Cover Image

About the possibility of brazing of niobium to alumina VK94-1 ceramics by copper and copper-nickel brazing fillers without applying pressure

Saved in:

Bibliographic Details
Date:	2015
Main Author:	V. S. Zhuravlev
Format:	Article
Language:	English
Published:	2015
Series:	Adhesion of Melts and Brazing of Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000567374
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Brazing filler metal without boron and silicon for brazing of heat-resistant nickel alloy
by: S. V. Maksimova, et al.
Published: (2017)

Brazing of ZrO2-ceramic to metal by silver—copper—oxygen filler on the air
by: A. V. Durov
Published: (2014)

Possibility of reduction in growth of intermetallic interlayer during brazing of steel using brazing alloys copper-phosphorus
by: A. A. Pisarev, et al.
Published: (2016)

Phase transformations in the extruded brazing copper based alloys
by: V. K. Nosenko, et al.
Published: (2015)

Autovacuum brazing in repair of copper panels of MCCB moulds
by: G. M. Grigorenko, et al.
Published: (2015)

Brazing of alumina ceramic and graphite to titanium by amorphous foil Ti-20Zr–20Cu–20Ni. As the filler metal
by: Shapiro, A.E.
Published: (2015)

Brazing of alumina ceramic and graphite to titanium by amorphous foil Ti-20Zr–20Cu–20Ni. As the filler metal
by: A. E. Shapiro
Published: (2015)

Features of solidification of complex- alloyed filler metals for brazing hightemperature nickel alloys
by: V. V. Kurenkova, et al.
Published: (2009)

Fluxless brazing of aluminium alloys by brazing filler metal of Al-Ge system
by: O. M. Sabadash, et al.
Published: (2023)

Mechanical properties of brazed joints of dispersion-strengthened copper alloy
by: S. V. Maksimova, et al.
Published: (2010)

Properties of steel-copper bimetal produced by brazing in autonomous vacuum
by: I. P. Serebrjanik, et al.
Published: (2018)

Brazing and metallization of perovskite PNZT-ceramics using Ag—Cu—O filler in the air
by: T. V. Sidorenko
Published: (2015)

Microstructure of brazed joints of nickel aluminides
by: S. V. Maksimova, et al.
Published: (2014)

Deposition of protective coatings on copper panels of MCCB moulds by autovacuum brazing method
by: M. A. Poleshchuk, et al.
Published: (2016)

New system of filler metals for brazing of titanium alloys
by: V. F. Khorunov, et al.
Published: (2012)

Brazing of ferroelectric ceramics in air and pure oxygen
by: Ju. V. Najdich, et al.
Published: (2009)

Strength of heat-resistant nickel alloy Inconel 718 brazed joints, produced using palladium brazing alloys
by: V. F. Khorunov, et al.
Published: (2010)

Physical and mechanical properties of transition zone of bimetal produced by autonomous vacuum brazing of copper on steel
by: M. G. Atroshenko, et al.
Published: (2015)

Effect of cooling mode after diffusion welding and brazing on residual stresses in graphite—copper edge joints
by: V. V. Kvasnitskij, et al.
Published: (2015)

Development of brazing alloy, brazing technologies and correction of castings surface defects of heat-resistant nickel alloys for ship gas turbines
by: V. V. Kvasnytskyi, et al.
Published: (2021)

Vacuum brazing of cast nickel alloy ZhS6U with composite brazing alloys on VPr-36 base. Part 1
by: I. S. Malashenko, et al.
Published: (2014)

Brazing of titanium alloys using brazing alloys based on aluminium
by: V. F. Khorunov, et al.
Published: (2012)

Geometrical parameters of the brazed seam and its structure in plasma brazing of galvanized steel
by: S. V. Maksymova, et al.
Published: (2020)

The effect of tin fillers on structure and technological properties of brazing alloys of Ag-Cu-Zn system
by: V. F. Khorunov, et al.
Published: (2010)

Brazing alloys of Ti–Zr–(Fe, Mn, Co) system for brazing of titanium alloys
by: V. F. Khorunov, et al.
Published: (2013)

Brazing of ceramic&#039;s TiO2 and HfO2
by: A. V. Durov
Published: (2012)

Development of technology of titanium alloy brazing using brazing alloys on Al-Mg system base
by: V. V. Voronov
Published: (2013)

Effect of gap value and initial state of brazing alloy of structure formation of titanium alloy brazed joints
by: S. V. Maksimova, et al.
Published: (2013)

Effect of palladium on structure and technological properties of Ag–Cu–Zn–Ni–Mn system brazing filler metals
by: V. F. Khorunov, et al.
Published: (2012)

Producing nitinol brazed joints (Review)
by: S. V. Maksymova, et al.
Published: (2022)

Reactive-flux brazing of aluminium to titanium
by: O. M. Sabadash, et al.
Published: (2022)

Formation of brazed joints of titanium aluminide
by: S. V. Maksimova
Published: (2009)

Arc brazing of low-carbon steels
by: V. F. Khorunov, et al.
Published: (2013)

About influence of nickel alloying of PSr72 filler on capillary and contact processes during the brazing of non-metallic materials on Al2O3 base with titanium alloys
by: V. S. Zhuravljov, et al.
Published: (2019)

Structure of joints of heat-resistant nickel alloy Inconel 718, made by high-temperature vacuum brazing
by: S. V. Maksimova, et al.
Published: (2010)

Structure and strength properties of brazed joints of JS26NK cast nickel alloy. Part 2
by: Kurenkova, V.V., et al.
Published: (2008)

Effect of nickel and manganese on structure of alloys of Ag–Cu–Zn–Sn system and strength of brazed joints
by: V. F. Khorunov, et al.
Published: (2014)

Spectroscopy pequliarities of thermal plasma with copper and nickel vapours
by: Veklich, A.N., et al.
Published: (2015)

Copper, silver and nickel deposition on aluminium by the galvanic replacement
by: O. I. Kuntyi, et al.
Published: (2017)

Features of the structure of molybdenum-covar brazed joints
by: S. V. Maksymova, et al.
Published: (2022)