Cover Image

Numerical Study of Stability Loss of Near-thesurface Short Fibers in a Purely Reinforced Compossite Material

Saved in:

Bibliographic Details
Date:	2021
Main Authors:	V. A. Dekret, V. M. Bystrov, V. S. Zelenskyi
Format:	Article
Language:	English
Published:	2021
Series:	International Applied Mechanics
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0001296259
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Stability Loss of Layered Composite under Compression of Reinforcing Layers by Surface Load
by: V. M. Bystrov, et al.
Published: (2017)

Edge Effect and Near-the-Surface Buckling in Layerd Composite Material under Imperfect Contact between Layers
by: V. M. Bystrov, et al.
Published: (2022)

Numerical Study of Stability of Layered Composite under Uni-Axial Compression of Filler Layers
by: V. A. Dekret, et al.
Published: (2014)

Model of Finite Size Fibers in the Three-Dimensional Theory of Stability of Composite Materials (Review)
by: A. N. Guz, et al.
Published: (2016)

Investigation of thermal stability organic plastics based of polysulfonamide reinforced by fiber Kevlar
by: A. I. Burja, et al.
Published: (2015)

Nearsurface buckling in laminate composite material with imperfect interlayer contact
by: V. M. Bystrov, et al.
Published: (2022)

Numerical Study of Edge Effect in Layered Composite Material under Compression of Filler Layers
by: V. M. Bystrov, et al.
Published: (2015)

Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
by: Huang, T., et al.
Published: (2016)

Research of structure and properties polytetrafluoroethylene reinforced fiber arselon
by: A. I. Burja, et al.
Published: (2017)

Prediction of fiber-reinforced concrete strength under compression
by: V. P. Sylovaniuk, et al.
Published: (2016)

Numerical study of the stability of composite materials on computers of hybrid architecture
by: A. N. Khimich, et al.
Published: (2018)

Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
by: Ji, S.J., et al.
Published: (2015)

Improvement of Strength and Radiation Protection Properties of Biodegradable Jute Fiber Reinforced Material
by: Verma, S., et al.
Published: (2017)

Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
by: V. R. Skalskyi, et al.
Published: (2020)

CT study of products from non-metallic composites reinforced by carbon fibers
by: Levenets, V.V., et al.
Published: (2022)

Calculation of the characte¬ristics of the multichannel queueing system with pure losses and feedback
by: A. Z. Melikov, et al.
Published: (2015)

Effect of optical losses irregularity on wideband fiber Raman amplification for total telecom window in silica fibers
by: Felinskyi, G.S., et al.
Published: (2013)

Effect of optical losses irregularity on wideband fiber Raman amplification for total telecom window in silica fibers
by: G. S. Felinskyi, et al.
Published: (2013)

Methods of strength and life time evaluation of fiber reinforced concretes (A review)
by: Ye. Andreikiv, et al.
Published: (2018)

Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
by: Kim, J.W.
Published: (2016)

Numerical prediction of effectiveness of reinforcement of defective pipelines by composite material bands
by: E. A. Velikoivanenko, et al.
Published: (2016)

Conditions for the stability of an impulsive linear equation with pure delay
by: Ivanov, I. L., et al.
Published: (2009)

Cellulose Obtaining from Short Flax Fiber by Oxidative and Organic Solvent Delignification
by: I. M. Dejkun, et al.
Published: (2011)

Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
by: Bounouas, L., et al.
Published: (2001)

Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
by: J. Y. Lee, et al.
Published: (2014)

Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
by: Lee, J.Y., et al.
Published: (2014)

Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
by: Daneshfar, M., et al.
Published: (2017)

Spectrum and frequency of numerical chromosomal abnormalities in material of early reproductive loss
by: I. R. Tkach, et al.
Published: (2015)

End effect and near-surface buckling in a laminate composite material compres sed by a surface load
by: V. M. Bystrov
Published: (2019)

On the issue of determining critical levels for the stability losses in composite materials
by: S. I. Skipochka, et al.
Published: (2013)

Elastic State of Inclusion in the Form of Short Fiber under Sliding Contact with Three-Dimensional Matrix
by: V. V. Mikhaskiv, et al.
Published: (2015)

Finite Element Analysis of Thermoelastic Fiber-Reinforced Anisotropic Hollow Cylinder with Dual-Phase-Lag Model
by: Hobiny, A.D., et al.
Published: (2018)

Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
by: Sheng, L.Y., et al.
Published: (2019)

Loss of cohesion between concrete and steel reinforcement under the influence of corrosion-hydrogenated environment
by: M. I. Hredil
Published: (2021)

Stability of a discretely reinforced plate in gas flow
by: B. A. Antufev
Published: (2013)

Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
by: Sheng, L.Y., et al.
Published: (2018)

Numerical simulations of short-timescale geomagnetic field variations
by: Sakuraba, A.
Published: (2010)

Numerical simulations of short-timescale geomagnetic field variations
by: A. Sakuraba
Published: (2010)

Numerical simulation of losses and heating in the constructional elements of transformers of ferromagnetic steel
by: Ivankov, V.F., et al.
Published: (2014)

Numerical simulation of losses and heating in the constructional elements of transformers of ferromagnetic steel
by: V. F. Ivankov, et al.
Published: (2014)