Buchumschlag

Nitride hardening influence on the phase transformation and the formation of high-carbon steel structure upon cooling after austenitizing

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	Ya. Shypytsyn, D. M. Korolenko, Ya. Zolotar, Ye. Shyshkin
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Metal Science and Treatment of Metals
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000431416
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Effect of pulsed low-voltage plasma and hardening of the matrix nanodimensional nitride phases on the structure of cemented layer of steel
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2011)

Influence of dispersion nitride hardening on formation of structure of high-carbon steels
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2017)

Pecularities of phase redistribution of nitrogen and vanadium in austenizating nitride strengthened steel for rail wheels
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2014)

The effect of dispersion nitride hardening on the parameters of γ→α transformation in night-carbon steels
von: Ja. Shipitsyn, et al.
Veröffentlicht: (2017)

Phase transformations of austenitic stainless modified steels
von: Ye. H. Aftandiliants
Veröffentlicht: (2019)

Application of nitride dispersion strengthening in creating Cr – Mn – N austenitic steels for high-temperature Heat Power Engineering
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2012)

High-carbon steel with a nitride dispersion strengthening for transport and other types of engineering
von: Ja. Shipitsyn, et al.
Veröffentlicht: (2014)

Analysis of Gas Nitriding Characteristics under Different Cold Hardening and Nitriding Pressure Conditions for Low-Carbon Low-Alloy Steel
von: Zhou, Z A., et al.
Veröffentlicht: (2018)

The structure influencing of stainless steel with metastable austenite on the cavitational resistance
von: I. F. Kirchu, et al.
Veröffentlicht: (2011)

Тhe dose dependence of inert gases irradiation hardening of 316 austenitic stainless steel after low temperature irradiation
von: Karpov, S.A., et al.
Veröffentlicht: (2018)

The influence of austenitization temperature and the rate of cooling on the structure of chrome-molybdenum-vanadium steel
von: V. A. Lutsenko, et al.
Veröffentlicht: (2017)

Phase-structure transformations in steel 150H7T at cooling
von: S. V. Bobyr, et al.
Veröffentlicht: (2014)

Mechanical and functional properties of Cr-(Ni)-Mn-N austenitic heat-resistant steels
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2019)

The stamping steel for hot deformation with controlled austenit transformation
von: K. O. Hohaiev, et al.
Veröffentlicht: (2014)

Kinetic peculiarities of titanium nitriding caused by phase-structural transformations
von: Ya. S. Matychak
Veröffentlicht: (2012)

Models and characteristics of discontinuous transformation of austenite in iron–carbon alloys
von: S. V. Bobyr, et al.
Veröffentlicht: (2014)

Influence of a kind treatment on the austenite grain high carbon steel
von: E. V. Parusov, et al.
Veröffentlicht: (2014)

Analytical models of austenite transformation in steel with allowance for internal stresses
von: S. V. Bobyr
Veröffentlicht: (2018)

Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)

Humidified survival of high-carbon steels with different morphology of cement compound phase
von: Ya. Shypytsyn, et al.
Veröffentlicht: (2018)

Regularities and mechanisms of thermomechanical hardening of rolled low-carbon steel
von: V. E. Gromov, et al.
Veröffentlicht: (2011)

The effect of heating temperature and carbon content on the growth of austenite grains in carbon steels for manufacture of railway wheels
von: A. I. Babachenko, et al.
Veröffentlicht: (2015)

Shear transformation of austenite in steels considering stresses&#039; effects
von: S. V. Bobyr, et al.
Veröffentlicht: (2022)

About the austenite transformation kinetics in steels under non-equilibrium conditions
von: M. F. Evsjukov, et al.
Veröffentlicht: (2013)

Formation of structural-phase states, defect substructure and properties of a surface of thermomechanically hardened low-carbon steel
von: V. E. Gromov, et al.
Veröffentlicht: (2016)

Phase transformations in low-carbon steels, alloyed a manganese
von: M. F. Evsjukov, et al.
Veröffentlicht: (2012)

Features of the influence of carbon on the kinetics of the transformation of supercooled austenite in the diffusion and the intermediate areas
von: O. M. Savytskyi, et al.
Veröffentlicht: (2013)

Analysis of phase-structural transformations during cooling of steels, taking into account the deformations and stresses
von: S. V. Bobyr, et al.
Veröffentlicht: (2018)

On the mechanism of hardening wurtzitic boron nitride under an indenter
von: G. S. Olejnik
Veröffentlicht: (2013)

Investigation of the decay kinetics of austenite with continuous cooling K76F steel for wide-gauge railway rails
von: O. I. Babachenko, et al.
Veröffentlicht: (2018)

Die Steel with Regulated Austenitic Transformation for Hot Deformation of Copper-Nickel Alloy
von: K. O. Gogaev, et al.
Veröffentlicht: (2022)

On the kinetics of bainite transformation of austenite in steel during heat treatment in the production flow
von: M. F. Evsjukov, et al.
Veröffentlicht: (2014)

Cast steel with adjustable austenitic transformation during operation, obtained by electroslag remelting
von: O. M. Sydorchuk, et al.
Veröffentlicht: (2020)

Contact endurance of steels after ion nitriding in hydrogen-free media
von: P. V. Kaplun, et al.
Veröffentlicht: (2019)

Dependence of corrosion behaviour of austenitic chromium-nickel steels on the paramagnetic state of austenite
von: H. V. Snizhnoi
Veröffentlicht: (2013)

Features of phase-structural transformations during cooling of chromium steels for a hot deformation tool
von: S. V. Bobyr, et al.
Veröffentlicht: (2014)

Peculiarities of laser welding of austenite and austenite-ferrite stainless steels with high manganese content
von: V. Kirots, et al.
Veröffentlicht: (2012)

Increase of heat resistance and properties of die steel with control of austenitic transformation during operation
von: O. M. Sydorchuk, et al.
Veröffentlicht: (2019)

Low-cycle fatigue of steels after ion nitriding in hydrogen-free environments
von: P. V. Kaplun, et al.
Veröffentlicht: (2016)

Simulation of phase transformations in alloy steels subjected to cooling during heat treatment of rolling-mill rolls
von: S. V. Bobyr, et al.
Veröffentlicht: (2017)