Calculation of electrothermal processes in the induction channel furnace in the steady-state operation based on the theory of thermal circuits

Calculation of electrothermal processes in the induction channel furnace in the steady-state operation based on the theory of thermal circuits

Gespeichert in:

Bibliographische Detailangaben
Datum:	2021
Hauptverfasser:	A. A. Shcherba, O. D. Podoltsev, Yu. V. Peretiatko, V. M. Zolotarov, R. V. Bilianin
Format:	Artikel
Sprache:	English
Veröffentlicht:	2021
Schriftenreihe:	Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0001298933
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

Two approaches to the computation of electrothermal processes at induction heating of moving ingots – by field theory and thermal circuit theory
von: A. A. Shcherba, et al.
Veröffentlicht: (2021)

CALCULATION OF THE EQUIVALENT ELECTRICAL PARAMETERS OF THE INDUCTOR OF INDUCTION CHANNEL FURNACE WITH DEFECTS IN ITS LINING
von: Podoltsev, A. D., et al.
Veröffentlicht: (2018)

Calculation of the equivalent electrical parameters of the inductor of induction channel furnace with defects in its lining
von: Podoltsev, O.D., et al.
Veröffentlicht: (2018)

Numerical simulation of electromagnetic and thermal fields in induction channel furnaces with defects of lining
von: M. A. Shcherba
Veröffentlicht: (2018)

Modeling and Control of Long-Term Electromagnetic and Thermal Processes in Induction Channel Furnace for Copper Rod Production
von: A. A. Shcherba, et al.
Veröffentlicht: (2017)

Electromagnetic, thermal and hydrodynamic processes at induction heating of output channel of glass melting furnace
von: I. V. Volkov, et al.
Veröffentlicht: (2018)

Coupled electromagnetic and thermal processes in thermal insulation of induction channel furnaces during changes of its defects configuration
von: M. A. Shcherba
Veröffentlicht: (2018)

Numerical modelling of induction channel furnace thermal state
von: O. I. Bondar, et al.
Veröffentlicht: (2021)

Analysis of electromagnetic processes in the induction channel furnace used in the cable industry
von: V. M. Zolotarev, et al.
Veröffentlicht: (2016)

Intensification of heat and mass transfer in induction channel furnaces
von: O. I. Bondar, et al.
Veröffentlicht: (2022)

Electromagnetic parameters of two-phase induction channel furnace
von: O. I. Bondar, et al.
Veröffentlicht: (2020)

Electrothermal energy saving unit for high-frequency induction heating
von: A. K. Shydlovskyi, et al.
Veröffentlicht: (2015)

Calculation of steady-state characteristics of single-channel queueing systems using phase-type distributions
von: Yu. V. Zhernovyi
Veröffentlicht: (2018)

Modeling and analysis of electro-thermal processes in installations for induction heat treatment of aluminum cores of power cables
von: Shcherba, A. A., et al.
Veröffentlicht: (2024)

Circulation of the metal melt in the induction channel furnace at a phase control of supply voltage
von: Yu. M. Horyslavets, et al.
Veröffentlicht: (2020)

Features of Calculation of Electromagnetic Parameters of the Induction Crucible Furnace during Steelmaking
von: K. O. Kostyk, et al.
Veröffentlicht: (2021)

Modeling of coupled electromechanical and thermal processes in a linear permanent magnet motor based on the multiphysics circuit theory
von: O. D. Podoltsev, et al.
Veröffentlicht: (2020)

Electrothermal compacting of metallic materials
von: V. A. Shapovalov, et al.
Veröffentlicht: (2011)

СONDITIONS INVESTIGATIONS OF INDUCTION OF THE "STEADY" PLASMA RING IN THE ELECTRODYNAMIC ACCELERATOR
von: Sakun, O. V., et al.
Veröffentlicht: (2015)

Adaptive electrothermal protection of power converters
von: R. A. Baraniuk, et al.
Veröffentlicht: (2017)

Improvement of a Double-Circuit Equivalent Circuit of the Deep-Slot Induction Motors
von: V. F. Syvokobylenko
Veröffentlicht: (2016)

Three-dimensional simulation of system "induction channel furnace−liquid metal pump" of installation for prodaction of metal granules
von: O. I. Hlukhenkyi, et al.
Veröffentlicht: (2015)

ANALYSIS OF MUTUAL CAPACITANCE AND INDUCTANCE OF PRINTED CIRCUIT
von: Ivanov, V. G.
Veröffentlicht: (2014)

Electrothermal Installation for Processing of Waste of Aluminum Production
von: A. M. Verkhovliuk, et al.
Veröffentlicht: (2021)

Plasma attachments for intensification of metallurgical processes in induction furnaces
von: V. L. Najdek, et al.
Veröffentlicht: (2009)

Problems of the emergency thermal load calculation in the channels of the water-cooled nuclear reactors
von: G. I. Sharaevskij
Veröffentlicht: (2018)

Determination of steady-state characteristics of three-channel queueing systems with Erlangian service times
von: Ju. V. Zhernovyj, et al.
Veröffentlicht: (2017)

The impact of short circuits of the stator winding at operating characteristics of induction motors
von: M. S. Hutorova
Veröffentlicht: (2015)

Formulation of models to calculate the thermal boundary conditions in the channels of a turbine blade cooling system
von: Maravilla Errera, et al.
Veröffentlicht: (2013)

Effective loading of additional coke for regulating the thermal state of the furnace furnace
von: V. I. Bolshakov, et al.
Veröffentlicht: (2013)

Pulse electrothermal plasma accelerators and its application in the technologies
von: Kolyada, Yu.E., et al.
Veröffentlicht: (2015)

Transportation channels calculation method in MATLAB
von: Averyanov, G.P., et al.
Veröffentlicht: (2014)

Determining the steady-state characteristics of dual-channel queueing systems with Erlangian service times
von: Ju. Zhernovyj
Veröffentlicht: (2017)

Technology of smelting of heat-resistant alloys in the vacuum induction furnace
von: N. P. Volkotrub, et al.
Veröffentlicht: (2014)

Mathematical modeling and regulation of processes of complex electro-heat treatment of aluminum core of power cable
von: A. A. Shcherba, et al.
Veröffentlicht: (2022)

Applying of Electrothermal Fluidized Bed as the Outer Heating Element of Reactor
von: K. V. Semejko
Veröffentlicht: (2015)

Formulation of models to calculate the thermal boundary conditions in the channels of a turbine blade cooling system
von: Эррера, К. Маравилла, et al.
Veröffentlicht: (2015)

Formulation of models to calculate the thermal boundary conditions in the channels of a turbine blade cooling system
von: Эррера, К. Маравилла, et al.
Veröffentlicht: (2015)

Pulse electrothermal plasma accelerators and its application in scientific researches
von: Kolyada, Yu.E., et al.
Veröffentlicht: (2015)

Research of the Process of Immobilization of Ash Remnants of Energy Objects in an Electrothermal
von: K. V. Simeiko, et al.
Veröffentlicht: (2019)