Modification of working surface of titanium components of friction units
Gespeichert in:
| Datum: | 2015 |
|---|---|
| Hauptverfasser: | Ye. Sheikin, I. M. Pohreliuk, D. A. Serhach |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
2015
|
| Schriftenreihe: | Superhard Materials |
| Online Zugang: | http://jnas.nbuv.gov.ua/article/UJRN-0000694130 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Library portal of National Academy of Sciences of Ukraine | LibNAS |
Institution
Library portal of National Academy of Sciences of Ukraine | LibNASÄhnliche Einträge
Modification of the surface of spheres from VT1-0 titanium by combining cold plastic deformation and thermodiffusion saturation with nitrogen
von: Yu. O. Tsekhanov, et al.
Veröffentlicht: (2017)
von: Yu. O. Tsekhanov, et al.
Veröffentlicht: (2017)
he Use of Ti tanium in the Friction of Artificial Joints
von: Ye. Sheikin, et al.
Veröffentlicht: (2015)
von: Ye. Sheikin, et al.
Veröffentlicht: (2015)
Modification of aluminum and titanium alloys surface for increasing their wear resistance and tribological characteristics
von: M. M. Student, et al.
Veröffentlicht: (2021)
von: M. M. Student, et al.
Veröffentlicht: (2021)
Increase of working capacity for titanium–chirulen friction pair
von: S. E. Shejkin, et al.
Veröffentlicht: (2012)
von: S. E. Shejkin, et al.
Veröffentlicht: (2012)
Surface strengthening of VT1-0 titanium under thermodiffusion with nitrogen in the temperature range 650...750°S
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2014)
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2014)
Combined vacuum-arc hardening of frictional unit components
von: Belous, V.A., et al.
Veröffentlicht: (2016)
von: Belous, V.A., et al.
Veröffentlicht: (2016)
Influence of VT22 alloy structural factors on surface hardening during deformation-diffusion treatment
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2017)
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2017)
Laser-assisted modification of a surface of titanium implants
von: M. A. Vasilev, et al.
Veröffentlicht: (2010)
von: M. A. Vasilev, et al.
Veröffentlicht: (2010)
Some aspects to increase stable working surface friction
von: V. M. Beresnev, et al.
Veröffentlicht: (2004)
von: V. M. Beresnev, et al.
Veröffentlicht: (2004)
Surface modification of the titanium alloy VT22 by high current pulsed electron beam
von: Donets, S.Ye., et al.
Veröffentlicht: (2022)
von: Donets, S.Ye., et al.
Veröffentlicht: (2022)
Silver nano-particles as friction modificators in couples steel-steel
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2012)
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2012)
Pulse-plasma modification of the surface of metal stamps of hot drawing of titanium alloy products
von: Yu. M. Tiurin, et al.
Veröffentlicht: (2021)
von: Yu. M. Tiurin, et al.
Veröffentlicht: (2021)
One- and two-component diffusion saturation of titanium with interstitial elements
von: Ya. S. Matychak, et al.
Veröffentlicht: (2013)
von: Ya. S. Matychak, et al.
Veröffentlicht: (2013)
The influence of dispersity of the powder component of the saturating medium on titanium alloys carbooxiding
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2019)
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2019)
Influence of a surface modification of natural clay components on the desorption of cesium
von: S. A. Kobets, et al.
Veröffentlicht: (2015)
von: S. A. Kobets, et al.
Veröffentlicht: (2015)
High-speed Friction welding of titanium alloys — structure and properties of joints
von: D. Miara, et al.
Veröffentlicht: (2018)
von: D. Miara, et al.
Veröffentlicht: (2018)
Reliability control and endurance of friction units of polygraphic machines
von: T. A. Roik, et al.
Veröffentlicht: (2011)
von: T. A. Roik, et al.
Veröffentlicht: (2011)
Wear resistance and structural modification of the surface layer of high-chromium martensitic alloys under abrasive action and sliding friction
von: N. B. Efros, et al.
Veröffentlicht: (2014)
von: N. B. Efros, et al.
Veröffentlicht: (2014)
Mass-transfer in high-gradient field during friction welding and modification of the upper layer
von: A. Hurka, et al.
Veröffentlicht: (2011)
von: A. Hurka, et al.
Veröffentlicht: (2011)
Physicomechanical characteristics of VT6 titanium alloy after surface deformation-diffusion treatment
von: T. M. Kravchyshyn, et al.
Veröffentlicht: (2020)
von: T. M. Kravchyshyn, et al.
Veröffentlicht: (2020)
Producing of long semi-products of sintered titanium alloys by using friction welding
von: A. E. Kapustjan
Veröffentlicht: (2015)
von: A. E. Kapustjan
Veröffentlicht: (2015)
Properties of friction surfaces of the bronze-steel pair
von: M. V. Kindrachuk, et al.
