та інші
Опубліковано: (2007)
Features of the structure of weld metal at restoration argon-arc surfacing of titanium alloy VT22
за авторством: S. L. Shvab, та інші
Опубліковано: (2020)
за авторством: S. L. Shvab, та інші
Опубліковано: (2020)
Схожі ресурси
-
Restoration of surface layer of MCCB mould copper plate by using plasma-arc technology
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015) -
Alloying of surface layer of mould copper plates by the method of plasma-arc remelting
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2017) -
Strengthening the surface layer of CCM mould copper plates by hafnium with application of plasma-arc technology
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015) -
Effect of technological parameters on sizes of molten metal pool in plasma-arc surfacing of copper plates of MCCB moulds
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2015) -
Causes of fracture and methods of hardening of copper plates of moulds of machines of continuous casting of billets
за авторством: V. G. Kozhemjakin, та інші
Опубліковано: (2014)