Cover Image

Kontrol of Degree Loosening of Hatch-End Packages of Tooth Zone of Stator Core of Turbogenerator with the Use of Capacitive Sensor

Saved in:

Bibliographic Details
Date:	2013
Main Authors:	A. S. Levytskyi, A. I. Novik, H. M. Fedorenko
Format:	Article
Language:	English
Published:	2013
Series:	Technical Electrodynamics
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000049764
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Physical modeling of tooth pressing defects stators of the turbogenerator
by: V. O. Titko, et al.
Published: (2019)

Automated device for monitoring the stator core of powerful turbogenerator
by: A. S. Levytskyi, et al.
Published: (2021)

Influence of the degree of fixing the winding at the end of the slot of the turbogenerator stator on thermomechanical characteristics of its core isolation
by: K. A. Kuchynskyi
Published: (2022)

Adjusting laws by the streams of cooling of extreme packages of core of stator of turbogenerators in the nominal mode for providing of minimum tangential unevenness of temperature
by: N. L. Sorokina
Published: (2016)

Control of efforts in tightening prisms of core in power generators with using capacitive sensors
by: A. S. Levytskyi
Published: (2019)

Capacity transduser of efforts in turbogenerator stator tighting prisms core with compensation of influence of out-of-parallelism electrodes
by: A. S. Levitskij, et al.
Published: (2017)

Elastic sensitive element for force transducers of the effort in the powerful turbogenerators stator tightening prisms core
by: A. S. Levytskyi, et al.
Published: (2018)

Study of efficiency the design of a stator core end zone of turbogenerator
by: O. H. Kensytskyi, et al.
Published: (2018)

Mechanical and vibromechanical characteristics of the pressure fingers and plates of the stator core of the turbogenerator
by: K. A. Kuchynskyi, et al.
Published: (2017)

Thermometric methods control of compression stator core state of powerful turbogenerators
by: Ye. O. Zaitsev, et al.
Published: (2021)

Modelling and distribution of electromagnetic forces operated on the teeth and the cores of stator winding of the turbogenerator
by: O. I. Tytko, et al.
Published: (2015)

Study of distribution the electromagnetic field and temperature in a stator core end zone of turbogenerator
by: O. H. Kensytskyi, et al.
Published: (2018)

A new shielding efficiency of stator core end packets of a powerful turbogenerator
by: D. I. Khvalin
Published: (2021)

Experimental research of heat exchange in axial channels of teeth of the core of the stator of a turbogenerator
by: K. A. Kuchynskyi, et al.
Published: (2019)

Study of physical processes in a turbogenerator end zone at the mechanical damages of stator core fastening
by: K. A. Kuchynskyi, et al.
Published: (2020)

Mechanical characteristics of the turbogenerator stator outhang at various options of fixing at a core end zone
by: K. A. Kuchynskyi, et al.
Published: (2019)

Electronic converters for work with capacitive sensor (analog and digital)
by: Ju. Neboljubov, et al.
Published: (2015)

Mathematical modelling of vibration processes in system fastening turbogenerator stator core at the sudden breakages coupling prisms
by: O. I. Tytko, et al.
Published: (2016)

The thermostressed state of isolation of the winding of the stator of the turbogenerator at various alternatives of its fastening in the end face of the core
by: K. A. Kuchinskij
Published: (2016)

Dynamics of force action in turbogenerators with different tooth-slot structures in nominal mode
by: V. I. Milykh, et al.
Published: (2014)

Experimental studies of the effectiveness of tooth-slot design screens of Turbo generators stators
by: O. I. Tytko, et al.
Published: (2017)

HALF-DIFFERENTIAL CAPACITIVE AIR GAP SENSOR FOR HYDROGENERATORS
by: Levytskyi , A., et al.
Published: (2024)

The calculation of redistribution a mechanical forces and vibrations in stator core fastening system of nuclear and thermal power plants turbogenerators
by: O. V. Vyhovskyi, et al.
Published: (2018)

A mathematical simulation of radial electromagnetic forces by occurrence the pressing out of end sheet of the stator core of a powerful turbogenerator
by: A. M. Melnyk
Published: (2016)

NUMERICAL FIELD ESTIMATION OF TURBOGENERATOR STATOR WINDING SHORTENING EFFICIENCY
by: Milykh, V. I., et al.
Published: (2014)

A heating of stator winding turbogenerator for failure the circulation of refrigerant
by: O. H. Kensytskyi, et al.
Published: (2018)

A distribution electromagnetic vibroexcitation forces of the stator of the powerful turbogenerator
by: O. I. Tytko, et al.
Published: (2014)

Review of some schemes of cooling of turbogenerators and control of humidity of cooling hydrogen
by: A. S. Levytskyi, et al.
Published: (2014)

The mathematical model, method and results of calculating the effort to tie the stretching prisms of stator core of the turbogenerator with the defect on the basis of method three moments
by: O. I. Tytko, et al.
Published: (2014)

Capacitive sensors of a shaft of a hydrogenerator with an active electrode in the form of a fragment of the lateral surface of the cylinder
by: A. S. Levytskyi
Published: (2012)

A capacitive sensor with parallel complanare electrodes system for measurement of air gap in hydrogenerators
by: A. S. Levytskyi, et al.
Published: (2023)

Increasing of the performance of measuring systems with capacitive sensors
by: V. G. Melnik, et al.
Published: (2019)

Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
by: Kuchynskyi, K. A., et al.
Published: (2023)

The electromagnetic vibration disturbing forces in turbogenerator with a glance of current asymmetry of stator winding
by: Yu. M. Vaskovskyi, et al.
Published: (2017)

Diagnostic features the technical condition of turbogenerators stator winding of Ukrainian nuclear power plants
by: O. V. Vyhovskyi
Published: (2020)

On Different Variants of Allowance for Loosening of Isotropic Materials
by: M. O. Babeshko, et al.
Published: (2022)

Determination of the response characteristic of the capacitive sensor of the air gap in the hydrogenerator SHK 538/160-70M
by: A. S. Levytskyi, et al.
Published: (2016)

Decrease in the damage of powerful turbogenerator stator caused by vibration in the end zones (analysis, hypotheses, experiment)
by: Shumilov, Yu. A., et al.
Published: (2014)

Analysis of influence quantity destroy pins of stator turbogenerator in the mechanical characteristics of a tightening prism
by: O. I. Tytko, et al.
Published: (2015)

Intensification of loosening of asbestos fibers by means of hydromechanical processing
by: O. M. Obodovych, et al.
Published: (2021)