Cover Image

Analysis of the asymmetrically rolling parameters of titanium powder

Saved in:

Bibliographic Details
Date:	2015
Main Authors:	Ju. Prikhodko, M. A. Dedik, K. A. Gogaev, V. S. Voropaev, A. I. Itsenko
Format:	Article
Language:	English
Published:	2015
Series:	Fundamental and applied problems of ferrous metallurgy
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000839219
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

. Comprehensive finite element study of titanium strip production processes using asymmetric cold rolling of powder with subsequent sintering
by: Ju. Prikhodko, et al.
Published: (2019)

Production of highstrength titanic strips by consolidation of powder using technology of asymmetrical rolling
by: K. A. Gogaev, et al.
Published: (2016)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
by: Ju. Prikhodko, et al.
Published: (2013)

Modeling valkovoe casting-rolling of aluminum by finite element method
by: Ju. Prikhodko, et al.
Published: (2014)

Longitudinal and normal stresses at the source of deformation at asymmetrical strip rolling
by: V. A. Nikolaev
Published: (2009)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
by: S. V. Bobyr, et al.
Published: (2017)

Study of the rolling process of P6M5K5 powder by processing on a rolling mill
by: K. O. Hohaiev, et al.
Published: (2022)

On the role of hydrogen in sintering of titanium powders
by: D. H. Savvakin, et al.
Published: (2011)

Studies of processes of consolidation of porous powder titanium using measurement of parameters of resonant vibration
by: O. V. Vdovychenko
Published: (2013)

Corrosion properties of titanium obtained by powder metallurgy method
by: I. M. Pohreliuk, et al.
Published: (2016)

Comparative analysis of properties of powders of Cu—S and Cu—P alloys got the stove synthesis. 1. Chemical composition, microhardness and compactibility of powders
by: O. K. Radchenko, et al.
Published: (2014)

About some rolling parameters calculation
by: V. A. Nikolaev
Published: (2009)

Estimation of quality evaluation of porous powder nonsintered materials based on titanium
by: Ju. F. Lugovskoj, et al.
Published: (2015)

Computer simulation and sheet rolling process control systems of Iron and Steel Institute
by: Ju. Prikhodko
Published: (2014)

Properties of nickel powder alloys with titanium carbide strengthening
by: T. S. Cherepova, et al.
Published: (2016)

Force parameters in the process of drawing in free rolls
by: V. A. Nikolaev, et al.
Published: (2009)

Estimation of the real effectiveness of cold-rolled strip flatness control with selectivity emulsion feeding
by: Ju. Prikhodko
Published: (2013)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
by: S. E. Kondratiuk, et al.
Published: (2016)

Status and trends of development of the production of cold-rolled tubes from titanium alloys
by: A. V. Mishchenko
Published: (2019)

Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products
by: V. H. Razdobrieiev, et al.
Published: (2019)

Corrosion resistance of the welded joints of titanium synthesized by the method of powder metallurgy
by: Ye. Kapustian, et al.
Published: (2018)

Electrochemical behavior of titanium, synthesized by powder metallurgy method in hydrochloric acid.
by: I. M. Pohreliuk, et al.
Published: (2016)

Application of ultrafine nickel powder for diffusion joining of titanium to stainless steel
by: A. V. Ljushinskij
Published: (2019)

Comparative Analysis of Post-Quantum Asymmetric Encrypt Algorithms
by: V. V. Onopriienko, et al.
Published: (2019)

Heat-Resistance of the Powder Cobalt Alloys Reinforced by Niobium or Titanium Car
by: T. S. Cherepova, et al.
Published: (2016)

The influence of dispersity of the powder component of the saturating medium on titanium alloys carbooxiding
by: I. M. Pohreliuk, et al.
Published: (2019)

Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680
by: Ju. Prikhodko, et al.
Published: (2019)

Tensile Deformation and Fracture of α+β-Titanium Alloys Synthesized by Powder Metallurgy
by: A. I. Dekhtjar, et al.
Published: (2013)

Peculiarities of technology of production of sheet rolled metal from wastes of titanium sponge and its products
by: V. S. Konstantinov, et al.
Published: (2009)

Estimates for the best asymmetric approximations of asymmetric classes of functions
by: Motornyi, V. P., et al.
Published: (2011)

Analysis of the amount of retained austenite in the structure of steel rolls for sheet rolling
by: S. V. Bobyr, et al.
Published: (2020)

Comparative analysis of the properties of powders of alloys of Cu—S and Cu—P and furnace synthesis. 2. The form factors and particle size
by: O. K. Radchenko, et al.
Published: (2014)

X-ray parameters of nanocrystalline microstructure titanium obtained by cryodeformation
by: Ju. M. Plotnikova, et al.
Published: (2016)

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
by: V. H. Razdobrieiev, et al.
Published: (2022)

RESEARCH OF DYNAMIC PARAMETERS OF THE ELECTRIC DRIVE ON THE BASIS OF ROLLING ROTOR MOTOR
by: Kulinchenko, G. V., et al.
Published: (2016)

The influence of hot stamping on elastic properties and anisotropy of titanium-based powder composites
by: H. A. Bahliuk, et al.
Published: (2021)

An Asymmetric Noncommutative Torus
by: Dąbrowski, L., et al.
Published: (2015)

Effect of misrostructural features on corrosion resistance of titanium alloys produced by powder technologies
by: I. M. Pohreliuk, et al.
Published: (2020)

Rolling of the bimetallic aluminum-steel strips received by roller casting rolling
by: Ju. Gridin, et al.
Published: (2013)

Investigation of process of manufacture of hot-rolled pipes of titanium alloy VT20 ingots, produced by the method of electron beam melting
by: N. P. Trigub, et al.
Published: (2010)