Cover Image

Effects of sintering temperature and addition of Fe and B4C on hardness and wear resistance of diamond reinforced metal matrix composites

Saved in:

Bibliographic Details
Date:	2013
Main Authors:	M. Şimşir, K. E. Öksüz
Format:	Article
Language:	English
Published:	2013
Series:	Superhard Materials
Online Access:	http://jnas.nbuv.gov.ua/article/UJRN-0000695954
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Library portal of National Academy of Sciences of Ukraine \| LibNAS

Institution

Library portal of National Academy of Sciences of Ukraine | LibNAS

Similar Items

Effects of sintering temperature and addition of Fe and B₄C on hardness and wear resistance of diamond reinforced metal matrix composites
by: Şimşir, M., et al.
Published: (2013)

Effect of CrB2 on microstructure, properties and wear resistance of sintered composite and the diamond retention in Fe–Cu–Ni–Sn matrix
by: V. A. Mechnyk, et al.
Published: (2021)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
by: Y. Tьlay, et al.
Published: (2019)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
by: Tulay Yildiz, et al.
Published: (2018)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
by: Tülay Yıldız, et al.
Published: (2019)

Investigation of the formation during sintering diamond-carbide plates with activation additions
by: V. Z. Turkevych, et al.
Published: (2017)

Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
by: A. Kurio, et al.
Published: (2012)

Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
by: Kurio, A., et al.
Published: (2012)

Trends in the creation and additional alloying of wear-resistant materials based on the Fe – Cr – C system
by: V. A. Masliuk, et al.
Published: (2018)

Study on PCD tool wear in hard milling of fully-sintered 3Y-TZP ceramics
by: J. Xu, et al.
Published: (2022)

Application of Fe–P–B alloys in developing wear-resistant composite materials
by: I. M. Spyrydonova, et al.
Published: (2013)

Microstructure and resistance to abrasive wear of vibration deposited metal of Fe–Cr–B cored wire
by: A. A. Voitovych, et al.
Published: (2016)

Peculiarities of wear and criteria of repairability of drill bits with diamond- hard alloy cutters
by: V. F. Khorunov, et al.
Published: (2012)

Fabrication of Aluminium AA7075 Reinforced by Zinc Metal Matrix Composites and Their Wear Behaviour Analysis
by: Dinesh, M., et al.
Published: (2017)

Effect of temperature on hardness and wear resistance of high-chromium cast irons deposited with flux-cored strips
by: A. P. Voronchuk, et al.
Published: (2019)

Effect of the diamond-metal binder interface on the thermal expansion coefficient and wear resistance of electrosinted diamond composites
by: A. S. Bieliaiev, et al.
Published: (2018)

Influence of copper additives and copper-titanium alloy for consolidation diamond powder when sintered under high pressure and high temperature
by: E. M. Lutsak, et al.
Published: (2017)

Novel wear-resistant superhard diamond composite polycrystalline material
by: A. A. Shulzhenko, et al.
Published: (2018)

Assessment of wear resistance of a core drilling bit with hybridite reinforcing inserts
by: M. V. Suprun, et al.
Published: (2015)

Application of diamond composite thermo-resistant material of increased wear-resistance for diamond smoothening of steel 40X
by: S. V. Sokhan, et al.
Published: (2018)

Influence of the CrB2 additive content on the structure, mechanical and operational properties of Сdiamond–(WC–Co) composite diamond-containing materials formed by spark plasma sintering
by: B. T. Ratov, et al.
Published: (2023)

Wear resistance of diamond-dolomite and diamond-strontium carbonate composites produced under HPHT-conditions
by: N. A. Bondarenko, et al.
Published: (2018)

Wear resistance of Fe–Mn–C–B eutectic coatings alloyed with Si, Ni and Cr
by: M. I. Pashechko
Published: (2010)

The use of the computer modeling for improving operational characteristics of hard-alloy matrices of high-pressure apparatuses intended for sintering diamond-hard alloy plates
by: S. I. Shestakov, et al.
Published: (2017)

Effect of concentration of hard particles on gas-abrasive wear resistance of composite alloys
by: A. P. Voronchuk
Published: (2009)

Electroerosive wear resistance of composites on copper base with very hard carbon particles
by: E. I. Drozdova, et al.
Published: (2016)

High-temperature creep of hard-alloy samples that are sintering under the conditions of uniaxial compression
by: V. P. Bondarenko, et al.
Published: (2017)

Obtaining of hard magnetic Nd – Fe – B nanocomposite
by: S. V. Koriahin, et al.
Published: (2010)

The influence of VC–Al additive on wear resistance of cBN-based composites
by: K. V. Slipchenko, et al.
Published: (2018)

Structure and mechanical properties of Al-Fe-Cr alloys for elevated temperatures, reinforced by nanoquasicrystalline particles additionally alloyed by Ti, Mo and Nb
by: Ju. V. Milman, et al.
Published: (2014)

Electrical resistivity of pressureless sintered aluminum nitride based composite with addition of nanosized silicon carbide
by: I. P. Fesenko, et al.
Published: (2017)

Justification of the wear – out rate of drilling tool by the nature of destruction of matrix of diamond – composit material
by: O. P. Vynohradova, et al.
Published: (2016)

Friction-wear behaviors of chemical vapor deposited diamond films at high temperatures
by: D. Kong, et al.
Published: (2019)

Friction-wear behaviors of chemical vapor deposited diamond films at high temperatures
by: Kong Dejun, et al.
Published: (2019)

Investigation of wear resistance of composite alloys under the conditions of gas-abrasive wear at elevated temperatures
by: A. P. Zhudra
Published: (2014)

Evaluation of polycrystalline diamond tools in milling of pre-sintered and fully-sintered zirconia ceramics
by: J. Xu, et al.
Published: (2022)

Investigation of the indenter penetration zone in the wear particle of the matrix of a diamond-containing rock-cutting tool
by: O. P. Vynohradova, et al.
Published: (2024)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
by: U. Зavdar, et al.
Published: (2014)

Thermal Analyses for Induction Sintering of Powder Metal Compacts up to Sintering Temperature
by: Çavdar, U., et al.
Published: (2014)

Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool
by: T. O. Prikhna, et al.
Published: (2022)