Buchumschlag

Improvement of energy efficiency of machines for resistance spot welding at the expense of a longitudinal compensation of reactive power

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
1. Verfasser:	A. A. Pismennyj
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Automatic Welding
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000463234
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Machine for resistance spot microwelding
von: Yu. M. Lankin, et al.
Veröffentlicht: (2023)

Stabilization of welding current of resistance spot welding machines at mains voltage fluctuations
von: Ju. N. Lankin, et al.
Veröffentlicht: (2017)

Resistance spot welding with special preparation of edges welded
von: Ju. A. Tsumarev
Veröffentlicht: (2010)

Drive for compression of electrodes for resistance spot microwelding machines
von: Ju. N. Lankin, et al.
Veröffentlicht: (2012)

REACTIVE POWER COMPENSATION IN ASYNCHRONOUS ELECTRIC DRIVES.
von: Malyar, V. S., et al.
Veröffentlicht: (2013)

Improved method of evaluating power losses in pulse converters of micro resistance welding machines
von: O. F. Bondarenko, et al.
Veröffentlicht: (2018)

Active Power Filter for Reactive Power Compensation for the Powerful Sounding Pulses Shapers
von: I. F. Domnin, et al.
Veröffentlicht: (2020)

Internal capacitive compensation of the reactive power of the screw electromechanical converter
von: Zablodskiy, M. M., et al.
Veröffentlicht: (2024)

Reactive power compensation approach with dynamic mode of load current
von: V. J. Zhuikov, et al.
Veröffentlicht: (2018)

Portable system of monitoring and control of process of resistance spot welding
von: P. M. Rudenko, et al.
Veröffentlicht: (2010)

Modern methods and means of NDT of welded joint made by resistance spot welding (Review)
von: E. V. Shapovalov, et al.
Veröffentlicht: (2013)

Spatial distribution of magnetic field and its minimisation in resistance spot welding
von: O. G. Levchenko, et al.
Veröffentlicht: (2012)

Analysis of deformations of copper-chromium based electrodes in resistance-spot welding
von: Ch. Nachimani
Veröffentlicht: (2015)

MODES OF OPERATION OF THE SYSTEM OF TRACTION POWER AC USING REACTIVE POWER COMPENSATION DEVICES
von: Domanskyi, I. V.
Veröffentlicht: (2015)

Analytical method of determining conditions for full compensation of reactive power in the power supply system
von: Yagup, V. G., et al.
Veröffentlicht: (2024)

Electric drives with compensated reactive moment
von: Ye. Antonov
Veröffentlicht: (2019)

Application of plastic deformation to improve the mechanical properties of resistance welding machines
von: O. A. Davydenko, et al.
Veröffentlicht: (2021)

Step-by-step calculation of reactive power compensation in electrical networks based on their decomposition
von: O. D. Demov, et al.
Veröffentlicht: (2017)

Thyristor controlled reactive power compensator with automatic adjustment oscillatory LC-circuit
von: O. I. Chyzhenko, et al.
Veröffentlicht: (2017)

RESEARCH OF THE MODES OF FULL COMPENSATION OF REACTIVE POWER IN A THREE-PHASE POWER SUPPLY SYSTEM
von: Yagup, V. G., et al.
Veröffentlicht: (2019)

COMPENSATION OF REACTIVE POWER BY INDUSTRIAL SOLAR POWER PLAT AND INFLUENCE OF THIS PROCESS ON THE CENTRAL ELECTRIC NETWORK
von: Bordakov, М.
Veröffentlicht: (2019)

Single-phase power shunt active filter design using photovoltaic as reactive power compensator
von: Dwinanto, B., et al.
Veröffentlicht: (2025)

Compensation of reactive power by industrial solar power plat and influence of this process on the central electric network
von: M. M. Bordakov
Veröffentlicht: (2019)

Monitoring of quality of a.c. resistance spot welding using wavelet analysis
von: I. O. Skachkov
Veröffentlicht: (2012)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: A. M. Savitskij, et al.
Veröffentlicht: (2012)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

Improvement of technical characteristics on orbital argon-ark welding at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2012)

Identification of three-phase linear load parameters for compensation of reactive power by searching optimization
von: V. G. Jagup, et al.
Veröffentlicht: (2019)

Simulation of the electric power generation system on the basis of dfig with active filtring capabilitites and reactive power compensation
von: V. M. Mykhalskyi, et al.
Veröffentlicht: (2018)

Nanocomposite materials based on powder copper for the electrodes of resistance spot welding galvanized steels
von: E. P. Shalunov, et al.
Veröffentlicht: (2016)

A method of improving the quality of the current in the system &quot;network – controlled bridge thyristor compensator of reactive power&quot;
von: O. I. Chyzhenko, et al.
Veröffentlicht: (2017)

Improving the efficiency of the SLM-process by adjusting the focal spot diameter of the laser beam
von: S. V. Adzhamskyi, et al.
Veröffentlicht: (2021)

Improvement of technology of arc spot welding of overlap joints using results of mathematic modeling
von: O. V. Makhnenko, et al.
Veröffentlicht: (2010)

An Impact of Changes in the Inductance of Distribution Network on the Modes and Parameters of Equipment of Thyristor Compensator of Reactive Power
von: O. I. Chyzhenko, et al.
Veröffentlicht: (2017)

To the question of increasing the power factor of resistance welding machine&#039;s single-phase power supplies
von: S. K. Podnebennaja, et al.
Veröffentlicht: (2017)

On the problem of providing the the magnetic compatibility of power sources of resistance welding machines with electric mains
von: S. K. Podnebennaja, et al.
Veröffentlicht: (2016)

Improved grey wolf optimizer for optimal reactive power dispatch with integration of wind and solar energy
von: Laouafi, F.
Veröffentlicht: (2025)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: Савицкий, А. М., et al.
Veröffentlicht: (2016)

Improvement technological and ecological characteristics to welding of carbonaceous steels in inert gases at the expense of arch activation
von: A. M. Savitskij, et al.
Veröffentlicht: (2011)