Cover Image

Physicomechanical parameters under cutting of deposited surfaces

Saved in:

Bibliographic Details
Date:	2021
Main Authors:	V. V. Kolomiiets, R. V. Antoshchenkov, I. A. Fabrychnikova, S. A. Bohdanovych, I. V. Halych
Format:	Article
Language:	English
Published:	2021
Series:	Materials Science (Physicochemical mechanics of materials)
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001292052
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Analysis of Cutting Surface During Cutting of Electric Sheets
by: Spišák, E., et al.
Published: (2017)

The influence of mechanism and parameters of hardening of modified new laquer phenolformaldehyde resins on composite physicomechanical properties
by: O. V. Suberliak, et al.
Published: (2010)

Physicomechanical characteristics of VT6 titanium alloy after surface deformation-diffusion treatment
by: T. M. Kravchyshyn, et al.
Published: (2020)

Influence of the substrate potential upon deposition and the size factor on the structure, stress state, and physicomechanical characteristics of multilayer TiN/Ti coatings
by: O. V. Sobol, et al.
Published: (2011)

Specific electric resistance as an informative parameter for determination of the actual physicomechanical characteristics of materials of metal structures in long-term operation
by: O. M. Karpash, et al.
Published: (2009)

The influence of deposition technological process parameters on surface properties of multilayer coatings
by: Zykova, A., et al.
Published: (2009)

Effect of localplastic deformations on physicomechanical properties of material and the pipeline stress state
by: Ye. V. Kharchenko, et al.
Published: (2013)

Structure and physicomechanical properties of AISI 321 steel welded joints
by: L. I. Markashova, et al.
Published: (2016)

The influence of hydrogen on phase composition and physicomechanical properties of structural materials
by: V. V. Fedorov
Published: (2010)

Materials and equipment for surfacing of metal hot cutting knives
by: A. P. Zhudra, et al.
Published: (2015)

Physicomechanical properties of electric arc sprayed coating formed in supersonic mode
by: V. M. Hvozdetskyi, et al.
Published: (2024)

Investigation of the influence of microdispersed fillers on physicomechanical and thermal properties of epoxy composites
by: A. V. Buketov, et al.
Published: (2015)

Structure and physicomechanical properties of as-cast Ti–Nb–Mo titanium alloys
by: O. M. Myslyvchenko, et al.
Published: (2020)

Physicomechanical and corrosion-resistant properties of inhibited fast-hardening bitumen-latex emulsions
by: V. A. Chervatiuk, et al.
Published: (2015)

Features and regularity of zonal changes in the physicomechanical characteristics of Zakhidnyi Donbas rocks
by: T. A. Palamarchuk, et al.
Published: (2019)

Effect of flux-cored strip surfacing modes on geometric parameters of deposited beads
by: A. P. Zhudra, et al.
Published: (2017)

Effect of main technological parameters of plasma surfacing on properties of composite deposited metal
by: A. I. Belyj
Published: (2010)

Optimization of physicomechanical properties of anode material for fuel cells
by: B. D. Vasyliv, et al.
Published: (2015)

Physicomechanical properties of Cu–Al2O3 galvanic compositions.
by: M. D. Sakhnenko, et al.
Published: (2014)

Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
by: Jaworski, J., et al.
Published: (2016)

Surface hardening of fast-cutting HS6-5-2 steel under chemical heat treatment
by: M. Pashechko, et al.
Published: (2016)

Abrasive cutting factor as a characteristic reflecting the performance parameters of superabrasive grinding
by: V. I. Lavrinenko
Published: (2016)

Increase of hardness of surfacing of recovery details by economical microalloying
by: V. M. Vlasovets, et al.
Published: (2021)

Mechanical effect of gas flow on the surface of penetration channel walls in laser cutting
by: I. V. Shuba
Published: (2009)

Development of epoxy-polyester matrix with improved adhesion and physicomechanical properties using an isocyanate modificator
by: A. V. Buketov, et al.
Published: (2019)

Surface and sombinatorial cuttings in euclidean combinatorial optimization problems
by: O. S. Pichugina
Published: (2016)

Investigation of the effect of technological parameters on efficiency of chemical string cutting of semiconductor materials
by: Kravetsky, M.Yu., et al.
Published: (2002)

The influence of polyvinylpyrrolidone molecular weight on the physicomechanical properties of composite polyamide hydrogel membranes
by: O. V. Suberliak, et al.
Published: (2019)

Titanium coating on the carbon steel: direct-current and pulse electrodeposition, physicomechanical and chemical properties
by: V. V. Malyshev, et al.
Published: (2014)

The influence of surface parameters of coatings deposited by various vacuum-plasma methods on the cell/material interaction in vitro tests
by: Zykova, A., et al.
Published: (2007)

The study of fracture toughness and failure mechanisms of cutting_tool hardmetals with plasma-modified surface
by: S. S. Samotugin, et al.
Published: (2013)

Selection of parameters for the development of mineral deposits
by: A. O. Khorolskyi, et al.
Published: (2020)

Study of the effect of cutting speed on the cutting forces components and cutting temperature, roughness and waviness of the machined surface during finish turning of hardened HVG steel with PcBN cutters
by: Ye. Stakhniv, et al.
Published: (2022)

Stablization of mechanical systems with uncertain parameters
by: O. H. Mazko, et al.
Published: (2013)

The influence of the prerecrystallization treatment on physicomechanical properties of the plastically deformed metals and alloys and the spray coatings
by: O. M. Dubovyi, et al.
Published: (2010)

The SrB2 powder influence on physicomechanical properties of Fe–Cu–Ni–Sn composites sintered by vacuum hot pressing
by: V. A. Mechnyk, et al.
Published: (2020)

The process of abrasive processing as frictional interaction: a factor of the sludge availability on the cutting surface of diamond wheels
by: V. I. Lavrinenko
Published: (2020)

The influence of surface roughness of cutting inserts made of diamond–tungsten carbide composite on cutting forces and machining quality in turning aluminum alloys and brass
by: L. N. Devin, et al.
Published: (2018)

Ecologo-Geochemical Evaluation of Surface Deposits in Stremygorod Deposit Territory
by: M. V. Yazvynska
Published: (2016)

Intellectual System of Refusals Diagnosing and Cutting Part of Cutting Tools Renewal
by: A. G. Derevjanchenko
Published: (2013)