Veröffentlicht: (2013)
von: M. V. Kindrachuk, et al.
Veröffentlicht: (2013)
Phraseological units with anthroponym component
von: M. Pelypas
Veröffentlicht: (2021)
von: M. Pelypas
Veröffentlicht: (2021)
Hereditary modification of steels components of the charge with a prepared structure
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2016)
von: Ye. Kondratiuk, et al.
Veröffentlicht: (2016)
Evolution of the stress state and structure of the friction surface of a bearing
von: V. L. Zozulja, et al.
Veröffentlicht: (2015)
von: V. L. Zozulja, et al.
Veröffentlicht: (2015)
The influence of titanium dioxide modification by sulfur and carbon on physico-chemical and photocatalytic properties
von: M. V. Shapovalova, et al.
Veröffentlicht: (2019)
von: M. V. Shapovalova, et al.
Veröffentlicht: (2019)
Modification of Activated Carbon KAU Surface Properties
von: Brazhnyk, D.V., et al.
Veröffentlicht: (2011)
von: Brazhnyk, D.V., et al.
Veröffentlicht: (2011)
Vacuum-arc modification of steel surfaces
von: A. A. Andreev
Veröffentlicht: (2007)
von: A. A. Andreev
Veröffentlicht: (2007)
Electronically induced modification of thin layers on surfaces
von: Bauer, U., et al.
Veröffentlicht: (2007)
von: Bauer, U., et al.
Veröffentlicht: (2007)
Friction slipping of elastic bodies in the presence of sub-surface inclusion
von: N. I. Malanchuk, et al.
Veröffentlicht: (2016)
von: N. I. Malanchuk, et al.
Veröffentlicht: (2016)
Effect of Molybdenum on Formation of Nanostructured Film at Friction of Titanium Material Ti—Cr—Mo—TiC
von: Petrova, A.M., et al.
Veröffentlicht: (2012)
von: Petrova, A.M., et al.
Veröffentlicht: (2012)
Effect of molybdenum on formation of nanostructured film at friction of titanium material Ti–Cr–Mo–TiC
von: A. M. Petrova, et al.
Veröffentlicht: (2012)
von: A. M. Petrova, et al.
Veröffentlicht: (2012)
Surface modification of the amorphous metallic electrodes
von: O. Hertsyk, et al.
Veröffentlicht: (2017)
von: O. Hertsyk, et al.
Veröffentlicht: (2017)
The influence of the phase – structural state of the near-surface layers on mechanical properties of VT1-0 titanium alloy
von: A. T. Pichuhin, et al.
Veröffentlicht: (2011)
von: A. T. Pichuhin, et al.
Veröffentlicht: (2011)
Structure and topography of titanium alloys surface after thermal-diffusion saturation from boron carbide in vacuum
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2010)
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2010)
Thermal stability of the deformed surface layer of Ti–5Al–5Mo–5V–1.5Cu–Fe titanium alloy in nitrogen-containing medium
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2021)
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2021)
Photochemical modification of the surface of NaI:Tl crystals
von: K. A. Kudin, et al.
Veröffentlicht: (2011)
von: K. A. Kudin, et al.
Veröffentlicht: (2011)
Energodynamics of contact-friction interaction in metalpolimeric friction pairs
von: M. V. Kindrachuk, et al.
Veröffentlicht: (2018)
von: M. V. Kindrachuk, et al.
Veröffentlicht: (2018)
Effect of parameters of friction welding conditions on structure and mechanical properties of joints of titanium alloy VT3-1
von: A. G. Seliverstov, et al.
Veröffentlicht: (2013)
von: A. G. Seliverstov, et al.
Veröffentlicht: (2013)
Modification effects of microsecond high current electron beam exposure on titanium VT22 alloy
von: Donets, S.Ye., et al.
Veröffentlicht: (2019)
von: Donets, S.Ye., et al.
Veröffentlicht: (2019)
Ähnliche Einträge
-
Modification of the surface of spheres from VT1-0 titanium by combining cold plastic deformation and thermodiffusion saturation with nitrogen
von: Yu. O. Tsekhanov, et al.
Veröffentlicht: (2017) -
he Use of Ti tanium in the Friction of Artificial Joints
von: Ye. Sheikin, et al.
Veröffentlicht: (2015) -
Modification of aluminum and titanium alloys surface for increasing their wear resistance and tribological characteristics
von: M. M. Student, et al.
Veröffentlicht: (2021) -
Increase of working capacity for titanium–chirulen friction pair
von: S. E. Shejkin, et al.
Veröffentlicht: (2012) -
Surface strengthening of VT1-0 titanium under thermodiffusion with nitrogen in the temperature range 650...750°S
von: I. M. Pohreliuk, et al.
Veröffentlicht: (2014)