Buchumschlag

Preparation of the surface of hot-rolled strips for hot-dip galvanized

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
1. Verfasser:	V. G. Ivanchenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2014
Schriftenreihe:	Fundamental and applied problems of ferrous metallurgy
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000839794
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
von: Berto, F., et al.
Veröffentlicht: (2015)

Training hot rolled strips and sheets of especially thin
von: V. S. Panchenko, et al.
Veröffentlicht: (2014)

Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680
von: Ju. Prikhodko, et al.
Veröffentlicht: (2019)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
von: A. S. Makeeva, et al.
Veröffentlicht: (2016)

Theoretical and experimental research of hot rolling of aluminum strips for solar collector
von: Makeeva, A.S., et al.
Veröffentlicht: (2016)

Generalization of research results on the dynamics of continuous wide-strip hot-rolling mills
von: V. V. Verenev
Veröffentlicht: (2018)

Improvement of the surfacing technology for large backup rolls of hot rolling mills
von: L. K. Leshchynskyi, et al.
Veröffentlicht: (2021)

Calculating cyclical thermomechanical stresses in work rolls during hot strip rolling by finite element method
von: Ju. Prikhodko, et al.
Veröffentlicht: (2013)

Features of technological schemes and equipment for the production of thin strips on hot strip mill
von: S. O. Vorobei, et al.
Veröffentlicht: (2020)

Influence of crystallization parameters and the hot deformation on characteristics of steel structure of with roll rolling
von: S. E. Kondratiuk, et al.
Veröffentlicht: (2016)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
von: A. M. Nesterenko, et al.
Veröffentlicht: (2009)

Hot-cracking of high-alloyed steels evaluated by wedge rolling test
von: Schindler, I., et al.
Veröffentlicht: (2008)

Pecularities of electron beam welding of hot-rolled aluminum-lithium alloys
von: D. Drimal, et al.
Veröffentlicht: (2019)

Influence of nonmetallics on formation of pores during hot rolling of bearing steel
von: O. M. Moroz, et al.
Veröffentlicht: (2015)

Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2022)

Increased durability and efficiency of the use of circular hot saws in a modern rolling mill
von: G. V. Bergeman
Veröffentlicht: (2016)

Peculiarities of formation of joints between dissimilar metals in vacuum hot roll welding
von: I. M. Nekljudov, et al.
Veröffentlicht: (2011)

Improved hot pilger tube rolling by controlling the clearance between the sleeve and the dorn
von: V. F. Balakin, et al.
Veröffentlicht: (2015)

Process and property of hot-rolled stainless steel/carbon steel cladding bar
von: Zhining Jia, et al.
Veröffentlicht: (2016)

Electric-mechanical method for the preparation of steel surfaces by galvanized brush
von: V. M. Ledovskykh, et al.
Veröffentlicht: (2017)

Properties of CdTe thin films prepared by hot wall epitaxy
von: Bilevych, Ye.O., et al.
Veröffentlicht: (2004)

Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
von: Guan, B., et al.
Veröffentlicht: (2018)

Structure and properties of hot-rolled boiler tubes made from continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2016)

Formation of compounds of dissimilar metals in a solid phase by the method of hot rolling in vacuum
von: B. V. Borts
Veröffentlicht: (2011)

Features of formation of structure and properties in the hot-rolled steel alloyed with chromium, molybdenum and vanadium
von: T. N. Golubenko, et al.
Veröffentlicht: (2012)

Physical model of W and Ti compound during hot vacuum rolling in the solid phase
von: Andrieieva, O.L., et al.
Veröffentlicht: (2023)

Materials and equipment for surfacing of metal hot cutting knives
von: A. P. Zhudra, et al.
Veröffentlicht: (2015)

The estimation method to determine the influence of the factors in hot-rolled metal production technology on the stability of the mechanical properties
von: S. A. Vorobej, et al.
Veröffentlicht: (2017)

The structural heredity demonstration and its effect on the properties of hot-rolled tubing stocks of various diameters
von: T. V. Balakhanova, et al.
Veröffentlicht: (2020)

Investigation of the influence of hot asymmetric rolling on the formation of microstructure, mechanical properties and performance characteristics of finished products
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2019)

Structure of multilayer specimens, simulating surfaced tools for hot deforming of metals
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2013)

Hot electrons in beam-plasma discharge
von: Atamanov, V.M., et al.
Veröffentlicht: (2000)

Technological process control system (local) for hot breakdown bars cutting at the blooming shears in the sheet-rolling shop 1700
von: N. A. Kelij, et al.
Veröffentlicht: (2012)

Relativistic neoclassical fluxes in hot plasmas
von: Marushchenko, I.N., et al.
Veröffentlicht: (2013)

Complex desulfurization and degassing of hot metal with magnesium
von: A. S. Vergun, et al.
Veröffentlicht: (2018)

The solubility region of Ga in PbTe films prepared on Si-substrates by modified "hot wall" technique
von: Samoylov, A.M., et al.
Veröffentlicht: (2011)

Mechanisms of structure formation in hot-rolled boiler tubes during their production from non-deformed continuously cast billets
von: L. V. Opryshko, et al.
Veröffentlicht: (2015)

The peculiarities of rolling on combined strip mill
von: V. A. Nikolaev, et al.
Veröffentlicht: (2011)

Microstructure and properties of aluminum composites with carbide-containing master alloy and titanium carbide prepared by hot-forging
von: Yu. O. Shyshkina, et al.
Veröffentlicht: (2018)

Preparation of nanocrystalline Bi2Te3 via microwave-solvothermal synthesis and hot isostatic pressure
von: O. N. Maradudina, et al.
Veröffentlicht: (2012)