Buchumschlag

Tool alloys plasticity and strength characteristics determination in microvolumes

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	V. V. Pashynskyi, M. H. Subbotina, V. I. Zakiiev
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Metal Science and Treatment of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000394459
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Research of tool alloys ability to dissipate energy in microvolumes
von: V. V. Pashynskyi, et al.
Veröffentlicht: (2015)

Cryopreservation of single epididymal and testicular spermatozoa in microvolume
von: V. V. Podufalij
Veröffentlicht: (2013)

Strength and plasticity of metal surface alloys nitrated in glow discharge
von: M. S. Stechyshyn, et al.
Veröffentlicht: (2018)

Study of the fracture features of layered ceramics in its microvolumes by indentation methods
von: O. M. Hryhoriev, et al.
Veröffentlicht: (2020)

Dependence of the strength and plasticity of WC–6Co medium-grained hard alloys on deformation characteristics of the cobalt and carbide phases
von: N. V. Lytoshenko
Veröffentlicht: (2012)

Dependencies of discrete-additive formation of microvolumes of metal being solidified in multilayer micro-plasma powder surfacing of nickel alloys
von: K. A. Jushchenko, et al.
Veröffentlicht: (2016)

Effect of mode of electron beam welding, heat treatment and plastic deformation on strength of joints of aluminum 1570 alloy
von: V. V. Skriabinskyi, et al.
Veröffentlicht: (2020)

Investigation of influence of plasticity materials on tensile strength of the composite joint
von: M. V. Dudyk, et al.
Veröffentlicht: (2013)

Macrolocalization of plastic deformation and staging of plastic flow in polycrystalline metals and alloys
von: V. I. Danilov, et al.
Veröffentlicht: (2008)

Theoretical shear strength and the onset of plasticity in nanodeformation of cubic boron nitride
von: S. N. Dub, et al.
Veröffentlicht: (2017)

On calculation of cutting forces and characteristics of the contact interaction of a chip with the tool in cutting plastic metals
von: A. A. Vinogradov
Veröffentlicht: (2013)

Plasticity of materials determined by the indentation method
von: Yu. V. Milman, et al.
Veröffentlicht: (2018)

Plasticity of materials determined by the indentation method
von: Milman, Yu.V., et al.
Veröffentlicht: (2018)

Low-temperature mechanical properties of fullerites: structure, elasticity, plasticity, strength
von: S. V. Lubenets, et al.
Veröffentlicht: (2019)

The mechanical strength advance of radiation-hard plastic scintillators with diffusion enhancers
von: Velmozhnaya, E.S., et al.
Veröffentlicht: (2015)

Relation of Characteristics of ‘Brittle&#039; Strength and Mechanical Stability with Main Mechanical Characteristics of Structural Titanium Alloys
von: O. M. Ivasishin, et al.
Veröffentlicht: (2013)

Characteristics of structural strength of D16T alloy welded joints, produced by friction stir welding
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2018)

Plasticity at Martensitic Transformation in Co—Ni Alloys
von: V. A. Lobodjuk
Veröffentlicht: (2013)

Increasing the Fatigue Strength of Welding Joints with Accumulasted Fatigue Damages by Surface Plastic Deformation
von: V. V. Knysh, et al.
Veröffentlicht: (2024)

Analysis of the plasticity characteristics of progressively drawn steel wires
von: M. I. Hredil, et al.
Veröffentlicht: (2015)

Weldability of high-strength alloyed steels with yield strength of 590...785 MPa
von: V. D. Poznjakov
Veröffentlicht: (2018)

Analysis of the plasticity characteristics of progressively drawn steel wires
von: Hredil, М.І., et al.
Veröffentlicht: (2015)

Development of Strength and Yield Criteria Based on the Relationship between Elastic and Plastic Strains
von: Y. Li
Veröffentlicht: (2014)

Development of Strength and Yield Criteria Based on the Relationship between Elastic and Plastic Strains
von: Li, Y.
Veröffentlicht: (2014)

Impact of heat and plastic treatments on temperature and time stability of amorphous alloys
von: V. I. Lysov, et al.
Veröffentlicht: (2012)

Development of new high-strength titanium alloy
von: S. V. Akhonin, et al.
Veröffentlicht: (2016)

Electron beam welding of complexly-alloyed high-strength titanium alloy
von: S. V. Akhonin, et al.
Veröffentlicht: (2016)

Microstructure and low-temperature plastic deformation of Al–Li alloy
von: N. V. Isaev, et al.
Veröffentlicht: (2012)

Evaluation of crack growth resistance characteristics in unidirectional glass-plastics
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2012)

Strength and specifics of fracture of welded joints of high-strength aluminium alloys at low temperature
von: T. M. Labur
Veröffentlicht: (2011)

Nanocrystallization of amorphous Fe-based alloys under severe plastic deformation
von: M. O. Vasylyev, et al.
Veröffentlicht: (2020)

Evaluation of the Test Temperature Effect on Failure Mechanisms and Notched Impact Strength Characteristics of Ultra-Hard Low Alloy Steels
von: Binar, T., et al.
Veröffentlicht: (2011)

Model for determining the digging force at excavation the plasticity waterlogged soils
von: T. V. Shepel
Veröffentlicht: (2014)

Effect of temperature on microplasticity and cyclic strength of alloy 1201
von: Seregin, G.V.
Veröffentlicht: (1985)

Study of thermophysical characteristics of graphite plastics based on phenylone
von: A. I. Burja, et al.
Veröffentlicht: (2018)

Grain size and correlation of strength, plasticity and toughness properties with coercive force of steels with ferrito-pearlitic structure
von: G. V. Bida
Veröffentlicht: (2010)

Evaluation of diamond-coated tools in drilling high-strength CFRP composites
von: J. Xu, et al.
Veröffentlicht: (2022)

Structural and phase transformations in alloys under the severe plastic deformation
von: I. E. Volokitina
Veröffentlicht: (2023)

Wet underwater welding of low-alloy steels of increased strength
von: Ju. Maksimov, et al.
Veröffentlicht: (2013)

Determination of Strength of Tanks with Liquid in Non-Parachute Throwing Off
von: A. V. Kovtun, et al.
Veröffentlicht: (2023)