Cover Image

Structure of low-carbon steel after a warm twist extrusion

Saved in:

Bibliographic Details
Date:	2013
Main Author:	O. H. Pashynska
Format:	Article
Language:	English
Published:	2013
Series:	Metal Science and Treatment of Metals
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000412239
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Twist extrusion
by: Y. Beygelzimer, et al.
Published: (2014)

Twist extrusion
by: Beygelzimer, Y., et al.
Published: (2014)

Twist extrusion: review
by: Beygelzimer, Y., et al.
Published: (2015)

Vortex Formation Under Twist Extrusion
by: Beygelzimer, Yu., et al.
Published: (2016)

Concentration stratification and structural changes in the Fe–Ni–Cr alloy after the warm twist deformation
by: B. M. Efros, et al.
Published: (2015)

Three-dimensional numerical analysis of twist extrusion process for annealed copper
by: Akbari Mousavi, S.A.A., et al.
Published: (2007)

Study of structure and physicochemical and mechanical properties in low-carbon steel after cyclic loading
by: Gorbachyov, L.A., et al.
Published: (2009)

Thin crystal structure low-carbon steels after deformational -thermal processing in an intercritical interval of temperatures
by: V. H. Razdobrieiev
Published: (2009)

Structure of the lateral extrusion in the carpathians
by: O. Hnylko
Published: (2017)

Study of structure and physico-chemical and mechanical properties in low-carbon steel after cyclic loading
by: L. A. Gorbachyov, et al.
Published: (2009)

Texture studies of the deformed ultra-low carbon steel after hydrostatic pressure torsion
by: V. Z. Kutsova, et al.
Published: (2017)

Fatigue life of steel specimens 40KH after wear-resistant surfacing with a sublayer of low-carbon steel
by: I. O. Riabtsev, et al.
Published: (2021)

Arc brazing of low-carbon steels
by: V. F. Khorunov, et al.
Published: (2013)

Effect of drawing dies with shear on the structure and the properties of low-carbon steel
by: E. G. Pashinskaja, et al.
Published: (2015)

Features of using a low-viscosity newtonian medium in an extrusion apparatus for three-dimensional printing
by: A. F. Bulat, et al.
Published: (2021)

Determination of warming modes for convoluted tubules of rat&#039;s testes after vitrification
by: N. O. Volkova, et al.
Published: (2021)

Specific Boundaries in Ferrite of Low-Carbon Steels
by: G. D. Sukhomlin
Published: (2013)

Direct martensitic transformations of low-carbon steels
by: Belykh, D.G., et al.
Published: (2023)

Phase transformations in low-carbon steels, alloyed a manganese
by: M. F. Evsjukov, et al.
Published: (2012)

A Basic Model of Global Warming
by: J. J. Jacobsen
Published: (2018)

Drawing with shear as an effective method of the control of the structure and the properties for low-carbon steel
by: Pashinskaya, E., et al.
Published: (2015)

Fatigue of low-carbon and low-alloys steels under conditions of Fretting
by: G. V. Tsybanev, et al.
Published: (2009)

Analysis of Warm Prestressing Effect on Fracture Toughness of Reactor Pressure Vessel Steels
by: Beleznai, R., et al.
Published: (2010)

Cyclical recrystallization of ferrite in the low-carbon hot-rolled steel
by: A. M. Nesterenko, et al.
Published: (2009)

Twist Automorphisms and Poisson Structures
by: Kimura, Yoshiyuki, et al.
Published: (2023)

Low carbon steel for hot metal deformation tools (review)
by: S. V. Bobyr, et al.
Published: (2019)

Changes in Structure and Regularities of Copper Hardening under Screw Extrusion
by: V. N. Varjukhin, et al.
Published: (2013)

Structural state study of high-purity titanium after severe plastic deformation and cryogenic quasi-hydrostatic extrusion by XRD methods
by: Boklag, E.E., et al.
Published: (2015)

Effect of manganese on structure and wear resistance of deposited metal of the low-carbon steel type
by: V. L. Malinov
Published: (2011)

Study of the effect of microalloying with boron on the corrosion behavior of low-carbon structural steel in different structural states
by: V. G. Razdobreev
Published: (2019)

The increase of corrosion monitoring validity for low-carbon steel in tap water
by: Yu. Herasymenko, et al.
Published: (2017)

The effect of low-temperature (77 K) quasi-hydrostatic extrusion on the properties of high-purity titanium: the role of initial structural state
by: M. A. Tikhonovskij, et al.
Published: (2013)

Methods of evaluation of increase of fatigue resistance in butt welded joints of low-carbon steels after high-frequency mechanical peening
by: V. A. Degtjarev
Published: (2019)

Formation of structural-phase states, defect substructure and properties of a surface of thermomechanically hardened low-carbon steel
by: V. E. Gromov, et al.
Published: (2016)

The influence of mechanical loading on the local remanence low-Carbon steels
by: Ju. V. Moiseev, et al.
Published: (2014)

Regularities and mechanisms of thermomechanical hardening of rolled low-carbon steel
by: V. E. Gromov, et al.
Published: (2011)

Regularities of formation of structure, texture and properties under the combined plastic deformation of the low-carbon and ultralow-carbon steels for cold press forming
by: Yu. S. Projdak, et al.
Published: (2019)

Regularities of formation of structure, texture and properties under the combined plastic deformation of the low-carbon and ultralow-carbon steels for cold press forming
by: Projdak, Yu.S., et al.
Published: (2019)

Twisted Fusion Products and Quantum Twisted -Systems
by: Lin, Mingyan Simon
Published: (2025)

One-dimensional warm electron transport in GaN quantum well wires at low temperatures
by: Sarkar, S.K.
Published: (2003)