Effect of High-Cycle Alternating Loading and Heat Treatment on the Structure of Electrospark Chromium Coatings on 30HGSA Steel

Saved in:

Bibliographic Details
Date:	2013
Main Authors:	Yu. O. Vronska, N. V. Zaitseva, S. M. Zakharov, O. A. Shmatko
Format:	Article
Language:	English
Published:	2013
Series:	Metallophysics and advanced technologies
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000518014
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

The influence of loading on the deformation of surface layer of steels with boron-chromium coating
by: L. A. Arendar, et al.
Published: (2011)

Structure and properties of Cr-, Zr-, Ti-electrospark coatings on iron
by: H. H. Lobachova, et al.
Published: (2019)

Formation of multi layer electrospark coatings on iron in the carbonaceous mediums
by: K. M. Khranovska, et al.
Published: (2011)

Structure and properties of nanoparticles, produced by electrospark treatment of copper and silver
by: K. H. Lopatko, et al.
Published: (2009)

Phase transformations in nanoparticles produced by electrospark treatment of metallic granules
by: E. G. Aftandiljants, et al.
Published: (2014)

The structure and properties of nanoparticles produced by electrospark treatment of aluminum pellets
by: E. H. Aftandiliants, et al.
Published: (2016)

ZrN coatings on U8 steel obtained by electrospark alloying after a concentrated solar irradiation
by: Paustovsky, A.V., et al.
Published: (2008)

The surface state and nanoparticle structure are obtained by electrospark treatment of manganese granules
by: Ye. H. Aftandiliants, et al.
Published: (2019)

The surface state and nanoparticle structure are obtained by electrospark treatment of metal granules
by: E. H. Aftandiliants, et al.
Published: (2018)

Influence of structure of transitional zone of the alloyed layer on properties of details with electrospark coverings
by: N. V. Zaitseva
Published: (2014)

Kinetics of diffusion chromium plating of steels with Ni–Co–P coatings
by: O. V. Manko, et al.
Published: (2019)

Chromium-manganese materials for welding steels of increased strength without preheating heating and heat treatment
by: V. M. Kulik, et al.
Published: (2012)

Peculiarities of formation and properties of boron-chromium coatings, obtained on steels in lithium melt
by: V. V. Shyrokov, et al.
Published: (2010)

Characterization of tribological behavior of chromium and zinc coatings electrodeposited on a steel substrate
by: Rhaiem, S., et al.
Published: (2014)

Electrochemical chromium–diamond coating
by: Ju. Dolmatov, et al.
Published: (2015)

The effect of friction treatment on structure and mechanical properties of nickel and nickel-chromium coatings on copper
by: S. I. Sydorenko, et al.
Published: (2013)

Assessment of susceptibility of welded joints of heat-resistant chromium martensite steel to crack formation during heat treatment
by: Ju. Skulskij, et al.
Published: (2009)

System of rigging creating for surfaces electrospark hardening
by: A. G. Jasev, et al.
Published: (2016)

Alternative method for chromium-containing electroplating drains processing electrocoagulation
by: E. S. Melnik
Published: (2016)

Hardening of leading edges of turbine blades by electrospark alloying
by: Kalinina, N.E., et al.
Published: (2019)

Electrocoagulation water treatment from compaunds of hexavalent chromium
by: V. A. Bagrij, et al.
Published: (2013)

Registration and assessment of load cycles in pipelines
by: Torop, O., et al.
Published: (2009)

Getting coatings of chromium carbide on articles of complex profile and research of protective properties of the coating material
by: S. A. Krokhmal, et al.
Published: (2014)

Creation of chromium carbide steel with increased wear-resistance
by: O. M. Shevchenko, et al.
Published: (2012)

The structure of the chromium carbide steel that obtained by hot pressing
by: O. M. Shevchenko
Published: (2015)

Formation of deformation martensite in the chromium-nickel austenitic steels
by: H. V. Snizhnoi
Published: (2011)

Structural inhomogeneity in welded joints of heat-resistant steels of chromium-molybdenum-vanadium
by: M. O. Nimko, et al.
Published: (2021)

Tungsten coatings under fusion relevant heat loads
by: Thomser, C., et al.
Published: (2010)

The influence of lead melt on embrittlement of ferritic and austenitic chromium steels
by: V. M. Fedirko, et al.
Published: (2019)

Utilization of alternating current methods for manufacture of selective absorbing coatings for heat collectors
by: Klochko, N.P., et al.
Published: (2005)

Spark treatment of VT22 alloy by chromium and tungsten electrode materials
by: O. V. Paustovskyi, et al.
Published: (2011)

Sintering and properties of materials based on silicon, boron and titanium carbides obtained by electrospark sintering
by: V. V. Ivzhenko, et al.
Published: (2021)

Distribution of interstitial impurities in chromium coating, obtained by ion beam assisted deposition
by: A. Guglya, et al.
Published: (2003)

Distribution of interstitial impurities in chromium coating, obtained by ion beam assisted deposition
by: Guglya, A., et al.
Published: (2003)

Vacuum-activated chromium plating of steel 20 in a nanocrystalline powder
by: S. G. Rudenkij
Published: (2012)

Carbides transformations in obtaining a chromium carbide steel of the eutectic type
by: O. M. Shevchenko, et al.
Published: (2015)

Quasicrystal structure in Al – Cu – Fe PVD coatings
by: N. V. Zaitseva, et al.
Published: (2013)

The influence of thermal cycles work on degradation of heat-resistant steel properties
by: P. O. Marushchak, et al.
Published: (2010)

Structure and properties of diffusion coatings of aluminium, chromium and nickel on the BT6 titanium alloy
by: Ya. Smokovych, et al.
Published: (2013)

High-temperature oxidation resistance of composite materials and coatings on the titanium-chromium diboride base
by: V. P. Konoval
Published: (2015)