Buchumschlag

Investigation of influence of plasticity materials on tensile strength of the composite joint

Gespeichert in:

Bibliographische Detailangaben
Datum:	2013
Hauptverfasser:	M. V. Dudyk, Yu. V. Dikhtiarenko
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	2013
Schriftenreihe:	Mathematical methods and physicomechanical fields
Online Zugang:	http://jnas.nbuv.gov.ua/article/UJRN-0000412511
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Ähnliche Einträge

The influence of joining material plasticity on the turning of interfacial crack at an angle point of the interface
von: M. V. Dudyk, et al.
Veröffentlicht: (2014)

Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: Fan, X.L., et al.
Veröffentlicht: (2014)

Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: X. L. Fan, et al.
Veröffentlicht: (2014)

The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: He, X., et al.
Veröffentlicht: (2013)

The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: X. He, et al.
Veröffentlicht: (2013)

Tensile strength of the brittle materials, probabilistic or deterministic approach?
von: Jeong, J., et al.
Veröffentlicht: (2006)

The &quot;trident&quot; model of the plastic zone at the end of the mode I crack terminating at the rough interface of materials
von: M. V. Dudyk, et al.
Veröffentlicht: (2014)

Investigation of the initial period of rotation of the interface crack at the angular point of the media interface.
von: M. V. Dudyk, et al.
Veröffentlicht: (2011)

Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016)

Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
von: Adib, H., et al.
Veröffentlicht: (2004)

Effect of Hydrogen on the Localization of Plastic Deformation under Tensile of Low-Carbon Steel
von: S. A. Barannikova, et al.
Veröffentlicht: (2014)

Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
von: Mucha, J., et al.
Veröffentlicht: (2015)

Increasing the Fatigue Strength of Welding Joints with Accumulasted Fatigue Damages by Surface Plastic Deformation
von: V. V. Knysh, et al.
Veröffentlicht: (2024)

Dynamic tensile strength of ceramic-matrix composites of the BL group, which are obtained in the cBN–carbide–Al systems
von: D. A. Stratiichuk, et al.
Veröffentlicht: (2024)

Assessment of contact strength of bolted joints of composite plates
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2019)

Microfractography of tensile tests surfaces of welded joints of austenitic and ferritic steels
von: B. Nasiłowska, et al.
Veröffentlicht: (2018)

The influence of service solutions on longitudinal and circumferential tensile properties of glass-polyester composite pipes
von: M. Stamenović, et al.
Veröffentlicht: (2011)

Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
von: Zapletal, J., et al.
Veröffentlicht: (2008)

The influence of service solutions on longitudinal and circumferential tensile properties of glass-polyester composite pipes
von: Stamenović, М., et al.
Veröffentlicht: (2011)

Influence of filler material on the structure and properties of welded joints of high-strength VT19 titanium alloy
von: S. V. Akhonin, et al.
Veröffentlicht: (2022)

The influence of welding energy on strength of high-strength S960QC steel joints
von: I. R. Dzioba, et al.
Veröffentlicht: (2019)

Effect of mode of electron beam welding, heat treatment and plastic deformation on strength of joints of aluminum 1570 alloy
von: V. V. Skriabinskyi, et al.
Veröffentlicht: (2020)

Influence of diluents and plasticizers on the properties of epoxy-polysulfide composites
von: K. M. Sukhyi, et al.
Veröffentlicht: (2021)

Features of mechanical strength theories of composition materials
von: T. A. Palamarchuk, et al.
Veröffentlicht: (2014)

Isothermal Crystallization Kinetics Effect on the Tensile Properties of PLA/PTT Polymer Composites
von: Tsou, C.-Y., et al.
Veröffentlicht: (2017)

Tool alloys plasticity and strength characteristics determination in microvolumes
von: V. V. Pashynskyi, et al.
Veröffentlicht: (2014)

Cyclic strength of damaged tee joint
von: P. S. Jukhimets, et al.
Veröffentlicht: (2015)

The influence of welds special location under welding on strength and fatigue crack growth resistance of joints
von: T. M. Labur, et al.
Veröffentlicht: (2016)

Nonlinearity of the Rock Joint Shear Strength
von: Wei, Y.F., et al.
Veröffentlicht: (2015)

Strength and plasticity of metal surface alloys nitrated in glow discharge
von: M. S. Stechyshyn, et al.
Veröffentlicht: (2018)

Structural criteria of strength and crack resistance of high-strength steels and their welded joints
von: O. M. Berdnikova
Veröffentlicht: (2021)

Ferrocene-containing epoxy-polyurethane compositions as perspective material for the plastics of bone defeats
von: N. A. Halatenko, et al.
Veröffentlicht: (2013)

The influence of filler dispersion on adhesion strength and residual pressure in epoxy composites
von: A. V. Buketov, et al.
Veröffentlicht: (2012)

The mechanical strength advance of radiation-hard plastic scintillators with diffusion enhancers
von: Velmozhnaya, E.S., et al.
Veröffentlicht: (2015)

Strength and specifics of fracture of welded joints of high-strength aluminium alloys at low temperature
von: T. M. Labur
Veröffentlicht: (2011)

Joining of steel and dissimilar material joints with highest strength — there are other ways than conventional welding
von: U. Reisgen, et al.
Veröffentlicht: (2019)

Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/HIPS/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 1. Study of Damping and Tensile Strengths
von: Rostamiyan, Y., et al.
Veröffentlicht: (2013)

Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/HIPS/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 1. Study of Damping and Tensile Strengths
von: Y. Rostamiyan, et al.
Veröffentlicht: (2013)

Theoretical shear strength and the onset of plasticity in nanodeformation of cubic boron nitride
von: S. N. Dub, et al.
Veröffentlicht: (2017)

Evaluation of strength of joints produced by welding with concurrent brazing
von: V. I. Savuljak, et al.
Veröffentlicht: (2015)