Buchumschlag

Modification of an Al – Mn alloy by Ti addition and magnetic field processing

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
Hauptverfasser:	V. I. Dubodielov, A. V. Kosynska, V. O. Seredenko, O. V. Seredenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2015
Schriftenreihe:	Metal Science and Treatment of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000523457
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Structure and wear of Al-Fe hypereutectic alloy solidified under constant magnetic field
von: V. I. Dubodielov, et al.
Veröffentlicht: (2010)

Research of grains microinhomogeneous of the aluminum with copper alloys solidified in weak constant magnetic field
von: V. O. Seredenko, et al.
Veröffentlicht: (2013)

Increase of properties of aluminum alloys by the action of a permanent magnetic field on melting at solid state
von: V. I. Dubodielov, et al.
Veröffentlicht: (2018)

Modification of a Constant in magnetic field of the Cast structure of the multicomponent alloy systems based on al-Cu-Ce at pouring, Cooling and solidification
von: E. V. Seredenko, et al.
Veröffentlicht: (2014)

Copper distribution in the Al - 3,5 % Cu alloy at imposition of constant magnetic field on the melt during its solidification
von: O. V. Seredenko
Veröffentlicht: (2012)

structure and microhardness of the al-mn alloys, with compounds of eutectic and peritectic transitions zone at chill mold casting under constant magnetic field superimposition
von: V. I. Dubodelov, et al.
Veröffentlicht: (2014)

Structure and properties of aluminum alloy with silicon and copper, processed by magnetic field during cooling and solidification
von: O. V. Seredenko
Veröffentlicht: (2014)

Influence of temperature and time melts processing on conductor aluminum alloy cast structure and constant magnetic field during its cooling
von: E. V. Seredenko
Veröffentlicht: (2017)

On the features of constant magnetic field action on aluminum alloys
von: V. I. Dubodelov, et al.
Veröffentlicht: (2018)

Action on Phases and Properties of Cast Aluminum Alloy with Copper and Silicon of Constant Magnetic Field, Supposed on a Cooling and Solidifying Melt
von: E. V. Seredenko
Veröffentlicht: (2019)

Increase of homogeneous structure of the alloy on the basis of aluminum by the impact of constant magnetic field on micro-scale disturbances in the melt flow at its casting
von: E. V. Seredenko
Veröffentlicht: (2018)

Affect of melt motion on addition dispersion in the melt volume at the beginning stage of alloying components of the monotectic system
von: V. I. Dubodelov, et al.
Veröffentlicht: (2015)

Influence of degree of dissociation of ammonia on nitriding of non-rusting steels
von: V. I. Dubodielov, et al.
Veröffentlicht: (2009)

Penetration of aluminium alloys with active elements in to the magnetodynamic furnace
von: V. O. Seredenko, et al.
Veröffentlicht: (2009)

Structure and mechanical properties of al-mg-si-mn alloys with addition of lithium
von: E. L. Prach, et al.
Veröffentlicht: (2014)

Structure forming of the aluminum alloy with hyperperitectic content of manganese and titan by constant magnetic field action on melt during its solidification
von: V. Y. Dubodelov, et al.
Veröffentlicht: (2015)

Affect of melt motion on addition dispersion in the melt volume at the beginning stage of alloying components of the monotectic system
von: V. I. Dubodelov, et al.
Veröffentlicht: (2015)

The Influence of Vanadium Addition on Hydrogen Capacity and Absorption—Desorption Kinetics of the Eutectic Ti—Zr—Mn Alloy
von: V. A. Dekhtjarenko
Veröffentlicht: (2014)

Microindusions in the structure of alloys with miscibility gap under different cooling conditions
von: V. O. Seredenko, et al.
Veröffentlicht: (2014)

Effect of the electro–hydro-pulse melt treatment on crystallization process and properties of Mg – Al – Ca – Mn – Ti magnesium alloy
von: I. M. Maksymchuk, et al.
Veröffentlicht: (2012)

Producing of intermetallic alloys of TiAl system with boron and lanthanum additions using the EBCHM method
von: N. P. Trigub, et al.
Veröffentlicht: (2011)

Kinetics of Decomposition and Thermal Stabilization of Mg—Al—Ca—Mn—Ti Cast Alloy
von: I. N. Maksimchuk, et al.
Veröffentlicht: (2014)

Martensitic transformation at formation of system of nanoparticles in a Cu–Al–Mn alloy after annealing in a magnetic field
von: A. M. Titenko, et al.
Veröffentlicht: (2014)

Structure and properties of Al – Mg alloy with additions of silicon
von: A. A. Kulinich, et al.
Veröffentlicht: (2010)

Development of new casting alloys of the system Al-Mg-Si-Mn with additions 1,0 ace. Li and 0,1 ace. Ti 0,1 ace. Zr
von: E. L. Prach, et al.
Veröffentlicht: (2014)

Structure and mechanical properties of Al-Fe-Cr alloys for elevated temperatures, reinforced by nanoquasicrystalline particles additionally alloyed by Ti, Mo and Nb
von: Ju. V. Milman, et al.
Veröffentlicht: (2014)

Peculiarities of hydrogen sorption-desorption by ternary Mg–M–Ni (M = Al, Mn, Ti) alloys
von: V. V. Berezovets, et al.
Veröffentlicht: (2013)

Research of the Influence on the Modification of Beryllium in Al–Si Alloy
von: Hren, I., et al.
Veröffentlicht: (2018)

Wire-feeding based additive manufacturing of the Ti–6Al–4V alloy. Part I. Microstructure
von: M. O. Vasylyev, et al.
Veröffentlicht: (2023)

Effect of Electric-Spark Dispergation on Magnetic and Electrical-Transport Properties of Heusler Cu—Mn—Al Alloy
von: V. M. Nadutov, et al.
Veröffentlicht: (2014)

Influence of the Laves Phase on Processes of Formation of Hydrides in the Heterophase Alloys of the Ti—Fe—Mn System
von: V. G. Ivanchenko, et al.
Veröffentlicht: (2013)

Sorption properties of eutectic alloys of the Ti – Fe – Mn system
von: V. H. Ivanchenko, et al.
Veröffentlicht: (2011)

Magnetic and thermal properties of alloys close in composition to the spin gapless semiconductor Mn2CoAl
von: A. A. Semiannikova, et al.
Veröffentlicht: (2021)

The changes in the hydrogen saturation kinetics of the Ti – Zr – Mn alloys
von: V. H. Ivanchenko, et al.
Veröffentlicht: (2010)

Wire-feeding based additive manufacturing of the Ti–6Al–4V alloy. Part II. Mechanical properties
von: M. O. Vasylyev, et al.
Veröffentlicht: (2023)

Melting behavior and heat Treatment of al-mg-si-mn casting alloy alloyed with 0,1 wt.%Ti and 0,1 wt.%zr
von: V. V. Bojko, et al.
Veröffentlicht: (2014)

Properties of alloys on titanium aluminide γ-TiAl/α2-Ti3Al base at complex alloying
von: S. A. Firstov, et al.
Veröffentlicht: (2018)

Mathematic modeling of diffusion processes of the formation of rim-core structure at sintering TiC–Ni alloys with alloying carbide additions
von: N. V. Lytoshenko
Veröffentlicht: (2016)

Features of Hysteresis of Martensitic Transformations in Cu—Al—Mn Alloys
von: I. R. Bublej, et al.
Veröffentlicht: (2014)

Brazing alloys of Ti–Zr–(Fe, Mn, Co) system for brazing of titanium alloys
von: V. F. Khorunov, et al.
Veröffentlicht: (2013)