Cover Image

Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture

Saved in:

Bibliographic Details
Date:	2013
Main Author:	K. O. Kostyk
Format:	Article
Language:	English
Published:	2013
Series:	Journal of mechanical engineering
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000450101
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture
by: Костик, Катерина
Published: (2014)

Increased durability of power engineering parts to method of carbonitriding on the macrodispersed mixture
by: Костик, Катерина
Published: (2014)

Increasing of industry mixers shangeble parts durability
by: Ju. Posypajko, et al.
Published: (2011)

Tribological properties of carbonitride coatings formed on titanium by thermodiffusion method
by: O. I. Yaskiv, et al.
Published: (2011)

The method of assessing the effect of correction and wear of cylindrical gearing teeth on durability and strength.Part. I. Durability and wear
by: M. V. Chernets, et al.
Published: (2012)

Physicochemical properties of carbonitrided KhVH steel
by: M. S. Stechyshyn, et al.
Published: (2020)

Physicochemical properties of 40Kh carbonitrided steel
by: M. S. Stechyshyn, et al.
Published: (2020)

The T15K6 Alloy with complex coating for increasing durability of tools
by: S. M. Cherneha, et al.
Published: (2019)

Corrosion-mechanical wear of carbonitrided steel in an alkaline environment
by: M. S. Stechyshyn, et al.
Published: (2024)

Forecasting of durability of rubber parts by means of applied fracture criteria
by: V. I. Dyrda, et al.
Published: (2013)

Physical properties comparison between hafnium and vanadium carbonitride coatings
by: J. C. Caicedo, et al.
Published: (2020)

Chill mould design for manufacture of vital figurine cast parts of power engineering
by: B. P. Taran, et al.
Published: (2013)

Prediction of Precipitation of Carbonitrides and Carbides in Microalloyed Steel, Using Thermodynamics Calculations
by: A. I. Trotsan, et al.
Published: (2013)

The increase of AMg6M alloy durability due to energy processing in the creep conditions
by: V. P. Poshyvalov, et al.
Published: (2013)

Increased durability and efficiency of the use of circular hot saws in a modern rolling mill
by: G. V. Bergeman
Published: (2016)

The method of assessing the effect of correction and wear of cylindrical gearing teeth on durability and strength. Part. II. Contact fatigue
by: M. V. Chernets, et al.
Published: (2012)

Properties of carbonitride coatings of the TiCN system, processed by vacuum ARC deposition
by: S. A. Klymenko, et al.
Published: (2024)

Increasing the corrosion resistance of heat-resistant alloys for parts of power equipment
by: Vahrusheva, V.S., et al.
Published: (2022)

The Durability of Gas-Escape Channels of Boiler Installations by Modern Heat-Utilization Technologies Application Increase
by: N. M. Fialko, et al.
Published: (2011)

Effect of Deposition Parameters on Physicochemical, Mechanical, and Tribotechnical Properties and Structure of Nitride and Carbonitride Coatings
by: B. R. Zhollybekov, et al.
Published: (2013)

Methods of evaluation of contact durability of tribojoints elements (A review)
by: O. P. Datsyshyn, et al.
Published: (2016)

Reaktions of 1,2,3,4,5,6,7,8-octahydroakridine-4-carbonitride
by: V. I. Markov, et al.
Published: (2011)

Chill mould design for manufacture of vital figurine cast parts of power engineering
by: Таран, Борис Петрович, et al.
Published: (2014)

Chill mould design for manufacture of vital figurine cast parts of power engineering
by: Таран, Борис Петрович, et al.
Published: (2014)

Durability validation based on continual fracture mechanics for elements of power equipment constructions
by: Ju. V. Romashov
Published: (2012)

Durability validation based on continual fracture mechanics for elements of power equipment constructions
by: Ромашов, Ю. В.
Published: (2016)

Durability validation based on continual fracture mechanics for elements of power equipment constructions
by: Ромашов, Ю. В.
Published: (2016)

Biodiesel from microalgae: ways of increasing effectiveness of lipidsaccumulation by genetic engineering methods
by: V. I. Korkhovoj, et al.
Published: (2013)

Refugee Law for durable solution
by: O. I. Kotliar
Published: (2015)

The scientific, engineering methods and their integration as part of STEM education. The practical guide
by: Z. Bilyk, et al.
Published: (2019)

Special properties of librarian documents paper: research methods and durability factors
by: L. V. Mukha, et al.
Published: (2015)

Study on the Failure Mechanism of the Polymorphic Mixture for Remanifactured Machinery Parts
by: Liu, C.H., et al.
Published: (2018)

Plant biomass increase: recent advances in genetic engineering
by: Sakhno, L.O.
Published: (2013)

Plant biomass increase: recent advances in genetic engineering
by: L. O. Sakhno
Published: (2013)

Multicriteria power engineering problems and fuzzy set based methods of their solution
by: Ya. Ekel, et al.
Published: (2014)

Multicriteria power engineering problems and fuzzy set based methods of their solution
by: Ekel, P.Yа., et al.
Published: (2014)

The Durable Touristic Development Based on Regional Studies
by: V. Dinu, et al.
Published: (2008)

Probabilistic estimation of the cracked shaft durability
by: E. A. Strelnikova, et al.
Published: (2017)

AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 43: TRADITIONAL POWER ENGINEERING. THERMAL POWER PLANTS: STATE AND PROSPECTS OF THEIR DEVELOPMENT
by: Baranov, M. I.
Published: (2018)

AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 45: TRADITIONAL POWER ENGINEERING. HYDRAULIC POWER PLANTS: STATE AND PROSPECTS OF THEIR DEVELOPMENT
by: Baranov, M. I.
Published: (2018)