Buchumschlag

On the Strength and Crack Propagation Process of the Pre-C.&#039;racked Rock-Like Specimens under Uniaxial Compression

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	H. Haeri, K. Shahriar, M. F. Marji, P. Moarefvand
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Strength of Materials
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000576207
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Investigation of Fracturing Process of Rock-Like Brazilian Disks Containing Three Parallel Cracks under Compressive Line Loading
von: Haeri, H., et al.
Veröffentlicht: (2014)

Investigation of Fracturing Process of Rock-Like Brazilian Disks Containing Three Parallel Cracks under Compressive Line Loading
von: H. Haeri, et al.
Veröffentlicht: (2014)

Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
von: Haeri, H.
Veröffentlicht: (2015)

The limiting state parameters of rock specimen at uniaxial compression by rigid stamps
von: Ja. Lokshina, et al.
Veröffentlicht: (2012)

The limiting state parameters of rock specimen at uniaxial compression by rigid stamps taking into account internal and external friction
von: Ja. Lokshina, et al.
Veröffentlicht: (2013)

Experimental and Numerical Simulation of the Microcrack Coalescence Mechanism in Rock-Like Material
von: Haeri, H., et al.
Veröffentlicht: (2015)

Stress state of a plane wedge-shaped specimen with an edge crack under uniaxial tension
von: V. S. Kravets
Veröffentlicht: (2017)

The mechanical characteristic of rock salt under uniaxial compression with low temperature effect
von: Jie Chen, et al.
Veröffentlicht: (2016)

External and internal friction effect on the limiting state parameters for a compressed rock specimen
von: Ju. A. Kostandov, et al.
Veröffentlicht: (2011)

Analytical method for calculation of the strength of cylindrical rock specimens during their longitudinal stress
von: L. M. Vasyliev, et al.
Veröffentlicht: (2023)

Influence of notch radius on fatigue crack propagation in beam specimens of 2017A-T4 alloy
von: D. Rozumek, et al.
Veröffentlicht: (2017)

The improved method of calculation of the ultimate strength of rocks under axial compression
von: D. L. Vasilev
Veröffentlicht: (2013)

The effect of compressing residual stresses on the propagation of shear surface cracks in railway rails
von: O. P. Datsyshyn, et al.
Veröffentlicht: (2015)

Formation mechanisms and geometry of the crack assemble formed under uniaxial cyclic compression of NaCl single crystals
von: Boyko, Yu.I., et al.
Veröffentlicht: (2012)

Birefringence properties of uniaxially compressed K2SO4 crystals
von: Yo. Stadnyk, et al.
Veröffentlicht: (2013)

Birefringence properties of uniaxially compressed K2SO4 crystals
von: V. Y. Stadnyk, et al.
Veröffentlicht: (2013)

Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
von: T. Lagoda, et al.
Veröffentlicht: (2017)

Regularity of sedimentary rock compression
von: V. A. Baranov
Veröffentlicht: (2013)

Propagation of linearly polarized light in a heated uniaxial CdS crystal
von: S. V. Virko, et al.
Veröffentlicht: (2019)

Propagation of linearly polarized light in a heated uniaxial CdS crystal
von: Virko, S.V., et al.
Veröffentlicht: (2019)

The analytical method for calculating ultimate compression strength of the rock cylindrical samples at pyramidal truncated type of their destruction
von: L. M. Vasilev, et al.
Veröffentlicht: (2019)

The method of calculating compressive strength of the truncated conical rock samples at a constant contact shear stress
von: D. L. Vasilev, et al.
Veröffentlicht: (2013)

Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
von: Jameel, Azher, et al.
Veröffentlicht: (2016)

Propagation of surface crack-like defect in welded joints of steel 06GB-390 at cyclic loading
von: Ju. Barvinko, et al.
Veröffentlicht: (2012)

High-temperature creep of hard-alloy samples that are sintering under the conditions of uniaxial compression
von: V. P. Bondarenko, et al.
Veröffentlicht: (2017)

Evaluation of the stress intensity factor for transverse shear cracks in a beam specimen
von: P. S. Kun, et al.
Veröffentlicht: (2014)

The vortex generation in revolving uniaxial crystal during the propagating nearly perpendicular to its optical axis
von: B. V. Sokolenko, et al.
Veröffentlicht: (2013)

Transformation of compression waves during propagation in gaseous-liquid medium
von: O. N. Sizonenko
Veröffentlicht: (2016)

Effect of Platen Restraint on Stress–Strain Behavior of Concrete under Uniaxial Compression: A Comparative Study
von: Kumar, S., et al.
Veröffentlicht: (2016)

Strength of optical glass under conditions of axial compression
von: Okhrimenko, G.M., et al.
Veröffentlicht: (1985)

Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)

Destruction of composite materials with two parallel coaxial cracks at the compression along cracks
von: V. M. Nazarenko, et al.
Veröffentlicht: (2017)

Nonlinearity of the Rock Joint Shear Strength
von: Wei, Y.F., et al.
Veröffentlicht: (2015)

A model of fatigue crack propagation in metals
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)

Regularities of crack propagation in hybrid pumping rods
von: B. V. Kopei, et al.
Veröffentlicht: (2021)

Investigation and control of cracks propagation in boride coatings
von: S. M. Cherneha, et al.
Veröffentlicht: (2010)

Generation of optical vortices in rotating uniaxial crystal for light propagation along the perpendicular to its optical axis
von: Sokolenko, B.V., et al.
Veröffentlicht: (2013)

Plane strain state in compact specimen with stable crack with taking into account process of unloading
von: V. R. Bohdanov, et al.
Veröffentlicht: (2012)

Cyclic cracking resistance of brittle materials in compressive loading
von: Lanin, A.G.
Veröffentlicht: (2009)

Statistical analysis of compression strength of single grains of SHM powders and improvement of the strength assessment procedure
von: Ju. V. Sirota, et al.
Veröffentlicht: (2013)