Buchumschlag

Features of the Gas Regime of the Form and Hydrogen Porosity of the Castings During the Filling Process

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
1. Verfasser:	F. M. Kotliarskyi
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2021
Schriftenreihe:	Casting processes
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001276179
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The influence of hydrogen on forming and features alloys of aluminium alloys, which were filled by low overheating
von: F. M. Kotljarskij, et al.
Veröffentlicht: (2014)

Influence of porosity on erosion behavior and hydrogen permeability of tungsten films
von: G. P. Glazunov, et al.
Veröffentlicht: (2006)

Influence of porosity on erosion behavior and hydrogen permeability of tungsten films
von: Glazunov, G.P., et al.
Veröffentlicht: (2006)

Extraordinary Flooding of Aluminum Alloy Castings
von: F. M. Kotliarskyi
Veröffentlicht: (2020)

Features of the Fluid Regime of Postsedimentogenic Processes During the Formation of Gas Capacity of the Transcarpathian Basin (Within the Limits of Ukraine)
von: I. M. Naumko, et al.
Veröffentlicht: (2022)

Automatic control of filling process of the molds at casting under low electromagnetic pressure
von: K. S. Bogdan, et al.
Veröffentlicht: (2017)

Existing Ideals about the Influence of Hydrogen on the Properties of Aluminum Alloys. Report 1
von: F. M. Kotliarskyi
Veröffentlicht: (2019)

Existing Ideals about the Influence of Hydrogen on the Properties of Aluminum Alloys. Report 2
von: F. M. Kotliarskyi
Veröffentlicht: (2020)

Change of working properties for slag-forming mixtures during sequence casting and its effect on continous casting process
von: A. N. Smirnov, et al.
Veröffentlicht: (2015)

Porosity and packing features of nano- and micro-particles of carbon and silica adsorbents
von: V. M. Gun'ko
Veröffentlicht: (2023)

Features of thermal and vyazkouprugoo behavior formed in situ filled with mixtures of linear polyurethane and polystyrene
von: L. F. Kosjanchuk, et al.
Veröffentlicht: (2013)

Influence of technological parameters of SLM-process on porosity of metal products
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2020)

Driving Force of Metals Hydrogenation Process. II. As Cast Titanium
von: A. A. Shkola
Veröffentlicht: (2014)

Determination of porosity of argillaceous rocks in the cased oil-gas boreholes with the help of radioactive and acoustic logging
von: M. S. Bondarenko, et al.
Veröffentlicht: (2010)

Determination of porosity of clay rocks in cased oil and gas wells using radioactive and acoustic logging
von: Bondarenko, M. S., et al.
Veröffentlicht: (2010)

Electron flow stability in the gas filled diode
von: Pashchenko, A., et al.
Veröffentlicht: (2017)

Porosity and bioactivity of hydroxyapatite-glass composites
von: Skorokhod, V.V., et al.
Veröffentlicht: (2006)

Structural features and porosity of the POSS-containing nanocomposites based on polyurethane-poly(hydroxypropyl methacrylate) matrix, which is formed by the principle of sequential IPNs
von: L. V. Karabanova, et al.
Veröffentlicht: (2019)

The transformation of carbonic sandstone porosity of the Donbas
von: Y. V. Antipovich
Veröffentlicht: (2014)

Condensation-dependent porosity in film nanostructures
von: Cheremskoy, P.G., et al.
Veröffentlicht: (2005)

Physics-chemical processes on surface of steel casts during casting into ceramized molds
von: T. V. Lysenko, et al.
Veröffentlicht: (2015)

Influence of Melt Hydrogenation with Other Types of Processing on Formation and Quality of Castings from Aluminum Alloys
von: F. M. Kotljarskij
Veröffentlicht: (2019)

Effect of structure on the mechanical properties of cast metal and on forming cast
von: F. M. Kotljarskij
Veröffentlicht: (2016)

Investigation of heat evolution features in slag pool during electroslag casting with melting-on
von: A. F. Muzhichenko, et al.
Veröffentlicht: (2011)

Distribution of carbonate cements in the sandstones of the southeast of the Dnieper-Donetsk depression in the aspect of forming secondary porosity in them at high depths
von: S. F. Povieriennyi, et al.
Veröffentlicht: (2020)

DISTRIBUTION OF CARBONATE CEMENTS IN THE SANDSTONES OF THE SOUTHEAST OF THE DNIEPER-DONETSK DEPRESSION IN THE ASPECT OF FORMING SECONDARY POROSITY IN THEM AT HIGH DEPTHS
von: Poverennyi, S.F., et al.
Veröffentlicht: (2020)

The influence of hydrogen peroxide on composition and porosity of oxide ceramic coatings on Al–Si–Cu ta Al–Cu–Mg alloys
von: V. M. Posuvailo, et al.
Veröffentlicht: (2021)

The β-expansion of the D=1 fermionic spinless Hubbard model off the half-filling regime
von: Correa Silva, E.V., et al.
Veröffentlicht: (2015)

Filling of the First Forms of Ukrainian Schools in 1933–1940 as the Evidence of Catastrophic Casualties of Children During the Holodomor-Genocide
von: V. Serhiichuk
Veröffentlicht: (2020)

Physical and chemical factors influencing the porosity of apatite-biopolymer composites
von: L. F. Sukhodub, et al.
Veröffentlicht: (2022)

Effects of porosity in a model of corrosion and passive layer growth
von: F.D.A. Aarão Reis
Veröffentlicht: (2017)

Test of pure hydrogen inflow system during dischare cleaning and work regimes of the Uragan-3M torsatron
von: Glazunov, G.P., et al.
Veröffentlicht: (2005)

Features of the Technological Process of Manufacturing Two-layer Cast Iron Castings with Differentiated Properties
von: I. V. Lukjanenko
Veröffentlicht: (2019)

Research of the processes of hydrogen sorption and desorption of cast and fast quenched Zr–V alloys
von: D. V. Vynohradov, et al.
Veröffentlicht: (2014)

Influence of porosity and size of pores on the electrical resistance of coal
von: E. P. Feldman, et al.
Veröffentlicht: (2010)

Methods for determining closed porosity in clastic grains of rocks
von: Ya. V. Antipovych
Veröffentlicht: (2018)

The features of the collective modes in aerogels filled with superfluid helium
von: Zadorozhko, A.A., et al.
Veröffentlicht: (2009)

About generation of subharmonics and stochatic regimes arising in periodic plasma-filled waveguides excited by charged beam
von: Babaskin, A.A., et al.
Veröffentlicht: (2000)

Features of the aggregative mechanism of spherical and vermicular graphite forming in the modified cast irons
von: O. V. Sotsenko
Veröffentlicht: (2012)

Thermo-stressed state of a body with a gas-filled crack
von: R. Martyniak
Veröffentlicht: (2015)